| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Information Exposure issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. User credentials are sent to the web server using the HTTP GET method, which may result in the credentials being logged. This could make user credentials available for unauthorized retrieval. |
| A vulnerability has been identified in Primary Setup Tool (PST) (All versions < V4.2 HF1), SIMATIC Automation Tool (All versions < V3.0), SIMATIC NET PC-Software (All versions < V14 SP1), SIMATIC PCS 7 V8.1 (All versions), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1), SIMATIC STEP 7 (TIA Portal) V13 (All versions < V13 SP2), SIMATIC STEP 7 (TIA Portal) V14 (All versions < V14 SP1), SIMATIC STEP 7 V5.X (All versions < V5.6), SIMATIC WinAC RTX 2010 SP2 (All versions), SIMATIC WinAC RTX F 2010 SP2 (All versions), SIMATIC WinCC (TIA Portal) V13 (All versions < V13 SP2), SIMATIC WinCC (TIA Portal) V14 (All versions < V14 SP1), SIMATIC WinCC V7.2 and prior (All versions), SIMATIC WinCC V7.3 (All versions < V7.3 Update 15), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Upd1), SIMATIC WinCC flexible 2008 (All versions < flexible 2008 SP5), SINAUT ST7CC (All versions installed in conjunction with SIMATIC WinCC < V7.3 Update 15), SINEMA Server (All versions < V14), SINUMERIK 808D Programming Tool (All versions < V4.7 SP4 HF2), SMART PC Access (All versions < V2.3), STEP 7 - Micro/WIN SMART (All versions < V2.3), Security Configuration Tool (SCT) (All versions < V5.0). Specially crafted PROFINET DCP broadcast packets sent to the affected products on a local Ethernet segment (Layer 2) could cause a Denial-of-Service condition of some services. The services require manual restart to recover. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783. |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. |
| Cisco IOS 12.0 through 15.6, Adaptive Security Appliance (ASA) Software 7.0.1 through 9.7.1.2, NX-OS 4.0 through 12.0, and IOS XE 3.6 through 3.18 are affected by a vulnerability involving the Open Shortest Path First (OSPF) Routing Protocol Link State Advertisement (LSA) database. This vulnerability could allow an unauthenticated, remote attacker to take full control of the OSPF Autonomous System (AS) domain routing table, allowing the attacker to intercept or black-hole traffic. The attacker could exploit this vulnerability by injecting crafted OSPF packets. Successful exploitation could cause the targeted router to flush its routing table and propagate the crafted OSPF LSA type 1 update throughout the OSPF AS domain. To exploit this vulnerability, an attacker must accurately determine certain parameters within the LSA database on the target router. This vulnerability can only be triggered by sending crafted unicast or multicast OSPF LSA type 1 packets. No other LSA type packets can trigger this vulnerability. OSPFv3 is not affected by this vulnerability. Fabric Shortest Path First (FSPF) protocol is not affected by this vulnerability. Cisco Bug IDs: CSCva74756, CSCve47393, CSCve47401. |
| A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131. |
| A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457. |
| Google Chrome prior to 57.0.2987.100 incorrectly handled back-forward navigation, which allowed a remote attacker to display incorrect information for a site via a crafted HTML page. |
| A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| A vulnerability in the pluggable authentication module (PAM) of Juniper Networks Junos OS may allow an unauthenticated network based attacker to potentially execute arbitrary code or crash daemons such as telnetd or sshd that make use of PAM. Affected Juniper Networks Junos OS releases are: 14.1 from 14.1R5 prior to 14.1R8-S4, 14.1R9; 14.1X53 prior to 14.1X53-D50 on EX and QFX series; 14.2 from 14.2R3 prior to 14.2R7-S8, 14.2R8; No other Junos OS releases are affected by this issue. No other Juniper Networks products are affected by this issue. |
| On all vSRX and SRX Series devices, when the DHCP or DHCP relay is configured, specially crafted packet might cause the flowd process to crash, halting or interrupting traffic from flowing through the device(s). Repeated crashes of the flowd process may constitute an extended denial of service condition for the device(s). If the device is configured in high-availability, the RG1+ (data-plane) will fail-over to the secondary node. If the device is configured in stand-alone, there will be temporary traffic interruption until the flowd process is restored automatically. Sustained crafted packets may cause the secondary failover node to fail back, or fail completely, potentially halting flowd on both nodes of the cluster or causing flip-flop failovers to occur. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D67 on vSRX or SRX Series; 12.3X48 prior to 12.3X48-D50 on vSRX or SRX Series; 15.1X49 prior to 15.1X49-D91, 15.1X49-D100 on vSRX or SRX Series. |
| An issue was discovered in certain Apple products. iOS before 10.2 is affected. The issue involves the "Image Capture" component, which allows attackers to execute arbitrary code via a crafted USB HID device. |
| An issue was discovered in certain Apple products. iOS before 10.1 is affected. macOS before 10.12.1 is affected. tvOS before 10.0.1 is affected. watchOS before 3.1 is affected. The issue involves the "Kernel" component. It allows local users to execute arbitrary code in a privileged context or cause a denial of service (MIG code mishandling and system crash) via unspecified vectors. |
| An issue was discovered in certain Apple products. iOS before 10.1 is affected. tvOS before 10.0.1 is affected. watchOS before 3.1 is affected. The issue involves the "Sandbox Profiles" component, which allows attackers to read photo-directory metadata via a crafted app. |
| An issue was discovered in certain Apple products. macOS before 10.12.1 is affected. The issue involves the "ntfs" component, which misparses disk images and allows attackers to cause a denial of service via a crafted app. |
| An issue was discovered in certain Apple products. iOS before 10.1 is affected. macOS before 10.12.1 is affected. tvOS before 10.0.1 is affected. watchOS before 3.1 is affected. The issue involves the "FontParser" component. It allows remote attackers to obtain sensitive information or cause a denial of service (out-of-bounds read and application crash) via a crafted font. |
| In all Android releases from CAF using the Linux kernel, a vulnerability exists in the parsing of a DRM provisioning command. |
| Samsung devices with Android KK(4.4), L(5.0/5.1), or M(6.0) allow attackers to cause a denial of service (system crash) via a crafted system call to TvoutService_C. |
| The dbclient and server in Dropbear SSH before 2016.74, when compiled with DEBUG_TRACE, allows local users to read process memory via the -v argument, related to a failed remote ident. |
