| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix corruption during on-line resize
We observed a corruption during on-line resize of a file system that is
larger than 16 TiB with 4k block size. With having more then 2^32 blocks
resize_inode is turned off by default by mke2fs. The issue can be
reproduced on a smaller file system for convenience by explicitly
turning off resize_inode. An on-line resize across an 8 GiB boundary (the
size of a meta block group in this setup) then leads to a corruption:
dev=/dev/<some_dev> # should be >= 16 GiB
mkdir -p /corruption
/sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15))
mount -t ext4 $dev /corruption
dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15))
sha1sum /corruption/test
# 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test
/sbin/resize2fs $dev $((2*2**21))
# drop page cache to force reload the block from disk
echo 1 > /proc/sys/vm/drop_caches
sha1sum /corruption/test
# 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test
2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per
block group and 2^6 are the number of block groups that make a meta
block group.
The last checksum might be different depending on how the file is laid
out across the physical blocks. The actual corruption occurs at physical
block 63*2^15 = 2064384 which would be the location of the backup of the
meta block group's block descriptor. During the on-line resize the file
system will be converted to meta_bg starting at s_first_meta_bg which is
2 in the example - meaning all block groups after 16 GiB. However, in
ext4_flex_group_add we might add block groups that are not part of the
first meta block group yet. In the reproducer we achieved this by
substracting the size of a whole block group from the point where the
meta block group would start. This must be considered when updating the
backup block group descriptors to follow the non-meta_bg layout. The fix
is to add a test whether the group to add is already part of the meta
block group or not. |
| An authenticated remote code execution in Kentico Xperience allows authenticated users Staging Sync Server to upload arbitrary data to path relative locations. This results in path traversal and arbitrary file upload, including content that can be executed server side leading to remote code execution.This issue affects Kentico Xperience through 13.0.178. |
| An authentication bypass vulnerability in Kentico Xperience allows authentication bypass via the Staging Sync Server component password handling for the server defined None type. Authentication bypass allows an attacker to control administrative objects.This issue affects Xperience through 13.0.178. |
| An authentication bypass vulnerability in Kentico Xperience allows authentication bypass via the Staging Sync Server password handling of empty SHA1 usernames in digest authentication. Authentication bypass allows an attacker to control administrative objects.This issue affects Xperience through 13.0.172. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: Use raw spinlock for cgr_lock
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down. |
| Eibiz i-Media Server Digital Signage 3.8.0 contains a directory traversal vulnerability that allows unauthenticated remote attackers to access files outside the server's root directory. Attackers can exploit the 'oldfile' GET parameter to view sensitive configuration files like web.xml and system files such as win.ini. |
| Eibiz i-Media Server Digital Signage 3.8.0 contains an authentication bypass vulnerability that allows unauthenticated attackers to create admin users through AMF-encoded object manipulation. Attackers can send crafted serialized objects to the /messagebroker/amf endpoint to create administrative users without authentication, bypassing security controls. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: ncm: Fix handling of zero block length packets
While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX
set to 65536, it has been observed that we receive short packets,
which come at interval of 5-10 seconds sometimes and have block
length zero but still contain 1-2 valid datagrams present.
According to the NCM spec:
"If wBlockLength = 0x0000, the block is terminated by a
short packet. In this case, the USB transfer must still
be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If
exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent,
and the size is a multiple of wMaxPacketSize for the
given pipe, then no ZLP shall be sent.
wBlockLength= 0x0000 must be used with extreme care, because
of the possibility that the host and device may get out of
sync, and because of test issues.
wBlockLength = 0x0000 allows the sender to reduce latency by
starting to send a very large NTB, and then shortening it when
the sender discovers that there’s not sufficient data to justify
sending a large NTB"
However, there is a potential issue with the current implementation,
as it checks for the occurrence of multiple NTBs in a single
giveback by verifying if the leftover bytes to be processed is zero
or not. If the block length reads zero, we would process the same
NTB infintely because the leftover bytes is never zero and it leads
to a crash. Fix this by bailing out if block length reads zero. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tc358743: register v4l2 async device only after successful setup
Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: clear BM pool before initialization
Register value persist after booting the kernel using
kexec which results in kernel panic. Thus clear the
BM pool registers before initialisation to fix the issue. |
| EIBIZ i-Media Server Digital Signage 3.8.0 contains an unauthenticated configuration disclosure vulnerability that allows remote attackers to access sensitive configuration files via direct object reference. Attackers can retrieve the SiteConfig.properties file through an HTTP GET request, exposing administrative credentials, database connection details, and system configuration information. |
| QiHang Media Web Digital Signage 3.0.9 contains a cleartext credentials vulnerability that allows unauthenticated attackers to access administrative login information through an unprotected XML file. Attackers can retrieve hardcoded admin credentials by requesting the '/xml/User/User.xml' file, enabling direct authentication bypass. |
| TOTOLINK A3300R V17.0.0cu.557_B20221024 and N200RE V9.3.5u.6448_B20240521 and V9.3.5u.6437_B20230519 are vulnerable to Incorrect Access Control. Attackers can send payloads to the interface without logging in (remote). |
| TOTOLINK N200RE V9.3.5u.6437_B20230519 is vulnerable to command Injection in setOpModeCfg via hostName. |
| TOTOLINK A3300R V17.0.0cu.596_B20250515 is vulnerable to command injection in the function NTPSyncWithHost via the host_time parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: Do not truncate file size
'len' is used to store the result of i_size_read(), so making 'len'
a size_t results in truncation to 4GiB on 32-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
[1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547
[2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572
[3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677
[4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574
[5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u |
| QiHang Media Web Digital Signage 3.0.9 contains an unauthenticated remote code execution vulnerability in the QH.aspx file that allows attackers to upload malicious ASPX scripts. Attackers can exploit the file upload functionality by using the 'remotePath' and 'fileToUpload' parameters to write and execute arbitrary system commands on the server. |
| QiHang Media Web Digital Signage 3.0.9 contains an unauthenticated file deletion vulnerability in the QH.aspx endpoint that allows remote attackers to delete files without authentication. Attackers can exploit the 'data' parameter by sending a POST request with file paths to delete arbitrary files with web server permissions using directory traversal sequences. |
| Server-Side Request Forgery (SSRF) vulnerability in LMPixels Kerge kerge allows Server Side Request Forgery.This issue affects Kerge: from n/a through <= 4.1.3. |
