| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: hi846: Fix memleak in hi846_init_controls()
hi846_init_controls doesn't clean the allocated ctrl_hdlr
in case there is a failure, which causes memleak. Add
v4l2_ctrl_handler_free to free the resource properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume()
There is a memory leaks problem reported by kmemleak:
unreferenced object 0xffff888102007a00 (size 128):
comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s)
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi]
[<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi]
[<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi]
[<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170
[<ffffffff83c142a5>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.
Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl) |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ensure that VID header offset + VID header size <= alloc, size
Ensure that the VID header offset + VID header size does not exceed
the allocated area to avoid slab OOB.
BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197
Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555
CPU: 2 PID: 1555 Comm: syz-executor136 Tainted: G W
6.0.0-1868 #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29
04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x85/0xad lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold.13+0xb6/0x6bb mm/kasan/report.c:433
kasan_report+0xa7/0x11b mm/kasan/report.c:495
crc32_body lib/crc32.c:111 [inline]
crc32_le_generic lib/crc32.c:179 [inline]
crc32_le_base+0x58c/0x626 lib/crc32.c:197
ubi_io_write_vid_hdr+0x1b7/0x472 drivers/mtd/ubi/io.c:1067
create_vtbl+0x4d5/0x9c4 drivers/mtd/ubi/vtbl.c:317
create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline]
ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812
ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601
ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965
ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0x0
RIP: 0033:0x7f96d5cf753d
Code:
RSP: 002b:00007fffd72206f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96d5cf753d
RDX: 0000000020000080 RSI: 0000000040186f40 RDI: 0000000000000003
RBP: 0000000000400cd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400be0
R13: 00007fffd72207e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 1555:
kasan_save_stack+0x20/0x3d mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
__kasan_kmalloc+0x88/0xa3 mm/kasan/common.c:525
kasan_kmalloc include/linux/kasan.h:234 [inline]
__kmalloc+0x138/0x257 mm/slub.c:4429
kmalloc include/linux/slab.h:605 [inline]
ubi_alloc_vid_buf drivers/mtd/ubi/ubi.h:1093 [inline]
create_vtbl+0xcc/0x9c4 drivers/mtd/ubi/vtbl.c:295
create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline]
ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812
ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601
ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965
ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0x0
The buggy address belongs to the object at ffff88802bb36e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
256-byte region [ffff88802bb36e00, ffff88802bb36f00)
The buggy address belongs to the physical page:
page:00000000ea4d1263 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x2bb36
head:00000000ea4d1263 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffffea000066c300 dead000000000003 ffff888100042b40
raw: 0000000000000000 00000000001
---truncated--- |
| A flaw was found in the fixed buffer registration code for io_uring (io_sqe_buffer_register in io_uring/rsrc.c) in the Linux kernel that allows out-of-bounds access to physical memory beyond the end of the buffer. This flaw enables full local privilege escalation. |
| An issue was discovered in the Linux kernel before 5.13.3. lib/seq_buf.c has a seq_buf_putmem_hex buffer overflow. |
| In the Linux kernel 6.0.8, there is a use-after-free in inode_cgwb_move_to_attached in fs/fs-writeback.c, related to __list_del_entry_valid. |
| In the Linux kernel 6.0.8, there is a use-after-free in run_unpack in fs/ntfs3/run.c, related to a difference between NTFS sector size and media sector size. |
| afu_mmio_region_get_by_offset in drivers/fpga/dfl-afu-region.c in the Linux kernel through 6.1.12 has an integer overflow. |
| In the Linux kernel before 5.17, an error path in dwc3_qcom_acpi_register_core in drivers/usb/dwc3/dwc3-qcom.c lacks certain platform_device_put and kfree calls. |
| IBM Aspera Faspex 5.0.5 transmits sensitive information in cleartext which could be obtained by an attacker using man in the middle techniques. IBM X-Force ID: 244121. |
| A use-after-free flaw was found in the Linux kernel’s Ext4 File System in how a user triggers several file operations simultaneously with the overlay FS usage. This flaw allows a local user to crash or potentially escalate their privileges on the system. Only if patch 9a2544037600 ("ovl: fix use after free in struct ovl_aio_req") not applied yet, the kernel could be affected. |
| In the Linux kernel, the following vulnerability has been resolved:
bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
When using bpftool to pin {PROG, MAP, LINK} without FILE,
segmentation fault will occur. The reson is that the lack
of FILE will cause strlen to trigger NULL pointer dereference.
The corresponding stacktrace is shown below:
do_pin
do_pin_any
do_pin_fd
mount_bpffs_for_pin
strlen(name) <- NULL pointer dereference
Fix it by adding validation to the common process. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/apple-aic: Fix refcount leak in aic_of_ic_init
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/apple-aic: Fix refcount leak in build_fiq_affinity
of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
We need to release directory fid if we fail halfway through open
This fixes fid leaking with xfstests generic 531 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Patchwork: https://patchwork.freedesktop.org/patch/488473/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Latest kernel will explode on the PHY interrupt config, since it depends
now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
...
Call Trace:
[<8050e8a8>] at803x_config_intr+0x5c/0xd0
[<80504b34>] phy_request_interrupt+0xa8/0xd0
[<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
[<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
[<8074d8ec>] dsa_slave_create+0x270/0x420
[<80743b04>] dsa_port_setup+0x12c/0x148
[<8074580c>] dsa_register_switch+0xaf0/0xcc0
[<80511344>] ar9331_sw_probe+0x370/0x388
[<8050cb78>] mdio_probe+0x44/0x70
[<804df300>] really_probe+0x200/0x424
[<804df7b4>] __driver_probe_device+0x290/0x298
[<804df810>] driver_probe_device+0x54/0xe4
[<804dfd50>] __device_attach_driver+0xe4/0x130
[<804dcb00>] bus_for_each_drv+0xb4/0xd8
[<804dfac4>] __device_attach+0x104/0x1a4
[<804ddd24>] bus_probe_device+0x48/0xc4
[<804deb44>] deferred_probe_work_func+0xf0/0x10c
[<800a0ffc>] process_one_work+0x314/0x4d4
[<800a17fc>] worker_thread+0x2a4/0x354
[<800a9a54>] kthread+0x134/0x13c
[<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
too. |
