| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hugo is a static site generator. In versions after v0.123.0 and before v0.166.0, Hugo's symlink confinement checks stopped at the mount root itself, so a theme or module checked into themes/ (or a vendored module) could contain a symlink at a mount root (for example themes/mytheme/assets -> /some/dir/outside). Files behind such a symlink were readable during a site build through resources.Get, resources.Match and similar functions, and could be published to public/ via static mounts, bypassing the rule that theme and module mount sources must be local paths. Modules fetched via Go modules are not affected because Go module zips cannot contain symlinks, and this is not an escalation for the main project, which may already mount absolute paths by configuration. Fixed in v0.166.0, where symlinked mount roots and symlinked directories between the mount root and the module directory are treated as non-existent for all modules. As a workaround, inspect themes/ and vendored modules for symlinks at mount roots before building, or replace symlinks with explicit mounts. |
| Hugo versions from v0.161.0 through v0.165.0 run Node.js tools (css.PostCSS, css.TailwindCSS, js.Babel) under the Node.js permission model to restrict file system reads to the project directory and configured mounts. Because the Node.js permission model validates only the lexical path and follows symbolic links that point outside the allowed set, Hugo did not detect symlinks escaping the sandbox. An attacker who can contribute content to a Hugo project (for example via a pull request) can commit a symlink such as assets/css/x.css -> /etc/passwd together with a PostCSS plugin that reads it, allowing any file readable by the Hugo build process to be disclosed and potentially embedded in the published site. This affects builds using the default security configuration; projects that do not invoke Node.js tools are unaffected. Fixed in v0.166.0, which scans allowed paths and fails the build when a symbolic link resolves outside them. |
| The Grav Data Manager plugin (getgrav/grav-plugin-datamanager) versions 1.0.1 through 1.4.4 render stored data entries in the item-detail view (admin/templates/partials/item.html.twig) without escaping, applying Twig's `raw` filter — in some cases after a striptags('<br>') call that PHP's strip_tags() bypasses by preserving allowed tags together with their attributes. An unauthenticated visitor who submits a front-end form whose submissions are saved to user/data can store an HTML payload that executes as JavaScript in the session and origin of an administrator who later opens that entry in the classic admin panel, running with that administrator's privileges and CSRF token. Execution occurs without further interaction for list values (such as checkbox or multi-select fields) and on hover for ordinary text fields. Sites using the Grav 2.0 Admin Next interface are not affected, because it renders the same data through a separate, correctly escaping code path. The issue is fixed in Data Manager 1.4.5. |
| The Comments plugin (getgrav/grav-plugin-comments) for Grav CMS through version 1.2.10 registers an admin handler that returns comment data as JSON without any authentication check. The handler branches on isAdmin(), which only indicates that the admin service is registered on the current route rather than that the visitor is authenticated, and it echoes the JSON and calls exit() during the plugins stage, before the classic Admin plugin would render its login screen. On a site using the classic Admin plugin with Comments enabled (the default), an unauthenticated remote attacker can request /admin/comments/page:<n> (e.g. page:0.001) and retrieve every comment from the last 7 days, including each commenter's email address and the absolute server filesystem path of the data file. Sites running the Grav 2.0 Admin Next stack (admin2 + api) are not affected via this path. The issue is fixed in 1.2.11, which requires an authenticated user with admin.comments or admin.super and removes the absolute filePath from the response. |
| Grav is a flat-file CMS. In versions 2.0.19 through 2.0.24 — and in 2.0.0 through 2.0.18 and 1.7.x only where content Twig has been explicitly enabled — page content authored by a user holding only page-write permission is rendered through a Twig sandbox that allowlists get_cookie(), which returns any cookie sent with the current request, including the visitor's session cookie. Because the read occurs server-side via filter_input(INPUT_COOKIE, ...), the HttpOnly, Secure and SameSite attributes offer no protection. Grav then stores the finished post-Twig output in a page-content cache keyed only on page identity and the configuration checksum, with no session, user or request dimension and no bypass for authenticated visitors. A page published by a page-write user can therefore capture the session identifier of the next administrator who views it, after which the cached output serves that identifier to unauthenticated visitors, who can replay the cookie to authenticate as that administrator. Since 2.0.19, security.twig_content.process_enabled defaults to true and Security::applyTwigContentDefault() derives each page's process.twig flag from that gate, so content Twig runs on every page with no frontmatter or operator action. Fixed in 2.0.25; 1.7.x is outside the backport scope. |
| Grav CMS 2.0.14 through 2.0.24 contains a privilege escalation vulnerability in the group and account blueprints. The access map is gated by a `security@: admin.super` guard that is resolved by the field's exact path, so a submitted flat dot-notation key such as `access.admin.super` (instead of the nested `access[admin][super]`) matches no blueprint rule, survives BlueprintSchema::filterArray() and flattening, and is written by FlexObject::update() via setNestedProperty(), which splits on `.` and reconstructs the nested value. An authenticated backend operator using the flex accounts backend who holds admin.users but not admin.super can therefore grant admin.super to their own account or to a group they belong to and escalate to full super-admin, gaining control over configuration, plugin and theme installation, the file manager, and all accounts. Fixed in 2.0.25, which drops any dotted key whose ancestor path is disabled or marked validate.ignore. |
| Grav before 2.0.25 ships web server configuration samples whose access-control deny rules are matched case-sensitively. In webserver-configs/web.config (IIS), every deny rule (user_sensitive_folders, user_accounts, user_data, user_error_redirect, user_pages, system, vendor, ignore_folders) sets ignoreCase="false" on its URL Rewrite <match> element, overriding the IIS default of ignoreCase="true"; because these are rewrite matches rather than <requestFiltering> elements, there is no case-insensitive fallback. On IIS running over case-insensitive NTFS, an unauthenticated remote attacker can vary the case of a folder name or file extension (for example GET /user/CONFIG/system.YAML) so that no deny rule matches and the IIS static file handler resolves and returns the underlying file, disclosing sensitive data such as configuration secrets or account password hashes. Whether a bypassed file is actually returned depends on MIME registration: .json is served by default, while .yaml/.yml return HTTP 404.3 on a stock IIS unless a YAML MIME mapping has been added. The same class of gap exists in the bundled webserver-configs/lighttpd.conf, whose user/(config|env), directory, script-extension, root-file and dotfile rules lack the (?i) modifier, though it is lower risk because lighttpd typically runs on case-sensitive filesystems. Deployments served by Apache (.htaccess), nginx, Caddy, or the PHP built-in server are not affected. The issue is fixed in 2.0.25; because the .htaccess installer heal does not touch web.config or lighttpd.conf, operators must re-copy the corrected sample files after upgrading. |
| Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final. |
| Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host header before considering the authority of an absolute-form HTTP/1 request-target. In HttpConversionUtil.toHttp3Headers(HttpMessage, boolean) — reached via Http3FrameToHttpObjectCodec(false) — a non-empty Host header takes precedence over the request-target authority, contrary to the HTTP/1.1 rule that a server receiving an absolute-form request-target must ignore the Host header. In a Netty-based HTTP/1-to-HTTP/3 gateway, proxy, or protocol bridge, a remote client can send a request such as "GET https://trusted.example/admin HTTP/1.1" with "Host: attacker.example", causing components that validate, authorize, or route on the RFC-defined request-target authority to reach a different decision than the upstream HTTP/3 peer, which receives :authority derived from the conflicting Host header. This authority confusion can affect virtual-host routing, allow-list checks, backend selection, cache keys, and URL generation. The advisory reports integrity impact only (no code execution, memory corruption, or availability impact). Fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final. |
| Netty's STOMP codec (io.netty:netty-codec-stomp) contains a ByteBuf leak in StompSubframeDecoder. Once a frame's declared content-length has been fully read, the decoder allocates a chunk buffer from the channel allocator and parks it in an instance field while waiting for the single NUL byte that terminates the frame. If that byte never arrives, the buffer is never released: the replay Signal thrown by skipNullCharacter extends Error rather than Exception, so the decoder's catch(Exception) release path does not run, and StompSubframeDecoder overrides neither handlerRemoved0 nor channelInactive, so the buffer also survives channel teardown. A remote peer can leak one allocator buffer per connection by sending a complete, well-formed frame body and withholding its terminating NUL byte; with the default pooled allocator the memory is never returned to the pool or reclaimed by garbage collection, so the leak accumulates for the lifetime of the process and can lead to memory exhaustion. This affects versions up to and including 4.1.137.Final and versions 4.2.0.Final through 4.2.17.Final; it is fixed in 4.1.138.Final and 4.2.18.Final. |
| Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue growth flaw in HttpServerCodec. The codec tracks the HTTP method of each still-unanswered pipelined request; the first 32 entries are bit-packed into a single long, but every additional entry is appended to methodOverflowQueue, an ArrayDeque with no size limit and no rejection path. A remote, unauthenticated attacker who pipelines HTTP/1.1 requests on a single connection while withholding reads on their own end (preventing responses from being flushed) can grow this queue without bound, causing unbounded heap growth and denial of service. Affected versions are 4.2.0.Final through 4.2.17.Final and all releases up to and including 4.1.137.Final; the issue is fixed in 4.2.18.Final and 4.1.138.Final. |
| Netty (io.netty:netty-codec-http) versions up to and including 4.1.137.Final and from 4.2.0.Final through 4.2.17.Final accept an unlimited number of concurrent remote-initiated SPDY streams: SpdySessionHandler defaults localConcurrentStreams to Integer.MAX_VALUE and exposes no API to change it. A remote peer that opens a SPDY connection and sends millions of SYN_STREAM frames with FLAG_FIN=0 causes the server to allocate unbounded heap and direct memory, eventually triggering a JVM OutOfMemoryError and crashing the service. Fixed in 4.1.138.Final and 4.2.18.Final. |
| SiYuan before v3.8.4 does not HTML-escape stored flashcard block content before interpolating it into the card-manager list markup. Block content returned by /api/riff/getRiffCards is inserted into a card item template in app/src/card/viewCards.ts and assigned to listElement.innerHTML, so content such as <img src=invalid onerror=...> becomes an executable event-handler attribute. Because the SiYuan desktop (Electron) main window is created with nodeIntegration enabled and contextIsolation disabled, an administrator who opens the card manager on a workspace containing attacker-supplied flashcard content (for example introduced through contribution or import) executes the attacker's script in a privileged renderer, which can lead to arbitrary code execution on the host. The affected endpoint remains behind authentication and administrator-role checks; this is an untrusted-content-to-privileged-renderer issue, not an authorization bypass. |
| SiYuan v3.8.3 fails to HTML-escape the data-subtype attribute when generating gutter-button markup (app/src/protyle/gutter/button.ts, assigned via innerHTML in app/src/protyle/gutter/index.ts) from content pasted as plain-text Markdown containing a Kramdown inline attribute list (IAL). Because the shared Lute renderer parses Kramdown IAL from text/plain input, an attacker-supplied Markdown snippet using entity-encoded quotes in data-subtype breaks out of the attribute value when the gutter markup is re-parsed by the browser, injecting additional attributes such as autofocus and onfocus. If a victim pastes the crafted Markdown and the affected gutter control receives focus, the injected handler executes; in the Electron desktop application, where the main BrowserWindow enables Node integration and disables context isolation, this results in JavaScript execution with renderer Node.js privileges (remote code execution). Fixed in v3.8.4. |
| Flowise through 3.1.4 exposes GET /api/v1/upsert-history/:id and PATCH /api/v1/upsert-history without route-level permission checks, and the backing service performs no workspace or ownership validation. getAllUpsertHistory() returns UpsertHistory rows selected solely by an attacker-supplied chatflowid, and patchDeleteUpsertHistory() deletes rows by an attacker-supplied array of record UUIDs. As a result, any authenticated low-privilege user or valid API key can read or delete document-store upsert history belonging to other users and other workspaces whenever the target chatflowId (which is exposed publicly in /chatbot/<chatflowId> share links) or row ids are known. The retrievable flowData and result fields contain embedding, record-manager and vector-store node configuration, including per-node paramValues. No patched version is available. |
