| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
hpfs: fix a crash if hpfs_map_dnode_bitmap fails
If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on
uninitialized quad buffer head, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| @nevware21/ts-utils is a comprehensive TypeScript/JavaScript utility library. Prior to version 0.14.0, the _copyProps function in lib/src/object/copy.ts uses for...in to iterate over source object properties without an Object.hasOwnProperty check, and does not filter dangerous keys (__proto__, constructor, prototype). This allows an attacker to pollute the prototype chain of all objects in the application. Version 0.14.0 patches the issue. |
| When grant-copy operations are processed, the respective grant may or may
not already be in use by another operation (a mapping or another copy).
For all copy operations the referenced guest frame is looked up. When
another operation is already active for the grant (the grant is "pinned"),
what is being supplied back to actually carry out permission checks and
copy operation may not be consistent: The permission check may be carried
out on a page different from the one involved in the copy. |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.12. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: This vulnerability applies to Windows host only. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Coherence product of Oracle Fusion Middleware (component: Core). The supported version that is affected is 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via TCP to compromise Oracle Coherence. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Coherence as well as unauthorized update, insert or delete access to some of Oracle Coherence accessible data and unauthorized read access to a subset of Oracle Coherence accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Human Resources Management product of Oracle JD Edwards (component: Human Resources). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows low privileged attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Human Resources Management. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Human Resources Management. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Identity Manager Connector product of Oracle Fusion Middleware (component: PeopleSoft Applications). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Identity Manager Connector. While the vulnerability is in Oracle Identity Manager Connector, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Identity Manager Connector accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Allocation of resources without limits vulnerability in ninenines cowlib allows an unauthenticated remote HTTP/2 or HTTP/3 peer to exhaust memory on the vulnerable server (or client) and cause a denial of service.
The HPACK and QPACK prefixed-integer decoder cow_hpack_common:dec_big_int/3 in src/cow_hpack_common.hrl (invoked from cow_hpack:decode/2 in src/cow_hpack.erl and from cow_qpack:decode_field_section/3 in src/cow_qpack.erl) reads continuation octets until it sees one whose high bit is clear, evaluating Int + (Value bsl M) at each step with the shift M growing by seven per octet. No limit is enforced on the number of continuation octets, on the resulting bit width, or on the value; the decoder consumes whatever encoded length the peer supplies.
Because Erlang integers are immutable, each intermediate Value bsl M and each accumulator update allocates a fresh bignum whose digit width grows linearly with the number of octets processed so far. Summed across the whole decode, the transient bignum digit materialization is on the order of the square of the encoded length. A single maximal HPACK indexed representation carried inside one HTTP/2 HEADERS plus one CONTINUATION frame at Cowboy's default max_frame_size_received can force hundreds of megabytes of transient allocation and garbage-collection churn before the resulting header-table index is rejected as invalid. Repeated or concurrent connections multiply the pressure and can drive the Erlang VM to memory exhaustion.
Cowlib is the HTTP parser used by Cowboy, RabbitMQ's management plugin, and other Erlang and Elixir HTTP/2 and HTTP/3 servers and clients, so any exposed endpoint that accepts HPACK or QPACK from an untrusted peer is reachable.
This issue affects cowlib: from 2.0.0 before 2.19.0. |
| Addressing certain issues, in particular related to operations which may
take excessively long and therefore would need preemption, has turned out
overly costly. Since alternatives (HVM/PVH: HAP, PV: shim) are commonly
available, the decision was to deprecate the functionality, while still
retaining it for people to use at their own (security) risk. Memory-wise
small enough guests may still be okay to run. |
| Vulnerability in the PeopleSoft Enterprise CS Student Financials product of Oracle PeopleSoft (component: Billing). The supported version that is affected is 9.2.38. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise CS Student Financials. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise CS Student Financials. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To manage the system, sysctl and platform operations are used by the
control domain or a possible Xenstore domain. Some of these operations
may not be executed in parallel, so a system-wide lock each is used.
The way those locks are acquired is, however, not providing any fairness.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking.
The sysctl issue is CVE-2026-62426.
The platform-op issue is CVE-2026-62427. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To manage the system, sysctl and platform operations are used by the
control domain or a possible Xenstore domain. Some of these operations
may not be executed in parallel, so a system-wide lock each is used.
The way those locks are acquired is, however, not providing any fairness.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking.
The sysctl issue is CVE-2026-62426.
The platform-op issue is CVE-2026-62427. |
| The EVTCHNOP_expand_array hypercall checks for whether FIFO event
channels are enabled, but without holding the correct lock. It can race
with EVTCHNOP_reset, resulting in dereferencing a NULL pointer. |
| The terraform-mcp-server before version 1.1.0 is vulnerable to a server-side request forgery issue in the streamable-HTTP transport that may allow an unauthenticated remote client to redirect the server's Terraform API requests, and the server-side authorization token, to an attacker-controlled endpoint. This vulnerability, CVE-2026-14869, is fixed in terraform-mcp-server 1.1.0. |
| Dompdf is an HTML to PDF converter for PHP. Versions 3.15 and prior are vulnerable to a File Existence Oracle attack through the manipulation of the CSS @font-face directive. By providing malicious HTML that references local files via the file:// protocol repeatedly, an attacker can trigger PHP memory exhaustion. Because Dompdf behaves differently depending on whether a referenced local file exists (an existing file is processed repeatedly until it triggers an "Allowed memory size exhausted" crash, whereas a missing file fails fast or is ignored and never hits the memory limit), an attacker can use this observable discrepancy as an oracle to enumerate sensitive files on the server regardless of CHROOT restrictions. Exploitation requires the attacker to supply unrestricted or unsanitized HTML in a request that permits large data, plus a configuration where Dompdf's memory limit is low enough to be exhausted (with $_dompdf_show_warnings=true making the overflow easier to reach). This issue has been fixed in version 3.16. |
| GitHub MCP Server is GitHub's official MCP Server. Prior to 1.1.0, the CompletionsHandler function in pkg/github/server.go accesses params.Ref without first checking whether it is nil, so a completion/complete request with a missing or empty ref field triggers a nil pointer dereference and a Go runtime panic; because the crash occurs before any authentication or token validation, any unauthenticated client able to send JSON-RPC messages can crash the server, resulting in a complete denial of service. This issue is fixed in version 1.1.0. |
| dd-trace is the Datadog APM client for Node.js. Prior to 5.100.0, W3C baggage propagation in packages/dd-trace/src/baggage.js and packages/dd-trace/src/opentracing/propagation/text_map.js parsed incoming baggage HTTP headers without enforcing DD_TRACE_BAGGAGE_MAX_ITEMS or DD_TRACE_BAGGAGE_MAX_BYTES on extraction. A remote, unauthenticated attacker can send a request whose baggage header contains an arbitrarily large number of comma-separated key-value pairs, or a single very large value, causing unbounded CPU and memory consumption and enabling a remote denial of service against any HTTP service with baggage propagation enabled. This issue is fixed in version 5.100.0. |
