| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 and IBM Security Verify Access Container 10.0 through 10.0.9.2 Reverse Proxy in certain configurations is vulnerable to a denial of service attack. |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. |
| IBM Planning Analytics 2.0, and 2.1 Local is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is vulnerable to a privilege escalation when using Liberty collectives. |
| A time-of-check to time-of-use (TOCTOU) race condition in the installation and uninstallation process of certain Zoom Clients for Windows could allow an authenticated local user to escalate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: validate split-point offset in indx_insert_into_buffer
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in fallocate
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
Free the UAR index returned by the hardware. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. |
| Dell ObjectScale, versions prior to 4.3.0.1, contain(s) a Path Traversal vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| websocket-driver is a WebSocket protocol handler with pluggable I/O. Prior to 0.8.2, WebSocket::Driver.server() passes a malformed Host header to URI.parse in lib/websocket/http/request.rb without catching URI::InvalidURIError, allowing a remote client to crash a TCP-backed WebSocket server when the application does not catch the error from parse(). This issue is fixed in version 0.8.2. |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns.
When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress.
The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len.
When a %NOTIFYEV: line longer than 39 bytes contains no " within the linearized region, the loop indices p1/p2 walk past value[39] and read adjacent stack memory until a stray quote byte is found or the index reaches len. The over-read string is then passed to strncmp()/atoi()/LOG_*, and if a quote byte is found out of bounds the subsequent value[p2] = '\0' performs a single-NUL out-of-bounds stack write at an attacker-influenced offset.
The %NOTIFYEV: payload carries network-derived content (LTIME network time, SIB1 base-station system information, CSPS/RRCSTATE), so a rogue cellular base station, a malicious or compromised modem module, or RF manipulation that induces an over-long notify line reaches the defect without any application interaction; the handler runs automatically on the unsolicited event in the modem RX thread.
The impact is out-of-bounds stack disclosure (into logs and parsing) and stack corruption that can crash the modem RX thread (denial of service). The write offset is only weakly controlled, so memory-safe code execution is not demonstrated. The fix bounds both scanning loops by out_len, keeping all accesses within the linearized buffer. |
