| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libsoup's WebSocket implementation when using the permessage-deflate extension. The extension's decompression loop (inflate()) processes data in chunks without enforcing an upper boundary limit on the output buffer size. While libsoup limits the incoming compressed frame size via max_incoming_payload_size, it fails to track or limit memory allocation during decompression. A separate check for decompressed size (max_total_message_size) exists but executes only after inflation is complete, and it is entirely disabled by default for client connections. A remote, unauthenticated attacker can exploit this by sending a small, highly compressed payload (a decompression bomb), causing unbounded memory allocation that triggers an Out-of-Memory (OOM) crash and a Denial of Service (DoS). |
| Jawn is an open source JSON parser. Prior to 1.7.0, Jawn's AsyncParser can perform quadratic work when a single JSON token is delivered across many small chunks because each absorb call rescans the incomplete token from the start. A remote attacker who controls untrusted JSON input and its chunk sizes can exhaust CPU resources and cause denial of service in applications using AsyncParser. This issue is fixed in version 1.7.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The runtime-parameters lookup path coerces the URL :component segment to an atom with rabbit_data_coercion:to_atom/1 in lookup_component/1 (deps/rabbit/src/rabbit_runtime_parameters.erl), creating a new atom for any previously unseen value. A safe helper, rabbit_registry:binary_to_type/1, which uses binary_to_existing_atom with a catch, already exists but is not used at this call site. lookup_component/1 calls rabbit_data_coercion:to_atom(Component) on the :component segment of the request URL, converting an attacker-supplied string into a new atom. Because the Erlang atom table is bounded and atoms are never garbage collected, an authorized policymaker issuing roughly one million requests with distinct component values can exhaust the atom table and crash the node, resulting in a denial of service. Preconditions include Exploitation requires policymaker privileges and roughly one million requests.. This issue is fixed in versions 4.2.7 and 4.3.1. |
| IBM WebSphere Application Server and IBM WebSphere Application Server - Liberty are affected by a denial of service vulnerability in the HTTP channel due to unbounded allocation of resources without limits. |
| A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed. |
| Missing upper bound on the key derivation iteration count accepted during SCRAM authentication to a backend server in PgBouncer through 1.25.2 allows a malicious or compromised PostgreSQL backend to cause uncontrolled CPU consumption in PgBouncer. The resulting key derivation cannot be interrupted in frontend builds such as PgBouncer. Because PgBouncer serves all clients from a single process, one backend can in this way stop it from serving traffic for every other database and client it is pooling, so the failure of a single backend is not contained. |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat during sending of WebSocket close message enabled a DoS attack.
This issue affects Apache Tomcat: from 11.0.0-M5 through 11.0.25, from 10.1.8 through 10.1.59, from 9.0.74 through 9.0.121.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.88 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.0 until 7.0.17 and 8.0.6, the MQTT parser in rust/src/mqtt/mqtt.rs permits repeated PUBREC or PUBREL messages to be appended to one transaction without a limit. Crafted MQTT traffic can grow transaction state indefinitely, consuming CPU and memory and causing slowdown or denial of service. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the SMB parser can retain force-completed transactions on flows where Suricata sees payload in only one direction, including async-oneside flows, because cleanup waits for inspection in the unseen direction. The transaction creation paths in rust/src/smb can exceed the intended SMB_MAX_TX bound, and cleanup repeatedly scans the growing list. Sustained one-directional SMB traffic can therefore cause unbounded per-flow state and CPU and memory exhaustion. This issue is fixed in versions 8.0.6 and 7.0.17. |
| A vulnerability has been found in O-RAN-SC SMO OAM 2025-06-10. Affected is an unknown function of the component VES Collector. Such manipulation of the argument additionalFields.padding leads to uncontrolled memory allocation. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through a bug report but has not responded yet. |
| A security vulnerability has been detected in vgmstream. The affected element is the function init_vgmstream_awb_memory of the file src/meta/awb.c of the component AWB parser. Such manipulation leads to divide by zero. The attack can be executed remotely. The name of the patch is ae37662ad626254ddd96ad69ac263792d7a92024. A patch should be applied to remediate this issue. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Final and 4.2.17.Final, io.netty.handler.codec.sctp.SctpMessageCompletionHandler limits incomplete messages and fragment counts but not maxBufferedBytes, allowing unauthenticated peers to exhaust memory with large SCTP fragments. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Forward-reference completion for @JsonIdentityInfo object IDs in FasterXML jackson-databind performs a linear scan of the pending-reference accumulator for every resolved ID. The affected paths are CollectionDeserializer.CollectionReferringAccumulator.resolveForwardReference() and the equivalent implementation in MapDeserializer. When a document first creates N unresolved object-ID references in an identity-enabled collection or map and then defines those same IDs in reverse order, completion performs on the order of N * (N + 1) / 2 identity comparisons, so a shallow document whose size grows linearly causes quadratic CPU work during deserialization. The reporter instrumented equals() calls on the ID class and measured exactly 2,003,000 comparisons at N = 2,000, against zero comparisons in the pending-reference lookup path for an equally sized control in which every reference was already resolved. The input requires no deep nesting and no syntactically unusual JSON. Exploitation requires an application that deserializes attacker-influenced JSON into an identity-enabled collection or map. The fix replaces the repeated linear lookup with a keyed pending-reference structure. |
| TypeDeserializerBase._findDeserializer() in FasterXML jackson-databind caches the resolved deserializer under the raw, attacker-supplied type ID. When name-based polymorphism is configured with a fallback, for example @JsonTypeInfo(use = Id.NAME, defaultImpl = ...), every distinct unrecognized type ID resolves to the same fallback deserializer but is retained as its own key in the _deserializers map. That map has no configurable bound and lives for the lifetime of the type deserializer, so an attacker who can repeatedly supply fresh unknown type IDs causes monotonic memory retention across requests. The reporter observed 10,000 retained entries from 10,000 distinct unknown IDs, against a single entry for a control that repeated one unknown ID the same number of times, isolating attacker-controlled key cardinality from request volume. Exploitation requires an application that enables name-based polymorphism with a defaultImpl or equivalent fallback, accepts attacker-influenced type IDs, and reuses a long-lived ObjectMapper across requests. The fix stops caching fallback resolutions for unrecognized IDs and bounds both the number of cached entries and the length of a cacheable type ID. |
| UTF8DataInputJsonParser._reportInvalidToken() in FasterXML jackson-core builds the offending-token text for its error message by appending Java identifier characters to a StringBuilder in a loop that has no upper bound. Unlike the three sibling parser implementations, including UTF8StreamJsonParser, it never consults ErrorReportConfiguration.getMaxErrorTokenLength() (default 256). A malformed token supplied to a parser created through JsonFactory.createParser(DataInput) is therefore accumulated in full. No StreamReadConstraints setting mitigates this: maxDocumentLength cannot be applied to DataInput sources at all, and maxStringLength does not cover this path because the accumulation bypasses ReadConstrainedTextBuffer. The reporter measured a 20,000,109-character exception message from a 20-million-character malformed token on the DataInput path, against 367 characters for identical input on the InputStream path. Scaling the payload drives the StringBuilder, which also incurs byte-to-char expansion and internal array doubling, to many times the raw payload size and can trigger OutOfMemoryError for the whole JVM. UTF8DataInputJsonParser was introduced in 2.8.0 together with createParser(DataInput); releases before 2.8.0 do not contain the affected class. |
| icalendar is an RFC 5545 compatible parser and generator of iCalendar files for Python. From 6.1.0 until 7.2.2, vInt.from_ical accepts an attacker-controlled VALARM REPEAT value and applications that request alarm times can eagerly expand it without an application-level limit. Alarms.times and Alarms.active reach the unbounded expansion in versions starting with 6.1.0, while Alarm.triggers adds a second affected path starting with 7.0.0. Parsing alone does not trigger the issue, but accessing these properties can consume excessive CPU time and heap memory and terminate or stall a service. This issue is fixed in version 7.2.2. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote authenticated attacker to cause a denial of service due to improper enforcement of storage limits. |
