| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Sign-extend VA for range-based TLBI invalidation
When the decode_range_tlbi() helper was moved to be used for S1 TLBIs,
the required sign extension was omitted. Add it.
As a result, special care must be taken to not overflow PA bits when
this is used for S2 invalidation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Make VNCR invalidation participate in MMU invalidation retry
A VNCR TLB invalidation can occur on one vcpu while another vcpu is
faulting in this same page. Without correctly handling this, we can
end up with the following scenario:
- vcpu A walks the PTs to translate VNCR
- before vcpu A is able to grab the MMU lock to insert the TLB,
vcpu B updates the S1 PTs with an invalid entry, and issues
a TLBI S1E2 for this VA
- vcpu A inserts the TLB for something that is now invalid
This isn't a new problem, and we manage S2 by having the MMU notifier
to bump up mmu_invalidate_seq on invalidation so that the fault can be
replayed.
We can perform something similar here, and extend invalidate_vncr_va() to
update the same counter, clearly indicating that the context has
changed under our feet. This is safe as the invalidation always happen
while holding the MMU lock for write, and that we sample the sequence
number before walking S1. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly handle end of VA space TLBI invalidation
Our TLB invalidation by VA code is based on comparing two ranges,
one defined by the TLB, and one defined by the TLBI instruction.
Each range is defined by a start and a size. However, the way the
comparison is done doesn't account for address rollover, as it
compares an address with (base + size). This works nicely until
this expression represent the last page/block in the TTBR1 VA space,
as the result is a big fat 0. And a failed TLB invalidation.
Rewrite the comparison in a way that is immune to the address
rollover (making the end address inclusive instead of exclusive),
and move this into a common helper that is used by both VA and IPA
invalidations, as suggested by Hyunwoo Kim (although the IPA version
didn't suffer from this particular problem, obviously). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Free guest debug data on vcpu destroy
kvm_s390_clear_bp_data() is only called from
kvm_arch_vcpu_ioctl_set_guest_debug(), i.e. when user space changes or
disables debugging. A vCPU that is destroyed while hardware breakpoints
are still armed - the normal case when the VMM just exits or crashes -
leaks hw_bp_info, hw_wp_info and all old_data buffers, since generic KVM
frees the vCPU right after kvm_arch_vcpu_destroy().
That is bounded by MAX_BP_COUNT entries, so roughly 8 KiB per vCPU, but
it is unbounded over VM lifetimes. The allocations are
GFP_KERNEL_ACCOUNT, so the charge also outlives the exiting process and
pins dying memcgs.
Fix by clearing the debug data on vCPU destruction. Calling it
unconditionally is fine: struct kvm_vcpu is zero allocated, so for a vCPU
that never enabled debugging the counters are 0 and the pointers NULL. |
| Apache NiFi 1.5.0 through 2.11.0 provide REST API methods that replace the entire contents of a Process Group using a client-supplied flow definition, covering Process Group flow replacement together with versioned flow update and rebase operations. Framework authorization for these methods was limited to read and write privileges on the Process Group itself, unlike the corresponding asynchronous update request methods, which also authorize the components encapsulated in the Process Group along with referenced Controller Services, Parameter Contexts, and Parameter Providers. As a result of the missing authorization, an authenticated user with write access to a Process Group could supply a flow definition that modifies or removes components in descendant Process Groups protected by more restrictive access policies, and could bind components to Controller Services and Parameter Contexts without authorization for those referenced components. Existing verification checks limited the impact to stopped components, and the issue applies only to deployments that use component-level authorization policies, because the framework enforces write permissions as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which applies consistent reference resolution and component authorization across Process Group replacement and versioned flow update methods |
| Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers. |
| Tanium addressed a SQL injection vulnerability in Threat Response. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix old_data leak in guest debug error path
__import_wp_info() allocates a per-watchpoint old_data buffer to back up
the original guest memory contents. If a later watchpoint of the same
KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data()
jumps to the error label, which frees the wp_info array but not the
old_data buffers of the entries that were imported successfully. Up to
MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed
request, and the request can be repeated.
Create error handling for cleaning up all created old_data memory
areas. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory leak in guest debug handling
bp_data is freed only for the error case by kfree(bp_data).
Every successful KVM_SET_GUEST_DEBUG will leak bp_data. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-94: Improper Control of Generation of Code ('Code Injection') vulnerability in the Modbus CSV import workflow of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary Lua code on the device via a crafted imported file. |
| Nozomi Networks Labs identified a CWE-306: Missing Authentication for Critical Function vulnerability in the edgserver management protocol of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to invoke critical device-management functions, including network reconfiguration, reboot, reset, and firmware upgrade, by sending crafted requests to TCP port 5058. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| The Newsletter WordPress plugin before 9.3.8 does not generate its email tracking signing key with sufficient entropy and signs its tracking links with an unkeyed hash, allowing an unauthenticated attacker who recovers that key offline to forge tracking links, obtain any subscriber's session token, and read and modify that subscriber's stored personal data. |
| The NeuVector JWT verifier accepts noncanonical Base64URL encodings of the same RSA signature field. An attacker holding a valid JWT that has not expired, but was logged out of NeuVector, can continue using the non-expired token with equivalent spelling of the RSA signature field until the token validity expires. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: avoid deleting unlinked ASC entry on link error
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: quiesce overflow recovery before freeing streams
The VIP overflow recovery worker is armed from the hardirq handler when a
FIFO overflow is detected, and the list-complete path looks the stream up
through the VPDMA list private pointer. Both keep touching stream, port
and device state; the recovery worker also resets the parser and VPDMA,
repopulates the descriptor list, and re-enables the per-list IRQs.
vip_stop_streaming() masks and clears the per-list IRQs, but it neither
synchronizes the hardirq handler nor disables recovery_work. An overflow
IRQ that has already queued recovery_work, or a list-complete IRQ in
flight when the stream is torn down, can therefore still dereference the
stream after its resources are released: the descriptor list is freed by
vip_release_stream() on file release, and the stream itself by
free_stream() on unbind/remove.
Drain the recovery worker and the IRQ handler at both teardown points
through a shared vip_quiesce_stream() helper, before any stream-owned
resource is released. disable_work_sync() cancels pending recovery_work,
drains a running instance, and raises its disable depth, so a subsequent
schedule_work() issued by a racing IRQ handler is rejected at the
workqueue scheduler: recovery_work cannot be requeued after
disable_work_sync() takes effect. The worker may still re-enable the
per-list IRQs before disable_work_sync() returns; disable_irqs() then
masks those sources and synchronize_irq() waits for any in-flight handler
that still dereferences stream state. In vip_stop_streaming() the helper
runs before the parser is stopped, since a worker drained by
disable_work_sync() may re-enable the parser before exiting and would
otherwise undo the stop. recovery_work is created disabled and enabled in
vip_start_streaming() before IRQs, pairing the enable with the teardown
disable across the streaming lifecycle.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
