| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Fix copy_to_iter return value check
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: Add a upper bound on max_vclocks
syzbot reported WARNING in max_vclocks_store.
This occurs when the argument max is too large for kcalloc to handle.
Extend the guard to guard against values that are too large for
kcalloc |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-usb-v2: gl861: Fix null-ptr-deref in gl861_i2c_master_xfer
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: comp - Use same definition of context alloc and free ops
In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation
code into acomp"), the crypto_acomp_streams struct was made to rely on
having the alloc_ctx and free_ctx operations defined in the same order
as the scomp_alg struct. But in that same commit, the alloc_ctx and
free_ctx members of scomp_alg may be randomized by structure layout
randomization, since they are contained in a pure ops structure
(containing only function pointers). If the pointers within scomp_alg
are randomized, but those in crypto_acomp_streams are not, then
the order may no longer match. This fixes the problem by removing the
union from scomp_alg so that both crypto_acomp_streams and scomp_alg
will share the same definition of alloc_ctx and free_ctx, ensuring
they will always have the same layout. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer
In check_alu_op(), the verifier currently calls check_reg_arg() and
adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations.
However, if the destination register holds a pointer, these scalar
adjustments are unnecessary and potentially incorrect.
This patch adds a check to skip the adjustment logic when the destination
register contains a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix crypto buffers in non-linear memory
The crypto API, through the scatterlist API, expects input buffers to be
in linear memory. We handle this with the cifs_sg_set_buf() helper
that converts vmalloc'd memory to their corresponding pages.
However, when we allocate our aead_request buffer (@creq in
smb2ops.c::crypt_message()), we do so with kvzalloc(), which possibly
puts aead_request->__ctx in vmalloc area.
AEAD algorithm then uses ->__ctx for its private/internal data and
operations, and uses sg_set_buf() for such data on a few places.
This works fine as long as @creq falls into kmalloc zone (small
requests) or vmalloc'd memory is still within linear range.
Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so too
many tasks will increment the base stacks' addresses to a point where
virt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when that
happens.
In practice: too many parallel reads and writes on an encrypted mount
will trigger this bug.
To fix this, always alloc @creq with kmalloc() instead.
Also drop the @sensitive_size variable/arguments since
kfree_sensitive() doesn't need it.
Backtrace:
[ 945.272081] ------------[ cut here ]------------
[ 945.272774] kernel BUG at include/linux/scatterlist.h:209!
[ 945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary)
[ 945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[ 945.276877] Workqueue: writeback wb_workfn (flush-cifs-2)
[ 945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220
[ 945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b
[ 945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246
[ 945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030
[ 945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070
[ 945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000
[ 945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070
[ 945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010
[ 945.284407] FS: 0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000
[ 945.285262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0
[ 945.286683] Call Trace:
[ 945.286952] <TASK>
[ 945.287184] ? crypt_message+0x33f/0xad0 [cifs]
[ 945.287719] crypto_gcm_encrypt+0x36/0xe0
[ 945.288152] crypt_message+0x54a/0xad0 [cifs]
[ 945.288724] smb3_init_transform_rq+0x277/0x300 [cifs]
[ 945.289300] smb_send_rqst+0xa3/0x160 [cifs]
[ 945.289944] cifs_call_async+0x178/0x340 [cifs]
[ 945.290514] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 945.291177] smb2_async_writev+0x3e3/0x670 [cifs]
[ 945.291759] ? find_held_lock+0x32/0x90
[ 945.292212] ? netfs_advance_write+0xf2/0x310
[ 945.292723] netfs_advance_write+0xf2/0x310
[ 945.293210] netfs_write_folio+0x346/0xcc0
[ 945.293689] ? __pfx__raw_spin_unlock_irq+0x10/0x10
[ 945.294250] netfs_writepages+0x117/0x460
[ 945.294724] do_writepages+0xbe/0x170
[ 945.295152] ? find_held_lock+0x32/0x90
[ 945.295600] ? kvm_sched_clock_read+0x11/0x20
[ 945.296103] __writeback_single_inode+0x56/0x4b0
[ 945.296643] writeback_sb_inodes+0x229/0x550
[ 945.297140] __writeback_inodes_wb+0x4c/0xe0
[ 945.297642] wb_writeback+0x2f1/0x3f0
[ 945.298069] wb_workfn+0x300/0x490
[ 945.298472] process_one_work+0x1fe/0x590
[ 945.298949] worker_thread+0x1ce/0x3c0
[ 945.299397] ? __pfx_worker_thread+0x10/0x10
[ 945.299900] kthr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spmi: Add a check for remove callback when removing a SPMI driver
When removing a SPMI driver, there can be a crash due to NULL pointer
dereference if it does not have a remove callback defined. This is
one such call trace observed when removing the QCOM SPMI PMIC driver:
dump_backtrace.cfi_jt+0x0/0x8
dump_stack_lvl+0xd8/0x16c
panic+0x188/0x498
__cfi_slowpath+0x0/0x214
__cfi_slowpath+0x1dc/0x214
spmi_drv_remove+0x16c/0x1e0
device_release_driver_internal+0x468/0x79c
driver_detach+0x11c/0x1a0
bus_remove_driver+0xc4/0x124
driver_unregister+0x58/0x84
cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
__do_sys_delete_module+0x3ec/0x53c
__arm64_sys_delete_module+0x18/0x28
el0_svc_common+0xdc/0x294
el0_svc+0x38/0x9c
el0_sync_handler+0x8c/0xf0
el0_sync+0x1b4/0x1c0
If a driver has all its resources allocated through devm_() APIs and
does not need any other explicit cleanup, it would not require a
remove callback to be defined. Hence, add a check for remove callback
presence before calling it when removing a SPMI driver. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: mediatek: mtk-svs: Enable the IRQ later
If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.
[ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[ 0.227913] Call trace:
[ 0.227918] svs_isr+0x8c/0x538 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000086000004
| EC = 0x21: IABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
| CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
| Hardware name: FVP Base RevC (DT)
| pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
| pc : 0x0
| lr : ffa_device_remove+0x20/0x2c
| Call trace:
| 0x0
| device_release_driver_internal+0x16c/0x260
| driver_detach+0x90/0xd0
| bus_remove_driver+0xdc/0x11c
| driver_unregister+0x30/0x54
| ffa_driver_unregister+0x14/0x20
| cleanup_module+0x18/0xeec
| __arm64_sys_delete_module+0x234/0x378
| invoke_syscall+0x40/0x108
| el0_svc_common+0xb4/0xf0
| do_el0_svc+0x30/0xa4
| el0_svc+0x2c/0x7c
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix memory leak of PBLE objects
On rmmod of irdma, the PBLE object memory is not being freed. PBLE object
memory are not statically pre-allocated at function initialization time
unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD)
for it can be dynamically allocated during scale up and SD's remain
allocated till function deinitialization.
Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table
and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Explicitly check accesses to bpf_sock_addr
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: Add check for kstrdup
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference. |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: setup GPIO controller later in probe
The GPIO controller component of the sc16is7xx driver is setup too
early, which can result in a race condition where another device tries
to utilise the GPIO lines before the sc16is7xx device has finished
initialising.
This issue manifests itself as an Oops when the GPIO lines are configured:
Unable to handle kernel read from unreadable memory at virtual address
...
pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx]
...
Call trace:
sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
gpiod_direction_output_raw_commit+0x64/0x318
gpiod_direction_output+0xb0/0x170
create_gpio_led+0xec/0x198
gpio_led_probe+0x16c/0x4f0
platform_drv_probe+0x5c/0xb0
really_probe+0xe8/0x448
driver_probe_device+0xe8/0x138
__device_attach_driver+0x94/0x118
bus_for_each_drv+0x8c/0xe0
__device_attach+0x100/0x1b8
device_initial_probe+0x28/0x38
bus_probe_device+0xa4/0xb0
deferred_probe_work_func+0x90/0xe0
process_one_work+0x1c4/0x480
worker_thread+0x54/0x430
kthread+0x138/0x150
ret_from_fork+0x10/0x1c
This patch moves the setup of the GPIO controller functions to later in the
probe function, ensuring the sc16is7xx device has already finished
initialising by the time other devices try to make use of the GPIO lines.
The error handling has also been reordered to reflect the new
initialisation order. |
| In the Linux kernel, the following vulnerability has been resolved:
pcmcia: rsrc_nonstatic: Fix memory leak in nonstatic_release_resource_db()
When nonstatic_release_resource_db() frees all resources associated
with an PCMCIA socket, it forgets to free socket_data too, causing
a memory leak observable with kmemleak:
unreferenced object 0xc28d1000 (size 64):
comm "systemd-udevd", pid 297, jiffies 4294898478 (age 194.484s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 f0 85 0e c3 00 00 00 00 ................
00 00 00 00 0c 10 8d c2 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffda4245>] __kmem_cache_alloc_node+0x2d7/0x4a0
[<7e51f0c8>] kmalloc_trace+0x31/0xa4
[<d52b4ca0>] nonstatic_init+0x24/0x1a4 [pcmcia_rsrc]
[<a2f13e08>] pcmcia_register_socket+0x200/0x35c [pcmcia_core]
[<a728be1b>] yenta_probe+0x4d8/0xa70 [yenta_socket]
[<c48fac39>] pci_device_probe+0x99/0x194
[<84b7c690>] really_probe+0x181/0x45c
[<8060fe6e>] __driver_probe_device+0x75/0x1f4
[<b9b76f43>] driver_probe_device+0x28/0xac
[<648b766f>] __driver_attach+0xeb/0x1e4
[<6e9659eb>] bus_for_each_dev+0x61/0xb4
[<25a669f3>] driver_attach+0x1e/0x28
[<d8671d6b>] bus_add_driver+0x102/0x20c
[<df0d323c>] driver_register+0x5b/0x120
[<942cd8a4>] __pci_register_driver+0x44/0x4c
[<e536027e>] __UNIQUE_ID___addressable_cleanup_module188+0x1c/0xfffff000 [iTCO_vendor_support]
Fix this by freeing socket_data too.
Tested on a Acer Travelmate 4002WLMi by manually binding/unbinding
the yenta_cardbus driver (yenta_socket). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
kfd_lookup_process_by_pid hold the kfd process reference to ensure it
doesn't get destroyed while sending the segfault event to user space.
Calling kfd_lookup_process_by_pid as function parameter leaks the kfd
process refcount and miss the NULL pointer check if app process is
already destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9317/1: kexec: Make smp stop calls asynchronous
If a panic is triggered by a hrtimer interrupt all online cpus will be
notified and set offline. But as highlighted by commit 19dbdcb8039c
("smp: Warn on function calls from softirq context") this call should
not be made synchronous with disabled interrupts:
softdog: Initiating panic
Kernel panic - not syncing: Software Watchdog Timer expired
WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond
unwind_backtrace:
show_stack
dump_stack_lvl
__warn
warn_slowpath_fmt
smp_call_function_many_cond
smp_call_function
crash_smp_send_stop.part.0
machine_crash_shutdown
__crash_kexec
panic
softdog_fire
__hrtimer_run_queues
hrtimer_interrupt
Make the smp call for machine_crash_nonpanic_core() asynchronous. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex
Apparently the hex passphrase mechanism does not work on newer
chips/firmware (e.g. BCM4387). It seems there was a simple way of
passing it in binary all along, so use that and avoid the hexification.
OpenBSD has been doing it like this from the beginning, so this should
work on all chips.
Also clear the structure before setting the PMK. This was leaking
uninitialized stack contents to the device. |
