| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.36.0, ValueReader.readShortstr decodes malformed UTF-8 bytes into replacement characters that can re-encode beyond the AMQP shortstr limit enforced by ValueWriter.writeShortstr. An attacker who can submit an RPC message with a malformed echoed property can cause reply publication in RpcServer.mainloop() or tutorial-style consumers to throw an unchecked exception before acknowledgement. The broker requeues the message, allowing the same message to disable replacement consumers until the queue is purged. This issue is fixed in version 5.36.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos. |
| Buffer overflow in WebRTC in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Hydra is a framework for elegantly configuring complex applications. From 1.3.4 until 1.3.6 and 1.4.0.dev9, the instantiate() target blacklist introduced for CVE-2026-68508 incompletely checks the effective callable selected by the target field. Execution wrappers such as timeit.timeit, executable deserialization through pickle.loads, aliases, callable-returning helpers, generic dispatch, and deferred calls can obscure or defer the effective target and bypass name-based authorization. An attacker who causes an application to instantiate untrusted Hydra configuration can use these gaps to execute code with the application's privileges. This issue is fixed in versions 1.3.6 and 1.4.0.dev9. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
| The CakeResponse::download() method in lib/Cake/Network/CakeResponse.php constructs a Content-Disposition header by directly interpolating a caller-supplied filename into a quoted-string value without sanitization. Two distinct injection vectors exist in the unpatched code. First, if the filename contains C0 control characters (CR or LF), PHP refuses to emit the entire Content-Disposition header, silently dropping the attachment disposition. The response body is then served with its own Content-Type (for example text/html for an .html attachment) and renders inline in the browser on the application origin, creating a stored cross-site scripting condition. The commit message notes this is reachable even when the download_attachments_on_load setting is enabled, meaning a victim merely needs to view a page that triggers the download. Second, a double-quote character in the filename terminates the quoted-string value early, permitting injection of additional Content-Disposition parameters. The affected code path covers all callers of CakeResponse::download(), including attribute downloads, proposal downloads, and restSearch exports. An authenticated user who can create or upload an attachment with a crafted filename (for example through MISP attribute naming or proposal attachment naming) can store the malicious filename. When any other authenticated user views the affected page, the unsanitized filename is reflected into the HTTP response header, resulting in header manipulation and potential execution of arbitrary HTML or JavaScript in the context of the application origin. The security impact is equivalent to a stored cross-site scripting vulnerability, allowing session hijacking, data exfiltration, and unauthorized actions on behalf of the victim. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT is_pem_format is affected because lazy PEM regular expression backtracks extensively. This occurs when a certificate-like input contains repeated BEGIN markers without a matching END marker. As a result, is_pem_format performs unbounded backtracking while searching for a PEM end marker. Consequently, an attacker can cause intensive CPU consumption. This issue is fixed in version 2.14.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short beacon and probe responses
libipw_process_probe_response() and the libipw_network_init() call it
makes assume the frame contains the full 36-byte beacon and probe
response prefix, but the ipw2100 and ipw2200 receive paths only
establish that a management frame carries the generic 24-byte
three-address header.
libipw_network_init() then computes the information element length as
stats->len - sizeof(*beacon)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() yields
65524 for a 24-byte beacon, and the parser then walks the receive
buffer as if it held almost 64 KiB of information elements, reading
past the allocation.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| TP-Link Tapo
C500 v2.0 contains an out-of-bounds stack write vulnerability in its ONVIF PTZ
SOAP handlers. An authenticated ONVIF client can submit an excessive number of
preset-related elements, causing writes beyond the bounds of fixed-size stack
arrays and resulting in a crash of the affected service.
Successful
exploitation may allow an authenticated attacker to cause the affected service
to crash, resulting in a denial-of-service condition. Repeated exploitation may
repeatedly disrupt camera management and PTZ-related functionality until the
service recovers or restarts. |
| Integer overflow in Compositing in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| libvips 8.19.0 contains a memory access vulnerability when processing little-endian PFM images. If the PFM text header length is not a multiple of four bytes, the mmap-based loader can expose pixel data at an address that is not properly aligned for float access. vips_avg_scan() subsequently dereferences the buffer through a float pointer, resulting in undefined behavior and process termination on strict-alignment architectures or UBSan-instrumented builds, leading to denial of service. |
| An incorrect buffer size calculation vulnerability exists in tinyexpr commit 4a7456e in new_expr(). For arity-0 expression nodes, including constants, variables, and zero-argument functions, the function allocates less memory than sizeof(te_expr) but treats the returned allocation as a complete te_expr object. This results in undefined behavior and can cause deterministic process termination in UBSan-instrumented builds. |
| An issue in Mercusys AC12 V2 allows a local attacker to execute arbitrary code via the UART serial interface on the printed circuit board (PCB) |
| tftp-hpa 5.4 before 6.0 contains an out-of-bounds read vulnerability in rewrite_string() in tftpd/remap.c that walks heap memory during jump label searches. Unauthenticated remote attackers can send read or write requests whose filename matches a remap jump rule to crash the forked in.tftpd request handler. |
| Payload is a free and open source headless content management system. In @payloadcms/plugin-form-builder versions before 3.90.0 and canary versions before 4.0.0-canary.34, an attacker can craft a form submission that executes code remotely on the server. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| Payload is a free and open source headless content management system. In versions from 3.0.0 before 3.90.0 and canary versions before 4.0.0-canary.34, a malformed multipart request body can cause multipart Content-Type processing to take an extremely long time, resulting in uncontrolled resource consumption. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| libmikmod before 3.3.14 contains a heap out-of-bounds read vulnerability in the Impulse Tracker loader load_it.c that allows attackers to read adjacent heap memory via oversized patterns. Attackers can supply a crafted IT module with more than 200 pattern rows, causing IT_ConvertTrack() to read past the itpat buffer and crash applications. |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Improper Neutralization of Special Elements Used in a Template Engine vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| In JetBrains TeamCity before 2026.1.3
2025.11.7 kotlin DSL sandbox escape leading to RCE on the server was possible |
| Quasar Framework is a framework for building high-performance Vue.js user interfaces. Prior to 3.3.0, several @quasar/app-vite SSR and SSG rendering paths interpolated ssrContext.nonce directly into quoted HTML attributes. An application that derives or overrides this value with attacker-controlled data can allow a quote to terminate the nonce attribute and inject additional attributes or markup into generated HTML across development and production SSR or SSG output. Cryptographically generated base64 or base64url nonces are not affected because they lack HTML attribute delimiters. This issue is fixed in version 3.3.0. |
