| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an out-of-bounds write. |
| The NVS backend of the Zephyr settings subsystem (subsys/settings/src/settings_nvs.c) reads stored setting-name entries into fixed 74-byte stack buffers and NUL-terminates them with buf[rc] = '\0', where rc is the return value of nvs_read(). Per its contract, nvs_read() returns the full stored entry length (wlk_ate.len), which can exceed the supplied buffer length — only MIN(len, stored_len) bytes are actually copied, but the return value may be much larger, bounded only by the NVS sector size. Three sites (settings_nvs_cache_match(), settings_nvs_load(), and settings_nvs_save()) used this value directly as the NUL index without clamping, so an oversized stored name entry causes a single \0 byte to be written past the end of the stack buffer at an attacker-influenced offset (CWE-787).
The oversized entry cannot arise through the normal settings API, where names are bounded by SETTINGS_MAX_NAME_LEN. It requires an actor able to write the flash that backs the settings partition — a co-resident or untrusted component sharing the flash device, a malicious settings image/restore, or offline/physical flash access (a shared-flash threat model). The malformed entry is parsed when settings_load() runs at boot or subsystem init, or during settings_save().
The out-of-bounds write is a single NUL byte at an offset equal to the crafted entry length (up to the NVS sector size), so the practical impact is a crash or denial of service and limited stack corruption rather than reliable code execution. There is no confidentiality impact, and the path is not reachable from the network through the ordinary settings interface. The fix skips any entry whose nvs_read() length is greater than or equal to the buffer size before performing the NUL store. |
| The IPv6 neighbor-discovery code in subsys/net/ip/ipv6_nbr.c processes the 6LoWPAN Context Option (6CO, RFC 6775) carried inside ICMPv6 Router Advertisements. In handle_ra_6co() the 8-bit context_len field is taken directly from the packet and was never bounded to the RFC maximum of 128. The function computes context->context_len / 8 and then performs memset(context->prefix + context_len, 0, sizeof(context->prefix) - context_len), where context->prefix is a fixed 16-byte array.
With context_len between 136 and 255 (and the option length field set to 3, which the pre-fix validation accepts), context_len / 8 evaluates to 17..31, so the memset length 16 - context_len/8 underflows the unsigned size_t argument to roughly SIZE_MAX. This produces an unbounded out-of-bounds memset that zeroes kernel memory well past the 6lo context structure.
The defect is reachable from unauthenticated, link-local input: any host on the same link can send a crafted Router Advertisement with a 6CO option. The RA handler validates only the option length field before calling handle_ra_6co(), so a single packet triggers the wild write. The code is compiled when CONFIG_NET_6LO_CONTEXT is enabled.
The impact is a reliable remote (adjacent) denial of service via memory corruption, with collateral integrity loss as the memset zeroes contiguous memory before the system faults. Router Advertisements are link-scoped and not forwarded, so the attacker must be on the same link (AV:A). The fix rejects any context_len greater than 128 before the length computation. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an out-of-bounds write. |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10981454 (Note: For MT6880, MT6890, MT6988, MT6990) / AUTO00851293 (Note: For MT2735, MT2737); Issue ID: MSV-7638. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a heap buffer overflow. |
| Integer wraparound in IVFFlat index build in pgvector before 0.8.6 allows a database user to write data out-of-bounds, which could lead to arbitrary code execution. Only 32-bit systems are affected. |
| The HL7800 cellular modem driver's +CGCONTRDP: response handler on_cmd_atcmdinfo_ipaddr() in drivers/modem/vendor_standalone/hl7800.c parses the PDP-context dynamic parameters (local address, subnet mask, gateway, and DNS servers) that the cellular network assigns to the device. The response is linearized into a 256-byte stack buffer, after which each address field length is computed from comma/. delimiter positions in the network-supplied data and used directly as the length argument to strncpy() into the fixed 64-byte stack buffer temp_addr_str (and the 16-byte iface_ctx.dns_v4_string).
Because the field length is derived from attacker-controlled delimiter positions and was not bounded against the destination buffer, a single field can be far larger than 64 bytes. A malicious or impersonated cellular network (for example a rogue base station) can return a crafted +CGCONTRDP response with an overlong address field, causing strncpy() to write past temp_addr_str on the modem worker thread's stack, plus an out-of-bounds NUL write at temp_addr_str[addr_len].
No device-side privileges or user interaction are required: the device itself issues the AT+CGCONTRDP=1 query during normal network attach and parses whatever the network returns. The overflow corrupts adjacent stack memory in supervisor context, yielding at minimum a remotely triggerable crash and potentially control-flow hijacking on targets without stack protection.
The fix bounds every field length against its destination buffer (temp_addr_str and dns_v4_string) before each copy, rejecting overlong fields. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when parsing the Multicast DNS fields of the HTTP header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
| A flaw was found in the GIMP image manipulation program, specifically within its Seattle Filmworks file loader. A remote attacker could exploit this vulnerability by tricking a user into opening a specially crafted Seattle Filmworks file. This could lead to a heap overflow, allowing the attacker to write several kilobytes of controlled data beyond the intended memory buffer. Such an overflow can result in memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| A flaw was found in GIMP's file format plugins, including those for PSD and PAA files. A remote attacker could exploit these vulnerabilities by tricking a user into opening a specially crafted image file. This could lead to unexpected application behavior or other potential security impacts without requiring further user interaction. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to obtain sensitive information and cause a denial of service due to an out-of-bounds write. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. From 1.0.0 until 4.14.6 and 5.0.0-beta2, HandleSecureMessage() in src/remoted/secure.c passes a pointer inside its stack buffer to ReadSecMSG(), and src/os_crypto/shared/msgs.c decompresses up to OS_MAXSTR bytes at that offset. For an encrypted agent message on TCP port 1514 that expands to 65,536 bytes, os_zlib_uncompress() writes a terminating null byte beyond the end of the destination buffer. The resulting stack out-of-bounds write in the root-level remoted daemon can crash message processing and disrupt agent communications. This issue is fixed in versions 4.14.6 and 5.0.0-beta2. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7748. |
