| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: link kn to its parent before the LSM init hook
After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"),
kernfs_xattr_set() and kernfs_xattr_get() compute the cache via
kernfs_root(kn) before any other check. kernfs_root(kn) walks
kn->__parent first and falls back to kn->dir.root, both of which are
NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set
in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root
is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir().
The LSM kernfs_init_security hook is invoked from inside
__kernfs_new_node(), before either field has been initialized.
selinux_kernfs_init_security() ends with kernfs_xattr_set(kn,
XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and
&((struct kernfs_root *)NULL)->xa_cache evaluates to
offsetof(struct kernfs_root, xa_cache) which faults:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
RIP: 0010:simple_xattr_set+0x27/0x8b0
Call Trace:
kernfs_xattr_set+0x63/0xb0
selinux_kernfs_init_security+0x13b/0x270
security_kernfs_init_security+0x36/0xc0
__kernfs_new_node+0x182/0x290
kernfs_new_node+0x80/0xc0
kernfs_create_dir_ns+0x2b/0xa0
cgroup_create+0x116/0x380
cgroup_mkdir+0x7c/0x1a0
Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled
distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled
parent panics the kernel.
The LSM hook's contract is that the kn_dir argument is the parent of
the new kn, so kn->__parent should already point at kn_dir when the
hook runs. Move kernfs_get(parent) and rcu_assign_pointer of
kn->__parent from kernfs_new_node() into __kernfs_new_node() right
before the security hook, and unwind the parent reference on the
err_out4 path. kernfs_root(kn) then takes its parent branch during
the hook and returns parent->dir.root, which is the correct root.
This also closes the same-shape latent bug in kernfs_xattr_get() (which
today is hidden only by kernfs_iattrs_noalloc() returning NULL on a
fresh kn). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix OOB read during CQ MR registration
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR aging push to queue error flow
Aging pools with pinned handles requires moving handles from the
active queue to a non-empty inactive queue that might fail on new page
allocation, we are currently not handling the fault and leaking any mkey
that fails the push.
Fix by Introducing push_queue_to_queue_locked() that fills the
destination's partial tail page from the source and then splices the
remaining source pages onto the destination, performing no allocation.
Replace the per-handle move loop in age_pinned_pool() and the
open-coded splice in pool_aging_work() with calls to the helper.
As the helper cannot fail under memory pressure, removing a class of
GFP_ATOMIC allocations under the pool lock and simplifying the error
flow. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not
belong to the same superblock as the original file. Currently, this
validation is performed inside ext4_move_extents() by
mext_check_validity(), but only after lock_two_nondirectories() has
already acquired the inode locks. When the donor fd refers to a file
on a different filesystem (e.g., overlayfs), this late validation
creates a circular lock dependency:
CPU0 (overlayfs write) CPU1 (ext4 ioctl)
---- ----
inode_lock(ovl_inode)
mnt_want_write_file(filp)
sb_start_write(ext4_sb) [sb_writers]
backing_file_write_iter()
vfs_iter_write(real_file)
file_start_write(real_file)
sb_start_write(ext4_sb) [blocked by freeze]
lock_two_nondirectories()
inode_lock(ovl_inode) [blocked]
With a concurrent freeze operation holding sb_writers write side, this
forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits
for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock.
Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files,
it fundamentally requires both files to reside on the same ext4
filesystem. Moving the superblock check before any lock acquisition
is both semantically correct and eliminates the circular dependency
by ensuring that cross-filesystem donor fds are rejected before
sb_writers or inode locks are taken. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: sm501fb: Fix buffer errors in OF binding code
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: unregister PM notifier on watchdog unregister
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_task_from_vpid()
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| A vulnerability was identified in LB-LINK X-PRO 1.0.22-20231206. The impacted element is an unknown function of the file /etc/shadow. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is regarded as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0. The affected element is an unknown function of the file /edit_teacher.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: require a ref for locking_state debugfs open
debug_lockres_open() copies inode->i_private into struct debug_lockres and
debug_lockres_release() later drops that pointer with dlm_put(). That
only works if open successfully pins the struct dlm_ctxt.
Today open calls dlm_grab(dlm) but ignores its return value. Once the
last domain unregister has removed the context from dlm_domains,
dlm_grab() returns NULL, yet open still stores the raw pointer and returns
success. The later release path is outside the debugfs removal barrier,
so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context.
KASAN reports this as a slab-use-after-free in dlm_put() called from
debug_lockres_release().
Fail the open when dlm_grab() cannot acquire the reference and unwind the
seq_file private state before returning. That keeps locking_state from
handing out a file descriptor whose release path does not own the
dlm_ctxt.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state debugfs open: last domain unregister:
1. debug_lockres_open() reads 1. dlm_unregister_domain() calls
inode->i_private. dlm_complete_dlm_shutdown().
2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from
dlm_grab(dlm) and gets NULL. dlm_domains.
3. open still stores the raw dlm 3. final teardown reaches
pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it.
returns success.
4. debug_lockres_release() later
calls dlm_put(dl->dl_ctxt).
Validation reproduced this kernel report:
KASAN slab-use-after-free in dlm_put+0x82/0x200
RIP: 0033:0x7f4d349bc9e0
The buggy address belongs to the object at ffff888103a3c000 which belongs
to the cache kmalloc-2k of size 2048
The buggy address is located 816 bytes inside of freed 2048-byte region
[ffff888103a3c000, ffff888103a3c800)
Write of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
dlm_put+0x82/0x200 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
dlm_put+0x9/0x200 (?:?)
debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
full_proxy_release+0x67/0x90 (?:?)
__fput+0x1df/0x4b0 (?:?)
do_raw_spin_lock+0x10f/0x1b0 (?:?)
fput_close_sync+0xd2/0x170 (?:?)
__x64_sys_close+0x55/0x90 (?:?)
do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87)
irqentry_exit+0xac/0x6e0 (?:?)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Freed by task stack:
kasan_save_stack+0x33/0x60 (?:?)
kasan_save_track+0x14/0x30 (?:?)
kasan_save_free_info+0x3b/0x60 (?:?)
__kasan_slab_free+0x5f/0x80 (?:?)
kfree+0x30f/0x580 (?:?)
dlm_put+0x1ce/0x200 (?:?)
dlm_unregister_domain+0xf6/0xb30 (?:?)
o2cb_cluster_disconnect+0x6b/0x90 (?:?)
ocfs2_cluster_disconnect+0x41/0x70 (?:?)
ocfs2_dlm_shutdown+0x1c4/0x220 (?:?)
ocfs2_dismount_volume+0x38a/0x550 (?:?)
generic_shutdown_super+0xc3/0x220 (?:?)
kill_block_super+0x29/0x60 (?:?)
deactivate_locked_super+0x66/0xe0 (?:?)
cleanup_mnt+0x13d/0x210 (?:?)
task_work_run+0xfa/0x170 (?:?)
exit_to_user_mode_loop+0xd6/0x430 (?:?)
do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix fast commit wait/wake bit mapping on 64-bit
On 64-bit, ext4 dynamic inode states live in the upper half of i_flags,
and ext4_test_inode_state() applies the corresponding +32 offset.
The fast-commit wait and wake paths open-coded the wait key with the raw
EXT4_STATE_* value. Add small helpers for the state wait word and bit,
and use them for the FC_COMMITTING and FC_FLUSHING_DATA waits so the wait
key follows the same mapping as the state helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path
In raid1_write_request(), each per-mirror loop iteration begins by
incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a
badblock within the requested range, the code jumps to err_handle
without dropping the reference taken for the current mirror.
err_handle's cleanup loop will only decrements for k < i and
r1_bio->bios[k] is non-NULL. The current slot is therefore skipped,
leaving its nr_pending reference leaked permanently. The reference
prevents the rdev from ever being removed, since raid1_remove_conf()
refuses to remove an rdev with nr_pending > 0.
Fix this by calling rdev_dec_pending() before jumping to err_handle. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix page fragment cache leak in error path
In nvmet_tcp_alloc_queue(), when a connection is closed during the
allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN),
the error handling jumps to out_destroy_sq and then to out_ida_remove
without draining the page fragment cache.
Although nvmet_tcp_free_cmd() is called in some error paths to release
individual page fragments, the underlying page cache reference held by
queue->pf_cache is never released. The first allocation using pf_cache
is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens
after ida_alloc() returns successfully. This results in a page leak each
time a connection fails during allocation, which could lead to memory
exhaustion over time if connections are repeatedly opened and closed.
Fix this by calling page_frag_cache_drain() before freeing the queue
structure in the out_ida_remove label. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: limit target bio polling to one shot
dm_poll_bio() is the ->poll_bio() callback for a stacked dm device.
The caller only knows about the dm queue, so it may decide to do a
spinning poll if it thinks a single queue is being polled. Passing those
flags unchanged to the mapped clone lets blk_mq_poll() spin on a target
queue from inside dm_poll_bio().
With io_uring IOPOLL on a dm-stripe target this can keep a task in
dm_poll_bio() -> bio_poll() -> blk_mq_poll()
long enough to trigger an RCU CPU stall, before io_uring gets back to
io_iopoll_check() and its need_resched() check.
Keep dm's ->poll_bio() bounded by forcing one-shot polling for target
bios. The caller can invoke dm_poll_bio() again if it wants to keep
polling, and it also gets a chance to reap completions or reschedule
between passes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/syncobj: Fix memory leak in drm_syncobj_find_fence()
Commit 18226ba52159 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Reported by: Sam Spencer <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
