| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the CLI of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a buffer overflow. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
ERP |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the handling of certain Ethernet frames in Cisco IOS XE Software for Catalyst 9000 Series Switches could allow an unauthenticated, adjacent attacker to cause an egress port to become blocked and drop all outbound traffic.
This vulnerability is due to improper handling of crafted Ethernet frames. An attacker could exploit this vulnerability by sending crafted Ethernet frames through an affected switch. A successful exploit could allow the attacker to cause the egress port to which the crafted frame is forwarded to start dropping all frames, resulting in a denial of service (DoS) condition. |
| A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device.
This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller. |
| A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.
This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco Small Business RV042 Dual WAN VPN Routers and Cisco Small Business RV042G Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the API endpoints of Cisco Integrated Management Controller could allow an authenticated, remote attacker to bypass authorization and take actions on a vulnerable system without authorization.
The vulnerability is due to improper authorization checks on API endpoints. An attacker could exploit this vulnerability by sending malicious requests to an API endpoint. An exploit could allow the attacker to download files from or modify limited configuration options on the affected system.There are no workarounds that address this vulnerability. |
| A vulnerability in the Web Authentication feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting attack (XSS) on an affected device.
This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute a reflected XSS attack and steal user cookies from the affected device. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the disclosure of possible sensitive data or cause the Snort 3 Detection Engine to crash.
This vulnerability is due to an error in the logic of buffer handling when the MIME fields of the HTTP header are parsed. This can result in a buffer under-read. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to induce one of two possible outcomes: the unexpected restarting of the Snort 3 Detection Engine, which could cause a denial of service (DoS) condition, or information disclosure of sensitive information in the Snort 3 data stream. Due to the under-read condition, it is possible that sensitive information that is not valid connection data could be returned. |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
| A vulnerability in the Secure Copy Protocol (SCP) and SFTP feature of Cisco IOS XR Software could allow an authenticated, local attacker to create or overwrite files in a system directory, which could lead to a denial of service (DoS) condition. The attacker would require valid user credentials to perform this attack.
This vulnerability is due to a lack of proper validation of SCP and SFTP CLI input parameters. An attacker could exploit this vulnerability by authenticating to the device and issuing SCP or SFTP CLI commands with specific parameters. A successful exploit could allow the attacker to impact the functionality of the device, which could lead to a DoS condition. The device may need to be manually rebooted to recover.
Note: This vulnerability is exploitable only when a local user invokes SCP or SFTP commands at the Cisco IOS XR CLI. A local user with administrative privileges could exploit this vulnerability remotely. |
| A vulnerability in the boot process of Cisco Access Point (AP) Software could allow an unauthenticated, physical attacker to bypass the Cisco Secure Boot functionality and load a software image that has been tampered with on an affected device.
This vulnerability exists because unnecessary commands are available during boot time at the physical console. An attacker could exploit this vulnerability by interrupting the boot process and executing specific commands to bypass the Cisco Secure Boot validation checks and load an image that has been tampered with. This image would have been previously downloaded onto the targeted device. A successful exploit could allow the attacker to load the image once. The Cisco Secure Boot functionality is not permanently compromised. |
| A vulnerability in the web-based management interface of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have at least a low-privileged account on the affected device. |
| A vulnerability in the Protocol Independent Multicast Version 6 (PIM6) feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, low-privileged, remote attacker to trigger a crash of the PIM6 process, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper processing of PIM6 ephemeral data queries. An attacker could exploit this vulnerability by sending a crafted ephemeral query to an affected device through one of the following methods: NX-API REST, NETCONF, RESTConf, gRPC, or Model Driven Telemetry. A successful exploit could allow the attacker to cause the PIM6 process to crash and restart, causing potential adjacency flaps and resulting in a DoS of the PIM6 and ephemeral query processes. |
| A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to an out-of-bounds read when processing Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a service restart.Cisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A security vulnerability was discovered in the local status page functionality of Cisco Meraki’s MX67 and MX68 security appliance models that may allow unauthenticated individuals to access and download logs containing sensitive, privileged device information. The vulnerability is due to improper access control to the files holding debugging and maintenance information, and is only exploitable when the local status page is enabled on the device. An attacker exploiting this vulnerability may obtain access to wireless pre-shared keys, Site-to-Site VPN key and other sensitive information. Under certain circumstances, this information may allow an attacker to obtain administrative-level access to the device. |
| A vulnerability in the implementation of the CLI on a device that is running ConfD could allow an authenticated, local attacker to perform a command injection attack.
The vulnerability is due to insufficient validation of a process argument on an affected device. An attacker could exploit this vulnerability by injecting commands during the execution of this process. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privilege level of ConfD, which is commonly root. |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| A vulnerability in a debug function for Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform debug actions that could result in the disclosure of confidential information that should be restricted.
This vulnerability exists because of a debug service that incorrectly listens to and accepts incoming connections. An attacker could exploit this vulnerability by connecting to the debug port and executing debug commands. A successful exploit could allow the attacker to view sensitive debugging information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
