| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Transient DOS while decoding attach reject message received by UE, when IEI is set to ESM_IEI. |
| Out-of-bounds read vulnerability exists in Sharp Corporation and Toshiba Tec Corporation multiple MFPs (multifunction printers), which may lead to a denial-of-service (DoS) condition. |
| A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947. |
| A vulnerability in the embedded test subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers could allow an authenticated, local attacker to write arbitrary values to arbitrary locations in the memory space of an affected device. The vulnerability is due to the presence of certain test commands that were intended to be available only in internal development builds of the affected software. An attacker could exploit this vulnerability by using these commands on an affected device. A successful exploit could allow the attacker to write arbitrary values to arbitrary locations in the memory space of the affected device. |
| A vulnerability in the embedded test subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers could allow an authenticated, local attacker to write arbitrary values to arbitrary locations in the memory space of an affected device. The vulnerability is due to the presence of certain test commands that were intended to be available only in internal development builds of the affected software. An attacker could exploit this vulnerability by using these commands on an affected device. A successful exploit could allow the attacker to write arbitrary values to arbitrary locations in the memory space of the affected device. |
| A vulnerability in ClamAV versions prior to 0.100.2 could allow an attacker to cause a denial of service (DoS) condition. The vulnerability is due to an error related to the MEW unpacker within the "unmew11()" function (libclamav/mew.c), which can be exploited to trigger an invalid read memory access via a specially crafted EXE file. |
| Tungsten Automation Power PDF PNG File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tungsten Automation Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24466. |
| IrfanView ECW File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of ECW files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-23971. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24857. |
| IrfanView CGM File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of CGM files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24858. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24860. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24868. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24871. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24872. |
| IrfanView DXF File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DXF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24873. |
| A vulnerability classified as critical has been found in emqx neuron up to 2.10.0. Affected is the function handle_add_plugin in the library cmd.library of the file plugins/restful/plugin_handle.c. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. |
| An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet data. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier and the header length. If the allocate fails because the specified packet is too large, no exception handling occurs and hciTrSerialRxIncoming continues to write bytes into the 4-byte large temporary header buffer, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to the buffer that is supposed to receive the contents of the packet body but which couldn't be allocated. One can then overwrite the state variable used by the function to determine which step of the parsing process is currently being executed. This advances the function to the next state, where it proceeds to copy data to that arbitrary location. The packet body is then written wherever the corrupted data pointer is pointing. |
| An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet header by looking up the identifying first byte and matching it against a table of possible lengths. The initial parsing function, hciTrSerialRxIncoming does not drop packets with invalid identifiers but also does not set a safe default for the length of unknown packets' headers, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to a not-yet-allocated buffer that is supposed to receive the contents of the packet body. One can then overwrite the state variable used by the function to determine which state of packet parsing is currently occurring. Because the buffer is allocated when the last byte of the header has been copied, the combination of having a bad header length variable that will never match the counter variable and being able to overwrite the state variable with the resulting buffer overflow can be used to advance the function to the next step while skipping the buffer allocation and resulting pointer write. The next 16 bytes from the packet body are then written wherever the corrupted data pointer is pointing. |
| A vulnerability has been identified in JT2Go (All versions < V14.3.0.1), Teamcenter Visualization V13.3 (All versions < V13.3.0.12), Teamcenter Visualization V14.0 (All versions), Teamcenter Visualization V14.1 (All versions < V14.1.0.11), Teamcenter Visualization V14.2 (All versions < V14.2.0.6), Teamcenter Visualization V14.3 (All versions < V14.3.0.1), Tecnomatix Plant Simulation V2201 (All versions < V2201.0010), Tecnomatix Plant Simulation V2302 (All versions < V2302.0004). The affected application is vulnerable to heap-based buffer overflow while parsing specially crafted WRL files. This could allow an attacker to execute code in the context of the current process. (ZDI-CAN-20824) |
| An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. This value is assumed to be greater than or equal to 3, but the software doesn't ensure that this is the case. Supplying a length less than 3 leads to a buffer overflow in a buffer that is allocated later. It is simultaneously possible to cause another integer overflow by supplying large length values because the provided length value is increased by a few bytes to account for additional information that is supposed to be stored there. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated. |
