| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: call disconnect callback before deleting conn
In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.
ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.
ISO:
==========================================================
iso_sock_connect:880: sk 00000000eabd6557
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073
hci_dev_put:1487: hci0 orig refcnt 17
__iso_chan_add:214: conn 00000000b6251073
iso_sock_clear_timer:117: sock 00000000eabd6557 state 3
...
hci_rx_work:4085: hci0 Event packet
hci_event_packet:7601: hci0: event 0x0f
hci_cmd_status_evt:4346: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3107: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560
hci_conn_unlink:1102: hci0: hcon 000000001696f1fd
hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2
hci_chan_list_flush:2780: hcon 000000001696f1fd
hci_dev_put:1487: hci0 orig refcnt 21
hci_dev_put:1487: hci0 orig refcnt 20
hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c
... <no iso_* activity on sk/conn> ...
iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557
BUG: kernel NULL pointer dereference, address: 0000000000000668
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth
==========================================================
L2CAP:
==================================================================
hci_cmd_status_evt:4359: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3085: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585
hci_conn_unlink:1102: hci0: hcon ffff88800c999000
hci_chan_list_flush:2780: hcon ffff88800c999000
hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280
...
BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]
Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175
CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xf8/0x180
? hci_send_acl+0x2d/0x540 [bluetooth]
kasan_report+0xa8/0xe0
? hci_send_acl+0x2d/0x540 [bluetooth]
hci_send_acl+0x2d/0x540 [bluetooth]
? __pfx___lock_acquire+0x10/0x10
l2cap_chan_send+0x1fd/0x1300 [bluetooth]
? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth]
? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth]
? lock_release+0x1d5/0x3c0
? mark_held_locks+0x1a/0x90
l2cap_sock_sendmsg+0x100/0x170 [bluetooth]
sock_write_iter+0x275/0x280
? __pfx_sock_write_iter+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
do_iter_readv_writev+0x176/0x220
? __pfx_do_iter_readv_writev+0x10/0x10
? find_held_lock+0x83/0xa0
? selinux_file_permission+0x13e/0x210
do_iter_write+0xda/0x340
vfs_writev+0x1b4/0x400
? __pfx_vfs_writev+0x10/0x10
? __seccomp_filter+0x112/0x750
? populate_seccomp_data+0x182/0x220
? __fget_light+0xdf/0x100
? do_writev+0x19d/0x210
do_writev+0x19d/0x210
? __pfx_do_writev+0x10/0x10
? mark_held_locks+0x1a/0x90
do_syscall_64+0x60/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
? do_syscall_64+0x6c/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7ff45cb23e64
Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: fix null-ptr-deref in handshake_nl_done_doit()
We should not call trace_handshake_cmd_done_err() if socket lookup has failed.
Also we should call trace_handshake_cmd_done_err() before releasing the file,
otherwise dereferencing sock->sk can return garbage.
This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")
Unable to handle kernel paging request at virtual address dfff800000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000003] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
lr : handshake_nl_done_doit+0x180/0x9c8
sp : ffff800096e37180
x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000
x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8
x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000
x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001
x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003
x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078
x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000
Call trace:
handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]
genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x56c/0x840 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908) |
| In the Linux kernel, the following vulnerability has been resolved:
tun: Fix memory leak for detached NAPI queue.
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer
smatch error:
sound/pci/ac97/ac97_codec.c:2354 snd_ac97_mixer() error:
we previously assumed 'rac97' could be null (see line 2072)
remove redundant assignment, return error if rac97 is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix system suspend without fbdev being initialized
If fbdev is not initialized for some reason - in practice on platforms
without display - suspending fbdev should be skipped during system
suspend, fix this up. While at it add an assert that suspending fbdev
only happens with the display present.
This fixes the following:
[ 91.227923] PM: suspend entry (s2idle)
[ 91.254598] Filesystems sync: 0.025 seconds
[ 91.270518] Freezing user space processes
[ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds)
[ 91.272686] OOM killer disabled.
[ 91.272872] Freezing remaining freezable tasks
[ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8
[ 91.659981] #PF: supervisor write access in kernel mode
[ 91.660252] #PF: error_code(0x0002) - not-present page
[ 91.660511] PGD 0 P4D 0
[ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54
[ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown
[ 91.661680] RIP: 0010:mutex_lock+0x19/0x30
[ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40
[ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246
[ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000
[ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8
[ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0
[ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20
[ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000
[ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0
[ 91.665988] PKRU: 55555554
[ 91.666131] Call Trace:
[ 91.666265] <TASK>
[ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915]
[ 91.666738] i915_drm_suspend+0xb9/0x100 [i915]
[ 91.667029] pci_pm_suspend+0x78/0x170
[ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10
[ 91.667461] dpm_run_callback+0x47/0x150
[ 91.667673] __device_suspend+0x10a/0x4e0
[ 91.667880] dpm_suspend+0x134/0x270
[ 91.668069] dpm_suspend_start+0x79/0x80
[ 91.668272] suspend_devices_and_enter+0x11b/0x890
[ 91.668526] pm_suspend.cold+0x270/0x2fc
[ 91.668737] state_store+0x46/0x90
[ 91.668916] kernfs_fop_write_iter+0x11b/0x200
[ 91.669153] vfs_write+0x1e1/0x3a0
[ 91.669336] ksys_write+0x53/0xd0
[ 91.669510] do_syscall_64+0x58/0xc0
[ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40
[ 91.670524] ? do_syscall_64+0x67/0xc0
[ 91.670717] ? __irq_exit_rcu+0x3d/0x140
[ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 91.671202] RIP: 0033:0x7f28ffd14284
v2: CC stable. (Jani)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
(cherry picked from commit 9542d708409a41449e99c9a464deb5e062c4bee2) |
| The Motors – Car Dealership & Classified Listings Plugin plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation when deleting profile pictures in all versions up to, and including, 1.4.89. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to SQL Injection in all versions up to, and including, 6.0.6.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator access or higher, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. An unauthenticated attacker could utilize an injected Cross-Site Scripting via user-agent on form submission to leverage this to achieve Reflected Cross-Site Scripting. |
| Dell PowerProtect Data Domain BoostFS for Linux Ubuntu systems of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Incorrect Privilege Assignment vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix out-of-bounds when setting channels on remove
If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
Reproducer:
[root@host ~]# cat repro.sh
#!/bin/bash
pf_dbsf="0000:41:00.0"
vf0_dbsf="0000:41:02.0"
g_pids=()
function do_set_numvf()
{
echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
}
function do_set_channel()
{
local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
[ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
ifconfig $nic 192.168.18.5 netmask 255.255.255.0
ifconfig $nic up
ethtool -L $nic combined 1
ethtool -L $nic combined 4
sleep $((RANDOM%3))
}
function on_exit()
{
local pid
for pid in "${g_pids[@]}"; do
kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
done
g_pids=()
}
trap "on_exit; exit" EXIT
while :; do do_set_numvf ; done &
g_pids+=($!)
while :; do do_set_channel ; done &
g_pids+=($!)
wait
Result:
[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851] dump_stack+0x71/0xab
[ 3510.400860] print_address_description+0x6b/0x290
[ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868] kasan_report+0x14a/0x2b0
[ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891] ? wait_woken+0x1d0/0x1d0
[ 3510.400895] ? notifier_call_chain+0xc1/0x130
[ 3510.400903] pci_device_remove+0xa8/0x1f0
[ 3510.400910] device_release_driver_internal+0x1c6/0x460
[ 3510.400916] pci_stop_bus_device+0x101/0x150
[ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924] pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929] ? pci_get_subsys+0x90/0x90
[ 3510.400932] sriov_disable+0xed/0x3e0
[ 3510.400936] ? bus_find_device+0x12d/0x1a0
[ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968] ? pci_get_device+0x7c/0x90
[ 3510.400970] ? pci_get_subsys+0x90/0x90
[ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001] sriov_numvfs_store+0x214/0x290
[ 3510.401005] ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011] ? __check_object_size+0x15a/0x350
[ 3510.401018] kernfs_fop_write+0x280/0x3f0
[ 3510.401022] vfs_write+0x145/0x440
[ 3510.401025] ksys_write+0xab/0x160
[ 3510.401028] ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031] ? fput_many+0x1a/0x120
[ 3510.401032] ? filp_close+0xf0/0x130
[ 3510.401038] do_syscall_64+0xa0/0x370
[ 3510.401041] ? page_fault+0x8/0x30
[ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: don't access released socket during error recovery
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel
stack overflow as shown below. This issue can be reproduced by enabling
CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=",
and then giving the following commands at the shell prompt:
# cd /sys/kernel/tracing/
# echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events
# echo 1 > events/kprobes/enable
This commit therefore adds __rcu_irq_enter_check_tick() to the kprobes
blacklist using NOKPROBE_SYMBOL().
Insufficient stack space to handle exception!
ESR: 0x00000000f2000004 -- BRK (AArch64)
FAR: 0x0000ffffccf3e510
Task stack: [0xffff80000ad30000..0xffff80000ad38000]
IRQ stack: [0xffff800008050000..0xffff800008058000]
Overflow stack: [0xffff089c36f9f310..0xffff089c36fa0310]
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
pstate: 400003c5 (nZcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __rcu_irq_enter_check_tick+0x0/0x1b8
lr : ct_nmi_enter+0x11c/0x138
sp : ffff80000ad30080
x29: ffff80000ad30080 x28: ffff089c82e20000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff089c02a8d100 x24: 0000000000000000
x23: 00000000400003c5 x22: 0000ffffccf3e510 x21: ffff089c36fae148
x20: ffff80000ad30120 x19: ffffa8da8fcce148 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffa8da8e44ea6c
x14: ffffa8da8e44e968 x13: ffffa8da8e03136c x12: 1fffe113804d6809
x11: ffff6113804d6809 x10: 0000000000000a60 x9 : dfff800000000000
x8 : ffff089c026b404f x7 : 00009eec7fb297f7 x6 : 0000000000000001
x5 : ffff80000ad30120 x4 : dfff800000000000 x3 : ffffa8da8e3016f4
x2 : 0000000000000003 x1 : 0000000000000000 x0 : 0000000000000000
Kernel panic - not syncing: kernel stack overflow
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xf8/0x108
show_stack+0x20/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
panic+0x214/0x404
add_taint+0x0/0xf8
panic_bad_stack+0x144/0x160
handle_bad_stack+0x38/0x58
__bad_stack+0x78/0x7c
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
[...]
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
el1_interrupt+0x28/0x60
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
__ftrace_set_clr_event_nolock+0x98/0x198
__ftrace_set_clr_event+0x58/0x80
system_enable_write+0x144/0x178
vfs_write+0x174/0x738
ksys_write+0xd0/0x188
__arm64_sys_write+0x4c/0x60
invoke_syscall+0x64/0x180
el0_svc_common.constprop.0+0x84/0x160
do_el0_svc+0x48/0xe8
el0_svc+0x34/0xd0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x190/0x194
SMP: stopping secondary CPUs
Kernel Offset: 0x28da86000000 from 0xffff800008000000
PHYS_OFFSET: 0xfffff76600000000
CPU features: 0x00000,01a00100,0000421b
Memory Limit: none |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/perf: add sentinel to xehp_oa_b_counters
Arrays passed to reg_in_range_table should end with empty record.
The patch solves KASAN detected bug with signature:
BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
Read of size 4 at addr ffffffffa1555d90 by task perf/1518
CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1
Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023
Call Trace:
<TASK>
...
xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
(cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Add validation before accessing cgx and lmac
with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.
This patch fixes the issue by adding proper checks.
[ 23.219150] pc : cgx_lmac_read+0x38/0x70
[ 23.219154] lr : rvu_program_channels+0x3f0/0x498
[ 23.223852] sp : ffff000100d6fc80
[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix deadloop issue on reading trace_pipe
Soft lockup occurs when reading file 'trace_pipe':
watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
[...]
RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
[...]
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__find_next_entry+0x1a8/0x4b0
? peek_next_entry+0x250/0x250
? down_write+0xa5/0x120
? down_write_killable+0x130/0x130
trace_find_next_entry_inc+0x3b/0x1d0
tracing_read_pipe+0x423/0xae0
? tracing_splice_read_pipe+0xcb0/0xcb0
vfs_read+0x16b/0x490
ksys_read+0x105/0x210
? __ia32_sys_pwrite64+0x200/0x200
? switch_fpu_return+0x108/0x220
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
hif_dev->remain_skb is allocated and used exclusively in
ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is
processed and subsequently freed (in error paths) only during the next
call of ath9k_hif_usb_rx_stream().
So, if the urbs are deallocated between those two calls due to the device
deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream()
is not called next time and the allocated remain_skb is leaked. Our local
Syzkaller instance was able to trigger that.
remain_skb makes sense when receiving two consecutive urbs which are
logically linked together, i.e. a specific data field from the first skb
indicates a cached skb to be allocated, memcpy'd with some data and
subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs
deallocation supposedly makes that link irrelevant so we need to free the
cached skb in those cases.
Fix the leak by introducing a function to explicitly free remain_skb (if
it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL
when it has not been allocated at all (hif_dev struct is kzalloced) or
when it has been processed in next call to ath9k_hif_usb_rx_stream().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| A security vulnerability has been detected in D-Link DIR-513 A1FW110. Affected is an unknown function of the file /goform/formWPS. Such manipulation of the argument webpage leads to buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| an Improper Access Control vulnerability has been found in EmbedAI 2.1 and below. This vulnerability allows an authenticated attacker change his subscription plan without paying by making a POST request changing the parameters of the "/demos/embedai/pmt_cash_on_delivery/pay" endpoint. |
| The mcp-database-server (MCP Server) 1.1.0 and earlier, as distributed via the npm package @executeautomation/database-server, fails to implement adequate security controls to properly enforce a "read-only" mode. This vulnerability affects only the npm distribution; other distributions are not impacted. As a result, the server is susceptible to abuse and attacks on affected database systems such as PostgreSQL, and potentially others that expose elevated functionalities. These attacks may lead to denial of service and other unexpected behaviors. |
