| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: cdev: fix back-transition for iso_resource_auto client resource
The todo member of iso_resource_auto structure represents the state of the
client resource and normally transitions in the following order:
ISO_RES_AUTO_ALLOC -> ISO_RES_AUTO_REALLOC -> ISO_RES_AUTO_DEALLOC
However, concurrent access from the work item and the file descriptor
release function can cause the state to transition backwards from
ISO_RES_AUTO_DEALLOC to ISO_RES_AUTO_REALLOC.
Prevent the back-transition by checking the current state before
updating it in the work item. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Set gc_in_progress to true in unix_gc().
Igor Ushakov reported that unix_gc() could run with gc_in_progress
being false if the work is scheduled while running:
Thread 1 Thread 2 Thread 3
-------- -------- --------
unix_schedule_gc() unix_schedule_gc()
`- if (!gc_in_progress) `- if (!gc_in_progress)
|- gc_in_progress = true |
`- queue_work() |
unix_gc() <----------------/ |
| |- gc_in_progress = true
... `- queue_work()
| |
`- gc_in_progress = false |
|
unix_gc() <---------------------------------------------'
|
... /* gc_in_progress == false */
|
`- gc_in_progress = false
unix_peek_fpl() relies on gc_in_progress not to confuse GC
by MSG_PEEK.
Let's set gc_in_progress to true in unix_gc(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
BUG: KASAN: slab-use-after-free in l2cap_sock_kill
l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close
Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill
This is distinct from the two fixes already in this area: commit
e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid early lgr access in smc_clc_wait_msg
A CLC decline can be received while the handshake is still in an early
stage, before the connection has been associated with a link group.
The decline handling in smc_clc_wait_msg() updates link-group level sync
state for first-contact declines, but that state only exists after link
group setup has completed. Guard the link-group update accordingly and
keep the per-socket peer diagnosis handling unchanged.
This preserves the existing sync_err handling for established link-group
contexts and avoids touching link-group state before it is available. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: ensure ctx->rings is stable for task work flags manipulation
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: hold nfnl mutex in event notifier
We must serialize the release notifier and the config netlink function.
A concurrent thread can issue close() which can call the release function
while unrelated socket processes UNBIND request for same portid:
Oops: general protection fault, [..]
RIP: 0010:__instance_destroy+0x60/0x210 [nfnetlink_queue]
Call Trace:
nfqnl_recv_config+0x9b0/0xdc0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x7c2/0xeb0
? __pfx_nfnetlink_rcv_msg+0x10/0x10
After this, parallel UNBIND and URELEASE events are impossible.
This change isn't nice, but its the shortest fix given instances
are not refcounted and the nfnetlink config callback drops the
rcu read lock early due to need for sleeping allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
list_for_each_entry() iterates ci->i_cap_flush_list but drops
i_ceph_lock to send cap messages. During the unlock window,
handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries
with tid <= flush_tid from the list, release i_ceph_lock, and free
them via ceph_free_cap_flush() outside any lock. When the original
thread reacquires i_ceph_lock and the for-loop macro advances via
cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next
on freed memory.
The race timeline:
__kick_flushing_caps() handle_cap_flush_ack()
----------------------- -----------------------
holds i_ceph_lock <---
iterates to cf (tid=10)
prepares FLUSH message
drops i_ceph_lock <---
__send_cap() ── FLUSH(tid=10)
MDS sends FLUSH_ACK(tid=10)
---> acquires i_ceph_lock
cf->tid(10) <= flush_tid(10),
detaches cf from i_cap_flush_list
drops i_ceph_lock
ceph_free_cap_flush(cf) <- frees it!
acquires i_ceph_lock <---
for-loop advances:
cf = list_next_entry(cf, i_list)
-- UAF on freed cf->i_list.next
The cf was just sent by __kick_flushing_caps itself via __send_cap().
The MDS may respond with FLUSH_ACK quickly enough that
handle_cap_flush_ack() frees cf before __kick_flushing_caps can
finish the iteration.
Fix by converting to a manual while loop: save the next pointer
under i_ceph_lock before dropping it, then use the saved pointer
after reacquiring, so the potentially-freed cf is never accessed again. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Selectively expand io_mutex
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Serialize accesses to the owner and mirror list with separate lock
Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and
KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues:
- in sev_migrate_from(), when the destination KVM is a mirror, the mirror
entry is moved from the source's list to the owner's mirror_vms list,
without holding the owner's lock unlike other writers of the owner's
mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()).
A concurrent COPY or destroy can race with sev_migrate_from() and
corrupt the list.
- In sev_vm_destroy(), the *owner* is still active and could receive
concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes
sev->enc_context_owner to change. In this case the incorrect VM
receives kvm_put_kvm().
The second issue needs particular care because the owner could disappear
altogether (even though the race window is impossibly small) between
reading it and locking it. There is thus no way to perform the checks
under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU
(which would allow kvm_get_kvm_safe() under RCU critical section).
It is much simpler to just use a global lock, since the critical
sections are so small and the new lock is always a leaf lock. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: use WRITE_ONCE() when changing lower socket callbacks
kcm_attach() replaces a live lower TCP socket's sk_data_ready and
sk_write_space callbacks with KCM handlers, and kcm_unattach() restores
them later. Those callback-pointer updates are still plain stores even
though the same fields can be read and invoked concurrently on other
CPUs.
If another CPU observes an older callback snapshot after the live field
has already been restored, callback execution can run with a mismatched
target and sk_user_data state, leading to stale or misdirected wakeups.
Use WRITE_ONCE() for the callback replacement and restore operations so
these shared callback fields follow the same visibility contract already
established by the earlier 4022 fixes. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: extend bcm_tx_lock usage for data and timer updates
Stage new CAN frame content for an existing tx op into a kmalloc()'d
buffer and validate it there, mirroring the approach already used in
bcm_rx_setup(). Only copy the validated data into op->frames while
holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler()
can no longer observe a partially updated or unvalidated frame.
Add a missing error path for memcpy_from_msg() when copying CAN frame
data from userspace.
Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup()
under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same
lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the
torn 64-bit ktime_t read on 32-bit platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net(). |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c62486e ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix racing timeout handler
The bcmgenet_timeout handler tries to take down all tx queues when
a single queue times out. This is over zealous and causes many race
conditions with queues that are still chugging along. Instead lets
only restart the timed out queue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
