| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix mailbox segment buffer overflow
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remaining buffer space. Apply the same fix to the
hinic driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sprd: validate compress buffer sizes against fixed allocations
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: handle set_blocksize failures
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
omfs: handle set_blocksize failures
omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add package limit checks in parser functions
Add package limit checks in parser functions to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent
buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a possible underflow
We shouldn't trust the firmware about the length of the wowlan packet. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ACE size against SID sub-authorities
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths. |
| - On-Chip Debug Interface vulnerability in Johnson Controls Neo Series MVP2 allows Collect Data from Common Resource Locations.
This issue affects Neo Series MVP2: before 3.3b63. |
| - On-Chip Debug Interface vulnerability in Johnson Controls EasyIO FS32 allows Collect Data from Common Resource Locations.
This issue affects EasyIO FS32: before 3.3b63. |
| A weakness has been identified in GPAC up to 26.07.0. Affected by this issue is the function gf_dash_resolve_url of the file src/media_tools/dash_client.c of the component DASH Client. This manipulation causes buffer overflow. The attack is possible to be carried out remotely. Upgrading to version abi-16.26 can resolve this issue. Patch name: 4c8e26f278ff63eec57968f7bc696f604bb0cffd. It is recommended to upgrade the affected component. |
