| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush
nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop
replace without holding nh->lock, racing the unlocked IPv6 route
add/delete that mutate the list under nh->lock and free fib6_info
entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()):
BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
Read of size 8 at addr ffff888012953e18 by task exploit/146
nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
replace_nexthop (net/ipv4/nexthop.c:2610)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Unlike the other f6i_list walks, this one bumps each route's sernum via
fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock
around it would invert the established tb6_lock -> nh->lock order and
deadlock. As the only purpose is to invalidate cached dsts, bump the
IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead,
mirroring the rt_cache_flush() already done for IPv4 just above. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-smart2) DMA-align output buffer
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for this violation.
Any operation that triggers send_output_report() (like setting a fan speed
or updating the interval) causes the USB DMA mapping. On systems with
non-coherent caches, this structural bug causes immediate and deterministic
memory corruption.
Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not send ICMP/NDISC Redirects when peer allocation fails
When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry
under memory pressure or tree size caps, redirect handlers previously fell
back to sending un-rate-limited ICMP/NDISC Redirect messages.
In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL.
In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into
inet_peer_xrlim_allow(), which returned true when peer == NULL.
Because ICMP/NDISC Redirects are not part of the default global rate limit
mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates
an un-rate-limited ICMP packet storm.
Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and
ndisc_send_redirect() when peer is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Prevent access to unsupported weight registers
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read elements at index 3 and 4 from these
3-element arrays. This results in a global out-of-bounds read, which can
be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as
hardware register addresses for subsequent read and write operations. This
leads to invalid hardware register access, potentially causing hardware
misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan
control channels, but only the first three support weight control.
Fix the problem by extending the affected weight register arrays with
zeroed fields. The driver uses zeroed register addresses to determine
if a register is supported or not, and skips accesses for unsupported
registers. |
| In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix UAF of txrx_stats in nv_remove
nv_remove() frees the per-CPU txrx_stats before unregister_netdev().
Until unregister completes, ndo_get_stats64, the NAPI/xmit data path,
and nv_close()/drain may still access txrx_stats, leading to a
use-after-free.
Free the stats only after unregister_netdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: fix double free of multi-frag skb on DMA map failure
In rtase_start_xmit(), when the head buffer DMA mapping fails after
rtase_xmit_frags() has mapped all fragments, the error path clears
the fragment descriptors with rtase_tx_clear_range(), which frees
the skb through the last-frag slot and accounts tx_dropped. Control
then falls through to the common error label, which frees the same
skb a second time and counts it again.
Return right after clearing the fragments when the skb owns frags;
the no-frag case still drops through and frees the head skb once. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp
l2cap_le_connect_rsp() obtains a channel via
__l2cap_get_chan_by_ident() but neither holds a reference nor uses
l2cap_chan_hold_unless_zero() before locking and operating on it.
A concurrent l2cap_chan_del() triggered by a remote disconnect can
free the channel between the lookup and l2cap_chan_lock(), causing
a use-after-free.
The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler
l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero()
to safely hold a reference, but l2cap_le_connect_rsp() was left
unprotected.
Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup
and l2cap_chan_put() on the exit path, consistent with other L2CAP
response handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_sock_getname
Accessing iso_pi(sk)->conn requires lock_sock, which is not held here.
Fix by adding the lock/release. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: hold sk properly in iso_conn_ready
sk deref in iso_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk is currently
accessed without either:
[Task 1] [Task 2]
iso_sock_release
iso_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
iso_sock_kill(sk)
UAF on sk deref
Fix possible UAF by holding sk refcount in iso_conn_ready(). Also
recheck after lock_sock that the socket is still valid. Adjust locking
so conn->sk is cleared only under lock_sock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
iso_sock_timeout() takes lock_sock, so sync disabling the timer while
holding that lock may deadlock.
iso_sock_timeout() may also run concurrently with iso_conn_del(), which
leads to UAF
[Task 1] [Task hdev->workqueue]
iso_sock_timeout iso_conn_del
iso_conn_hold_unless_zero iso_chan_del
`------------> iso_conn_put
caller frees hcon
iso_conn_put
iso_conn_free
conn->hcon->iso_data = NULL; /* UAF */
Fix the deadlock by removing the disable from the lock_sock sections.
Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn
which may need to be freed in lock_sock section. Convert some of the
clear_timer to disable_timer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix refcounting of iso_conn
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------´
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
