| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Stack-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code locally. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| Effect is a TypeScript framework that consists of several packages that work together to help build TypeScript applications. Prior to 3.22.1, Schema.TemplateLiteral schemas containing at least two Schema.String spans compile each span to the ambiguous lazy wildcard [\s\S]*?. Decoding a non-matching untrusted string causes cubic regular expression backtracking, which can block the JavaScript event loop. The issue affects Schema.decodeUnknown, Schema.decodeUnknownSync, Schema.is, and consumers such as HttpApi and @effect/rpc payload decoding. This issue is fixed in version 3.22.1. |
| Kiwi TCMS is an open source test management system. From 16.1 until 16.2, the account confirmation page’s incomplete validation of the next parameter accepts protocol-relative URLs because the version 16.1 fix for CVE-2026-54724 only requires the value to start with a slash. An unauthenticated attacker can craft a confirmation URL on a trusted Kiwi TCMS hostname that redirects a user to an external site, enabling phishing and related downstream confidentiality or integrity impacts when the user follows the link. This issue is fixed in version 16.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| VB-Audio VB-CABLE before 3.5.2.0 contains out-of-bounds read and write vulnerabilities in the vbaudio_cable64_win10.sys kernel streaming driver's KSPROPSETID_Audio MUTE, VOLUMELEVEL, and PEAKMETER2 property handlers that allow a local standard user to supply an all-channels sentinel value improperly used as a loop terminator or array index instead of being bounds-checked. Attackers can exploit the accessible low-integrity KS filter device object to write attacker-controlled values sequentially into kernel memory, corrupting kernel globals and object pointers, or read past an array boundary to leak kernel memory, resulting in local privilege escalation or denial of service via a kernel bug check. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. From 2.1.0 until 2.2.5 for tiny-secp256k1 and from 2.2.2 until 2.2.5 for @bitcoin-js/tiny-secp256k1-asmjs, the three-argument xOnlyPointAddTweakCheck path ignores the backend failure return from xOnlyPointAddTweak when a tweak produces the point at infinity. The shared X_ONLY_PUBLIC_KEY_INPUT buffer then still contains the original point, so a caller-controlled resultToCheck equal to that point can make the stale-buffer comparison return true even though no tweaked key exists. Protocols that rely on this helper to validate caller-controlled internal keys, tweaks, and comparison values can accept an invalid derived key. This issue is fixed in version 2.2.5. |
| FileCodeBox 2.2.1 through 2.8.4 contains a stored cross-site scripting vulnerability in renderMarkdownPreview, which returns unsanitized text when the marked parser throws. Unauthenticated attackers can share text with thousands of nested blockquote markers followed by HTML payloads, executing script that steals the admin token from localStorage. |
| The PocketTouch and TouchPoint POS protocol includes a `SAVECONFIG` command that appears capable of overwriting till configuration files remotely.
An attacker with network access to the POS socket service may be able to submit a crafted `SAVECONFIG` command and replace or modify terminal configuration data. |
| ICRTouch PocketTouch version 1.700 build 2025.3726 defines hard-coded default values for multiple credential fields, including a socket password and configuration and shutdown passwords. An additional email-related password field is initialized without a value. |
| An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability. |
| Kadence Security plugin for WordPress (better-wp-security) before 10.0.6.1 contains a brute-force protection bypass vulnerability that allows unauthenticated attackers to evade per-host login lockouts by exploiting IPv6 address handling in ITSEC_Lib::get_ip(), which keys failed-login counters on the full 128-bit IPv6 address rather than a /64 prefix. Attackers who control a routed IPv6 /64 can send each login attempt from a new address within that prefix, resetting the per-host counter each time to perform password spraying and username enumeration, and can similarly evade the auto_ban_admin immediate ban via address rotation. |
| Rooxis RXR-12 Wi-Fi router contains an undocumented UID-0 backdoor account (dg) with a firmware-wide default password (ivanlee) and interactive shell (/bin/ash), allowing authentication as root via SSH or local console without device-specific secrets. Firmware 20260813_c2169ea5 removes the account from the shipped root filesystem and disables root password authentication in SSH. Users can update their router can be through the local web interface. |
| Rooxis RXR-12 Wi-Fi router contains an authenticated command injection vulnerability in the LuCI white_list RPC handler (/usr/lib/lua/luci/data/white_list_plt.lua), where unsanitized user-supplied MAC addresses are concatenated into os.execute() without validation, yielding root command execution via a malformed mac parameter. Firmware 20260813_c2169ea5 fixes the vulnerability, and users can update their router through the local web interface. |