| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in the setParentalRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter parental-control behavior via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setMacFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to change device access control via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: enable the right set of ciphers
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc()
With a list_for_each() loop, if we don't find the item we are looking for
in the list, then the loop exits with the iterator, which is "dbell" in
this loop, pointing to invalid memory.
This code uses the "found" variable to determine if we have found the
doorbell we are looking for or not. However, the problem that the "found"
variable needs to be set to false at the start of each iteration,
otherwise after the first correct doorbell, then everything is marked as
found.
Reset the "found" to false at the start of the iteration and move the
variable inside the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: defer reset until cmd_mutex is unlocked
vub300_cmndwork_thread() holds cmd_mutex while it sends a command and
waits for the command response. If the response wait times out,
__vub300_command_response() kills the command URBs and then synchronously
resets the USB device through usb_reset_device().
That reset path re-enters the driver through vub300_pre_reset(), which
also takes cmd_mutex. The worker therefore tries to acquire the same
mutex recursively while it is still holding it from the command path.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real worker and timeout/reset carrier:
vub300_cmndwork_thread()
__vub300_command_response()
usb_lock_device_for_reset()
usb_reset_device()
vub300_pre_reset()
Lockdep reported the same-task recursive acquisition on cmd_mutex:
WARNING: possible recursive locking detected
... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv]
... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv]
Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv]
*** DEADLOCK ***
Return a flag from __vub300_command_response() when the timeout path needs
a device reset, then perform the reset after vub300_cmndwork_thread() has
cleared the in-flight command state and dropped cmd_mutex. The reset is
still attempted before mmc_request_done(), preserving the existing request
completion ordering while avoiding the recursive lock. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) unregister sysfs devices outside occ lock
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again. That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real unregister and callback carrier:
occ_shutdown()
hwmon_device_unregister()
occ_show_temp_1()
occ_update_response()
Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:
WARNING: possible circular locking dependency detected
... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
occ_update_response.isra.0+0xb/0x20 [vuln_msv]
occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
*** DEADLOCK ***
Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister(). Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held. Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN
kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort
when kvm_translate_vncr() returns -EFAULT. This is not always the case
as it's possible to encounter 'late' failures on the output of S1
translation, e.g. a GFN outside of the memslots.
Fix it by preparing an external abort before returning from
kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection
path while at it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
syz-executor292/9514 is trying to acquire lock:
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
but task is already holding lock:
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622
lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158
process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310
worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391
kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389
ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244
-> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}:
check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline]
check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904
__lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline]
start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline]
__flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
__cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline]
disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514
sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline]
kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline]
sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107
sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236
sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526
sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
This function runs within a kthread and need not necessarily finish
before system finishes boot and free_initmem() unmaps the .init.text
section. This function makes calls to SBI for probing unaligned access
speed, and if this is slow for some reason (say some debug prints were
added to SBI), the kthread can still be running at this point and result
in an instruction page fault when trying to fetch from the freed region.
[ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8
[ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000
[ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3
[ 25.661244] Oops [#1]
[ 25.662997] Modules linked in:
[ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY
[ 25.674669] Hardware name: Tenstorrent Blackhole (DT)
[ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20
[ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000
[ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30
[ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002
[ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000
[ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30
[ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0
[ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000
[ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
[ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402
[ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000
[ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c
[ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc
[ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4
[ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18
[ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc
Drop __init from its signature so that this doesn't happen. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
There is theoretical UAF if the conn is freed while the hci_sync task
is running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (sht3x) Fix unaligned accesses
Sashiko reports:
In sht3x_update_client(), the 16-bit temperature and humidity values are
extracted from a stack-allocated byte array using be16_to_cpup(). The
pointers passed to this function are calculated as buf and buf + 3. Since
the difference between the two pointers is an odd number of bytes, at
least one of them is guaranteed to be at an unaligned offset.
This will trigger an alignment fault on strict-alignment architectures
such as ARMv5 or SPARC, resulting in a kernel panic.
Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(),
and put_unaligned_be16() instead of cpu_to_be16(). |
| Incorrect access control in the setWiFiWpsStart function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to open a wireless pairing window via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setOpModeCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to change the device operating mode via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the delStaticDhcpRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove static DHCP reservations via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the killProcess function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to terminate critical services via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| The affected Ebyte
product exports administrative credentials and other
sensitive configuration information without adequate protection. An
unauthenticated attacker on the adjacent network who can obtain an
exported configuration file could recover valid credentials and use them
to access the device or similarly configured systems. |
| The affected Ebyte
product does not provide separation between limited and administrative
management functions. A low privileged authenticated attacker could
access security sensitive configuration functions and modify settings
that affect the confidentiality, integrity, or availability of the
device. |
| The affected Ebyte
product
uses a deprecated hashing algorithm in an authentication-related
operation. Under conditions where an attacker can manipulate or predict
the authentication exchange, the weak construction may reduce the
assurance provided by the authentication mechanism and facilitate
unauthorized access. |
| The affected Ebyte
product's vendor configuration utility permits access to administrative
functions without verifying the operator's identity under certain
credential conditions. An unauthenticated attacker on the adjacent
network could modify critical settings or change access credentials,
potentially preventing legitimate administrators from managing the
device. |
