| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Filament is a collection of full-stack components for accelerated Laravel development. From filament/actions 4.0.0 until 4.11.4 and 5.6.4 and from filament/tables 3.0.0 until 3.3.51, the recordSelectOptionsQuery() method may be used to scope the options available in the Select field for AttachAction and AssociateAction. However, the built-in validation rule for these fields did not apply the same scope. As a result, a user who can trigger these actions could tamper with the Livewire component's state and submit an out-of-scope value. This vulnerability is fixed in filament/actions 4.11.4 and 5.6.4 and filament/tables 3.3.51. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.11.5 and 5.6.5, the ImageColumn and ImageEntry components render raw database values without escaping HTML. Where the data passed to these components isn't validated, an attacker could plant malicious HTML or JavaScript and achieve stored XSS that executes for users who view the table or schema. This vulnerability is fixed in 4.11.5 and 5.6.5. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.11.5 and 5.6.5, the login page has an observable timing discrepancy that allows unauthenticated attackers to enumerate registered email addresses. The impact is limited to disclosing whether an account exists for a given email. This vulnerability is fixed in 4.11.5 and 5.6.5. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.11.5 and 5.6.5, a flaw in the handling of recovery codes for app-based multi-factor authentication allows the same recovery code to be reused via concurrent submission. This issue does not affect email-based MFA. It also only applies when recovery codes are enabled. If an attacker gains access to both the user's password and their recovery codes, they get two authenticated sessions per recovery code burned instead of one, or more if they batch the parallel submissions wider, materially extending the attacker's window of access compared to what the single-use guarantee implies. This vulnerability is fixed in 4.11.5 and 5.6.5. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 3.0.0 until 3.3.52, 4.11.5, and 5.6.5, any schema can contain a file upload form field, so Filament applies Livewire's WithFileUploads trait to the Livewire component the schema is embedded in. However, some schemas, such as the panel login form, do not require file uploads, and exposing unauthenticated temporary file uploads on these components is not an acceptable risk. On these components, an unauthenticated attacker could upload arbitrary files to the application's temporary storage, which could be abused to exhaust disk space or inflate storage costs. This vulnerability is fixed in 3.3.52, 4.11.5, and 5.6.5. |
| WebOb provides objects for HTTP requests and responses. Prior to 1.8.10, the normalization of the HTTP Location header during a redirect is vulnerable to an open redirect: WebOb joins the redirect target to the request URI using Python's urljoin, and since Python 3.10 the underlying urlsplit strips ASCII tab, carriage return, and newline characters before parsing, so a redirect target containing such characters can be reinterpreted as a protocol-relative URL whose authority is an attacker-controlled host. This bypasses the CVE-2024-42353 fix that escaped a leading double slash, allowing an attacker who influences the redirect location to send users to an arbitrary external site instead of the intended one. This vulnerability is fixed in 1.8.10. |
| Tenda AC7 v15.03.06.44 contains a stack buffer overflow vulnerability in the /goform/AdvSetMacMtuWan interface via the cloneType parameter. |
| In Tenda AC7 v15.03.06.44, the wanSpeed parameter of the route /goform/AdvSetMacMtuWan has a stack buffer overflow vulnerability that can lead to remote arbitrary code execution. |
| Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Link Resolution Before File Access vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain a Use of Default Credentials vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. |
| Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, A vulnerability exists in the optional LZ4 decompression path used by MessagePack compression modes Lz4Block and Lz4BlockArray. The decoder implementation is based on a deprecated fast-decompression algorithm that does not take a source-length bound. A remote attacker can send a crafted MessagePack payload with manipulated LZ4 token/length fields to force out-of-bounds reads from the compressed input buffer. In affected environments, this can trigger an AccessViolationException during decompression, causing process termination (denial of service). Under some conditions, limited unintended memory disclosure from over-read data may also be possible before failure. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.ReadDateTime() can allocate stack memory based on an attacker-controlled MessagePack extension length. In the slow path for timestamp extension parsing, the computed tokenSize includes the extension body length from the wire and is used in a stackalloc operation before the extension length is validated as one of the valid timestamp sizes. A very small payload can claim a large timestamp extension body and cause a stack allocation large enough to trigger an uncatchable StackOverflowException, terminating the host process. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.TrySkip() recursively descends into nested arrays and maps without incrementing the reader depth or calling the configured depth checks. This bypasses MessagePackSecurity.MaximumObjectGraphDepth, the library's documented protection against deeply nested object graphs. Many generated and dynamic formatters call reader.Skip() when they encounter unknown map keys, unknown array members, ignored fields, or data that should be skipped for forward compatibility. A deeply nested value in one of these skipped positions can therefore cause unbounded recursion and an uncatchable StackOverflowException. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, the parameterless MessagePackInputFormatter() constructor uses default serializer options, which resolve to MessagePackSerializerOptions.Standard with MessagePackSecurity.TrustedData. The formatter is designed for ASP.NET Core MVC request bodies, which commonly cross an HTTP trust boundary. This insecure default can expose applications to denial-of-service attacks that MessagePackSecurity.UntrustedData is intended to mitigate, such as hash-collision attacks against dictionary-like model properties. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, when MessagePack-CSharp decompresses Lz4Block or Lz4BlockArray payloads, it reads declared uncompressed lengths from the wire and allocates output buffers based on those lengths before validating that the compressed data is valid or that the declared expansion is reasonable. A small payload can claim a very large uncompressed length and force a large allocation before LZ4 decoding begins. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| NLTK (Natural Language Toolkit) is a suite of open source Python modules, data sets, and tutorials supporting research and development in Natural Language Processing. Prior to 3.10.0-rc1, nltk.data.load() in NLTK is vulnerable to path traversal via URL-encoded path separators and traversal segments when using the nltk: URL scheme. The unsafe-path regex check is performed before url2pathname() decodes the %xx sequences (a classic decode-after-check / TOCTOU-style flaw), allowing an attacker to bypass the protection documented in NLTK's SECURITY.md and read arbitrary files from the filesystem. While literal traversal strings such as ../../../etc/passwd are correctly blocked, encoded variants such as %2fetc%2fpasswd, %2e%2e%2f..., and ..%2f..%2f slip past the regex and are subsequently decoded into a real filesystem path. This vulnerability is fixed in 3.10.0-rc1. |
| @astrojs/netlify is an adapter that allows Astro to deploy your hybrid or server rendered site to Netlify. Prior to 7.0.13, @astrojs/netlify converts Astro image.remotePatterns into Netlify Image CDN images.remote_images regular expressions with broader semantics than Astro's canonical matcher. A single wildcard hostname such as *.example.com is converted to an optional subdomain regex, so the apex host matches. A single wildcard pathname such as /ok/* is converted without end anchoring, so deeper paths match by prefix. This vulnerability is fixed in 7.0.13. |
| Astro is a web framework. Prior to 6.3.3, when a component uses a client:* directive, Astro inserts named slot content into a data-astro-template attribute without HTML escaping the slot name allowing an attacker to break out of the attribute context and inject arbitrary HTML, resulting in reflected XSS during SSR. This vulnerability is fixed in 6.3.3. |
| Astro is a web framework. Prior to 6.4.6, the spreadAttributes function in Astro's server-side rendering pipeline iterates over object keys and passes them directly to addAttribute, which interpolates the key into the HTML output without escaping. When a developer uses the spread syntax {...props} on an HTML element and the object keys come from an untrusted source (API, CMS, URL parameters), an attacker can inject arbitrary HTML attributes including event handlers like onmousemove, onclick, or break out of the attribute context entirely to inject new elements. This vulnerability is fixed in 6.4.6. |
