| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Improper Verification of Cryptographic Signature and Improper Certificate Validation in the OPC UA driver of Apache PLC4X (PLC4J) allows an attacker in a network position between client and server to impersonate the OPC UA server and to read, forge or modify secure-channel traffic, including user credential ssent by the client.
The defect manifests differently depending on the version:
- In 0.9.0 through 0.11.0 a failed message-signature check is only logged and never enforced, and there is no mechanism to verify the server certificate: it is taken from the unauthenticated GetEndpoints discovery response and used to encrypt the user's password.
- In 0.12.0 through 0.13.1 the signature check is inverted (valid signatures are rejected, invalid ones accepted), and server certificates are accepted without a trust anchor by default.
- In all affected versions the default security policy is None. Starting with 0.12.0 the driver additionally continues silently at a weaker security policy than the one configured, and starting with 0.13.0 endpoint selection prefers the weakest matching endpoint.
Users checking only for one of these mechanisms may wrongly conclude they are unaffected.
This issue affects Apache PLC4X: from 0.9.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 verifies message signatures correctly, refuses to connect unless the server certificate can be verified against a configured trust store or pinned certificate, defaults to Basic256Sha256 with SignAndEncrypt, and fails the
connection if the negotiated security policy is weaker than the configured one. |
| Nezha versions 2.0.10 through 2.3.2 use a restricted HTTP client to validate user-configurable notification and DDNS webhook URLs, but the denylist did not cover IPv6 transition ranges — specifically the 6to4 prefix 2002::/16 and the local-use IPv4/IPv6 translation prefix 64:ff9b:1::/48. Because such addresses satisfy Go's netip.Addr.IsGlobalUnicast check, the URL validator accepted them. An authenticated user able to configure a webhook may be able to cause the dashboard to issue requests to an otherwise restricted IPv6 endpoint, but only where the dashboard's network provides unusual or non-standards-compliant routing for these transition ranges; no direct path to an IPv4 metadata, loopback, or private-network HTTP request has been demonstrated. The issue is fixed in version 2.3.3 (commit d1fcde8e), which blocks both prefixes. |
| utcp-gql before 1.1.1 and utcp-websocket before 1.1.1 contain server-side request forgery vulnerabilities due to incomplete application of CVE-2026-44661 fixes. The GraphQL plugin uses a vulnerable prefix check allowing bypass URLs like http://127.0.0.1.attacker.example, while the WebSocket plugin performs no URL validation despite documented security requirements. Attackers can force connections to internal services and cloud metadata endpoints by supplying malicious tool URLs in call templates, and receive configured API keys and OAuth tokens sent to attacker-controlled hosts. |
| Fleet before 4.87.0 does not protect the two endpoints that serve in-house iOS application packages and manifests (enterprise tier only) with the intended random, time-limited URL token. Because Apple's InstallEnterpriseApplication MDM command requires these URLs to be reachable without a Fleet session, they cannot rely on session-based authentication, and the missing token allows an unauthenticated attacker with network access to the Fleet server to download in-house IPA binaries and their metadata (bundle identifier, version, and name) by guessing sequential title identifiers. The impact is limited to read-only disclosure; there is no privilege escalation or write access, and the free tier is unaffected (it returns fleet.ErrMissingLicense). |
| stoatchat before 0.15.5 fails to revalidate usernames after Unicode sanitization, allowing attackers to create usernames with forbidden characters by submitting Unicode letters that transform into rejected characters. Attackers can bypass character allowlists and length limits to create reserved-name lookalikes, embed special characters, and exceed the 32-character storage limit. |
| Grav CMS 2.0.14 through 2.0.24 contains a privilege escalation vulnerability in the group and account blueprints. The access map is gated by a `security@: admin.super` guard that is resolved by the field's exact path, so a submitted flat dot-notation key such as `access.admin.super` (instead of the nested `access[admin][super]`) matches no blueprint rule, survives BlueprintSchema::filterArray() and flattening, and is written by FlexObject::update() via setNestedProperty(), which splits on `.` and reconstructs the nested value. An authenticated backend operator using the flex accounts backend who holds admin.users but not admin.super can therefore grant admin.super to their own account or to a group they belong to and escalate to full super-admin, gaining control over configuration, plugin and theme installation, the file manager, and all accounts. Fixed in 2.0.25, which drops any dotted key whose ancestor path is disabled or marked validate.ignore. |
| Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final. |
| vLLM before 0.29.0 accepts user-controlled stop_token_ids on the OpenAI-compatible POST /v1/completions and POST /v1/chat/completions endpoints but validates only that the values are integers, not that each token id is within the model vocabulary/logits range. When min_tokens > 0, the stop token ids are used as logits indices to suppress stop tokens, so an out-of-range id reaches a CUDA indexing operation (index_put_) and triggers a device-side assertion. An authenticated API user can send a single malformed completion request that returns 500 Internal Server Error and puts EngineCore into a fatal state, causing subsequent requests to fail until the service is restarted (denial of service). |
| vLLM through 0.29.0 fetches and fully materializes remote or inline media before enforcing its documented media controls (the VLLM_MAX_AUDIO_CLIP_FILESIZE_MB compressed-audio size cap, default 25 MB, and the per-modality --limit-mm-per-prompt item limits). Across four ingress paths — the shared media-acquisition layer (HTTPConnection.get_bytes()/async_get_bytes()), the chat completions audio_url/base64 path, the batch speech runner, and the Rust frontend POST /tokenize route — the server reads the entire HTTP response body, base64-decodes the inline payload, or spawns one fetch/decode task per media part, and only then applies the limit (or, on some paths, never applies it). A remote attacker can therefore cause the API server or batch-runner process to allocate memory and consume outbound bandwidth proportional to an attacker-chosen body size or media item count before the request is rejected, resulting in pre-inference memory and bandwidth exhaustion (denial of service). The chat and batch surfaces require an API key when one is configured; the Rust frontend /tokenize route is unauthenticated by design. There is no code execution or data disclosure impact. |
| SiYuan is a self-hosted personal knowledge management system. In versions up to and including 3.8.3, the kernel's authentication guards (CheckAuth in kernel/model/session.go and IsSessionOriginAllowed in kernel/util/net.go) fail open when the HTTP Origin header is absent, on the incorrect assumption that any browser-initiated cross-site request carries an Origin. Because browsers omit Origin on cross-site top-level GET navigations and no-cors GET subresource loads — and the session cookie is SameSite=Lax — a single cross-site GET issued from any attacker-controlled web page is granted RoleAdministrator, both on default installations with no access-authorization code and on password-protected instances with a live session. Combined with content-type sniffing on the /api/network/proxy endpoint, which allows attacker-controlled HTML to be served under SiYuan's own origin, this permits an unauthenticated remote attacker to execute arbitrary script in the SiYuan origin (http://127.0.0.1:6806), invoke administrator APIs, and exfiltrate the persistent kernel API token. This issue is fixed in version 3.8.4. |
| In JetBrains Rider before 2026.2.1 aI Assistant could auto-update third-party skills without user confirmation |
| SiYuan versions from v2.1.0 before v3.8.4 contain a cross-site request forgery vulnerability in the CheckAuth lock-screen pass-through branch that grants administrator access to loopback requests without validating Origin headers. Attackers can craft malicious web pages that force victims to terminate the kernel process, read workspace configuration and proxy settings, and trigger administrative actions via zero-credential cross-origin requests from the victim's browser. |
| A flaw was found in Moodle. Due to a missing capability check, a low-privileged authenticated user can trigger the recalculation of grade penalties without holding the required permissions. This issue allows unauthorized users to modify grade penalty records, potentially altering student assessment scores. |
| Joomla Extension - ordasoft.com - Unauthenticated Remote Code Execution in OrdaSoft Joomla CCK < 8.3.16 - site/uploader.php is reached through the component’s normal frontend routing (task=getContent), a task with no authentication or ACL check anywhere in the dispatch chain. The handler validates the uploaded file’s content with a real magic-byte MIME check, but the extension allow-list that would otherwise restrict the saved file’s extension was present in the source and commented out. The saved file’s extension was taken directly from the attacker-supplied filename with no validation, and the file was written to a path directly under the Joomla web root that is executed by the PHP handler. An image/PHP polyglot, a file whose header bytes satisfy the MIME check with PHP source appended after, passed the content check while carrying a .php extension of the attacker’s choosing. |
| Joomla Extension - ordasoft.com - Reflected Cross-Site Scripting in Vehicle Manager (Free) < 6.5.8 - The public vehicle-detail page (task=view) echoes the title request parameter directly into a double-quoted HTML attribute with no output encoding of any kind. A double-quote character in the parameter closes the attribute, allowing arbitrary markup, including a <script> tag, to be injected into the page. |
| UI misrepresentation in Omnibox in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to spoof address bar via a crafted HTML page. (Chromium security severity: Low) |
| Hugo versions from v0.161.0 through v0.165.0 run Node.js tools (css.PostCSS, css.TailwindCSS, js.Babel) under the Node.js permission model to restrict file system reads to the project directory and configured mounts. Because the Node.js permission model validates only the lexical path and follows symbolic links that point outside the allowed set, Hugo did not detect symlinks escaping the sandbox. An attacker who can contribute content to a Hugo project (for example via a pull request) can commit a symlink such as assets/css/x.css -> /etc/passwd together with a PostCSS plugin that reads it, allowing any file readable by the Hugo build process to be disclosed and potentially embedded in the published site. This affects builds using the default security configuration; projects that do not invoke Node.js tools are unaffected. Fixed in v0.166.0, which scans allowed paths and fails the build when a symbolic link resolves outside them. |
| Budibase versions before 3.45.0 fail to validate per-app authorization in the POST /api/global/groups/:groupId/apps endpoint, allowing builders to assign application roles across workspace boundaries. A builder of a single workspace can exploit missing per-app authorization checks to grant themselves admin roles in other workspaces by modifying user group role mappings. |
