| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Denial-of-Service vulnerability was discovered in the F-Secure and WithSecure products where aerdl.so/aerdl.dll may go into an infinite loop when unpacking PE files. It is possible that this can crash the scanning engine |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: Fix deadlocks with kctl removals at disconnection
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now. |
| In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the phar uncompressor code would recursively uncompress "quines" gzip files, resulting in an infinite loop. |
| The IFrame widget in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 6, 7.2 before fix pack 19, and older unsupported versions does not check the URL of the IFrame, which allows remote authenticated users to cause a denial-of-service (DoS) via a self referencing IFrame. |
| An external attacker is able to send a specially crafted email (with many recipients) and trigger a potential DoS of the system |
| Jenkins Pipeline: Stage View Plugin 2.26 and earlier does not correctly encode the ID of 'input' steps when using it to generate URLs to proceed or abort Pipeline builds, allowing attackers able to configure Pipelines to specify 'input' step IDs resulting in URLs that would bypass the CSRF protection of any target URL in Jenkins. |
| Jenkins Pipeline: Input Step Plugin 451.vf1a_a_4f405289 and earlier does not restrict or sanitize the optionally specified ID of the 'input' step, which is used for the URLs that process user interactions for the given 'input' step (proceed or abort) and is not correctly encoded, allowing attackers able to configure Pipelines to have Jenkins build URLs from 'input' step IDs that would bypass the CSRF protection of any target URL in Jenkins when the 'input' step is interacted with. |
| ModularSquareRoot in Crypto++ (aka cryptopp) through 8.9.0 allows attackers to cause a denial of service (infinite loop) via crafted DER public-key data associated with squared odd numbers, such as the square of 268995137513890432434389773128616504853. |
| CodeIgniter is a PHP full-stack web framework A vulnerability was found in the Language class that allowed DoS attacks. This vulnerability can be exploited by an attacker to consume a large amount of memory on the server. Upgrade to v4.4.7 or later.
|
| Attackers can create long chains of CAs that would lead to OctoRPKI exceeding its max iterations parameter. In consequence it would cause the program to crash, preventing it from finishing the validation and leading to a denial of service. Credits to Donika Mirdita and Haya Shulman - Fraunhofer SIT, ATHENE, who discovered and reported this vulnerability.
|
| Junrar is an open source java RAR archive library. In affected versions A carefully crafted RAR archive can trigger an infinite loop while extracting said archive. The impact depends solely on how the application uses the library, and whether files can be provided by malignant users. The problem is patched in 7.4.1. There are no known workarounds and users are advised to upgrade as soon as possible. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
This reverts commit 1a1975551943f681772720f639ff42fbaa746212.
This commit causes interrupts to be lost for FCoE devices, since it changed
sping locks from "bh" to "irqsave".
Instead, a work queue should be used, and will be addressed in a separate
commit. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/ASPM: Fix deadlock when enabling ASPM
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ
The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:
kcapi-rng -b 67 >/dev/null
There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.
Tested on a machine with Qualcomm Amberwing processor. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: improve robustness of the audit queue handling
If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon. With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.
This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon. With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems. For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.
The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling". There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present. This can
always be done at a later date if it proves necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: fix deadlock during failing recovery
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: sysfs: Fix hang when device state is set via sysfs
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
If the __qcuefi pointer is not set, then in the original code, we would
hold onto the lock. That means that if we tried to set it later, then
it would cause a deadlock. Drop the lock on the error path. That's
what all the callers are expecting. |
