| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix type confusion in bond_setup_by_slave()
kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9
When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:
bond_dev->header_ops = slave_dev->header_ops;
This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.
Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.
The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.
The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:
ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1 |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
team: fix header_ops type confusion with non-Ethernet ports
Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.
For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.
The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.
Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.
Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: prevent potential infinite loop in bond_header_parse()
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
But it's wrong for the much subtler "next to last" case when somebody
*else* may also be dropping their reference and free the ep while we're
still using the mutex.
Note that this is true even if that other user is also using the same ep
mutex: mutexes, unlike spinlocks, can not be used for object ownership,
even if they guarantee mutual exclusion.
A mutex "unlock" operation is not atomic, and as one user is still
accessing the mutex as part of unlocking it, another user can come in
and get the now released mutex and free the data structure while the
first user is still cleaning up.
See our mutex documentation in Documentation/locking/mutex-design.rst,
in particular the section [1] about semantics:
"mutex_unlock() may access the mutex structure even after it has
internally released the lock already - so it's not safe for
another context to acquire the mutex and assume that the
mutex_unlock() context is not using the structure anymore"
So if we drop our ep ref before the mutex unlock, but we weren't the
last one, we may then unlock the mutex, another user comes in, drops
_their_ reference and releases the 'ep' as it now has no users - all
while the mutex_unlock() is still accessing it.
Fix this by simply moving the ep refcount dropping to outside the mutex:
the refcount itself is atomic, and doesn't need mutex protection (that's
the whole _point_ of refcounts: unlike mutexes, they are inherently
about object lifetimes). |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Add alignment check for event ring read pointer
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in elixir-ecto postgrex ('Elixir.Postgrex.Notifications' module) allows SQL Injection.
The channel argument passed to 'Elixir.Postgrex.Notifications':listen/3 and 'Elixir.Postgrex.Notifications':unlisten/3 is interpolated directly into LISTEN "..." / UNLISTEN "..." SQL statements without escaping the " character. An attacker who can influence the channel name can inject a " to break out of the quoted identifier and append arbitrary SQL. Because the notifications connection uses the PostgreSQL simple query protocol, multi-statement payloads are accepted, allowing DDL and DML commands to be chained (e.g. ; DROP TABLE ...; --). The same unsanitized interpolation also occurs in handle_connect/1 when replaying LISTEN commands after a reconnect.
This vulnerability is associated with program file lib/postgrex/notifications.ex and program routines 'Elixir.Postgrex.Notifications':listen/3, 'Elixir.Postgrex.Notifications':unlisten/3, 'Elixir.Postgrex.Notifications':handle_connect/1.
This issue affects postgrex: from 0.16.0 before 0.22.2. |
| Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk.
The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service.
A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited.
This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to erts from 6.0 before 17.0.2, 16.4.0.2 and 15.2.7.9. |
| Improper Neutralization of CRLF Sequences vulnerability in benoitc hackney allows HTTP Request Splitting. hackney does not percent-encode carriage return (\r) or line feed (\n) characters in the URL query component before constructing the HTTP/1.1 request target. Characters outside the grammar defined in RFC 3986 Section 3.4 must be percent-encoded, but hackney_url:make_url/3 passes the query binary directly without validation or escaping. An attacker who can control all or part of a URL passed to hackney can inject raw CRLF sequences into the query string, which are then sent as HTTP line breaks in the request target. This enables injection of arbitrary HTTP headers or splitting of the HTTP request.
This issue affects hackney: from 0.13.1 before 4.0.1. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows OCSP designated-responder authorization bypass via missing signature verification.
The OCSP response validation in public_key:pkix_ocsp_validate/5 does not verify that a CA-designated responder certificate was cryptographically signed by the issuing CA. Instead, it only checks that the responder certificate's issuer name matches the CA's subject name and that the certificate has the OCSPSigning extended key usage. An attacker who can intercept or control OCSP responses can create a self-signed certificate with a matching issuer name and the OCSPSigning EKU, and use it to forge OCSP responses that mark revoked certificates as valid.
This affects SSL/TLS clients using OCSP stapling, which may accept connections to servers with revoked certificates, potentially transmitting sensitive data to compromised servers. Applications using the public_key:pkix_ocsp_validate/5 API directly are also affected, with impact depending on usage context.
This vulnerability is associated with program files lib/public_key/src/pubkey_ocsp.erl and program routines pubkey_ocsp:is_authorized_responder/3.
This issue affects OTP from OTP 27.0 before OTP 28.4.2 and OTP 27.3.4.10, corresponding to public_key from 1.16 before 1.20.3 and 1.17.1.2, and ssl from 11.2 before 11.5.4 and 11.2.12.7. |
| The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process.
An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected.
This issue affects OTP from OTP 22.2 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10. |
| Skipper contains an incomplete fix for CVE-2026-50197 in which oversized request bodies bypass Open Policy Agent (OPA) deny-on-presence Rego policies. When a request body exceeds the configured maxBodyBytes limit, Skipper forwards the full payload to the upstream service while OPA evaluates against an empty parsed_body, so policies that deny requests based on body content are not enforced and forbidden actions proceed. No fixed version is available; v0.27.26 adds documentation guidance only. |
| A vulnerability was determined in CodeAstro Online Classroom 1.0. Affected by this issue is some unknown functionality of the file /OnlineClassroom/loginlinkadmin.php. Executing a manipulation of the argument aid can lead to sql injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. |
| The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to cause a memory corruption via a Read Request. |
| The affected product is vulnerable to a heap-based buffer overflow via a crafted MMS Initiate request. Remote code execution (RCE) has been demonstrated when ASLR is disabled; memory corruption or denial of service may occur in configurations where ASLR is enabled. |
| A NULL pointer dereference in the MMS Write Named Variable List handler, which may allow a network adjacent attacker to crash the server by sending a WriteRequest with an empty listOfData field. |
| The affected product is vulnerable to an Out-of-bounds read, which may allow an attacker to crash the parsing process and cause a denial of service. |
| Insufficient session expiration vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3. |
| Permissive cross-domain security policy with untrusted domains vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3. |
