| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libarchive. On 32-bit systems, an integer overflow vulnerability exists in the zisofs block pointer allocation logic. A remote attacker can exploit this by providing a specially crafted ISO9660 image, which can lead to a heap buffer overflow. This could potentially allow for arbitrary code execution on the affected system. |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. |
| A flaw was found in libarchive. This heap out-of-bounds read vulnerability exists in the RAR archive processing logic due to improper validation of the LZSS sliding window size after transitions between compression methods. A remote attacker can exploit this by providing a specially crafted RAR archive, leading to the disclosure of sensitive heap memory information without requiring authentication or user interaction. |
| IBM Concert 1.0.0 through 3.0.0 is vulnerable to a buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system. |
| Heap-based buffer overflow in Windows Core Messaging allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Storage Port Driver allows an authorized attacker to disclose information locally. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.7.1, the isInSubnet and isHostInSubnet methods in src/common.ts compare masked binary strings without validating that both operands use the same IP family. A cross-family containment check whose leading address bits match makes the masked strings compare equal even though IPv4 and IPv6 do not share an address space. An allowlist or denylist decision can therefore classify an address outside the intended range as contained. This issue is fixed in version 10.7.1. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.15.0 until 1.20.0, Axios shouldBypassProxy applies a quadratic trailing-dot regular expression to redirect hostnames. HTTP_PROXY or HTTPS_PROXY is configured, NO_PROXY or no_proxy is non-empty, redirects are followed, and a crafted redirect Location contains many dots followed by a non-dot character. Hostname.replace(/.+$/, '') backtracks quadratically while processing the crafted redirect hostname. Synchronous regular-expression processing can block the Node.js event loop and cause denial of service. This issue is fixed in version 1.20.0. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 0.27.2 until 0.34.0 and 1.20.0, Axios default-instance requests that omit an explicit method can read an inherited method value from Object.prototype. If another vulnerability in the same process pollutes Object.prototype.method, calls such as axios.request({ url }) and axios({ url }) can send a state-changing HTTP method instead of the expected default GET. Axios does not create the prototype pollution source. This is a read-side gadget in axios request dispatch. This issue is fixed in version 0.34.0 and 1.20.0. |
| Integer overflow or wraparound in Remote Desktop Client allows an unauthorized attacker to deny service over a network. |
| FalkorDB (Redis module) v4.20.1 to v4.20.4 was discovered to contain a stack overflow in the _ValidateUnion_Clauses function (/ast/ast_validations.c). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| FalkorDB (Redis module) v4.20.1 to v4.20.4 was discovered to contain a buffer overflow in the _Decode_GrB_Matrix function (/v19/decode_matrix.c). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| An integer overflow in the _BulkInsert_ReadProperty component (/bulk_insert.c) of FalkorDB (Redis module) v4.20.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Dancer2 versions before 2.2.0 for Perl do not strip CR and LF from response header names in headers_to_array.
The routine removes CR and LF from each header value but not from the name. A name carrying them therefore reaches the PSGI server intact. A server that does not validate keys writes it to the wire, so the bytes after the CRLF arrive as their own header line.
The application has to derive the header name from request data, not just the value.
An attacker who controls that data adds their own headers and splits the response. |
| Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone.
Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from.
A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running.
The memo is cleared only when an action is registered, which happens at setup, so an entry lasts for the life of the process, and its cap of 2048 entries bounds how many paths one caller can disable. In the configuration measured, the misroute lands on the less privileged action, so it is an authorization check not running rather than a privilege gain. |
| Lemonldap::NG::Portal versions from 2.20.0 before 2.21.6, from 2.22.0 before 2.23.4 for Perl allow unauthenticated OAuth2 token introspection because checkEndPointAuthenticationCredentials does not verify the client secret of a public Relying Party.
checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the authentication method deduced from the request, client_secret_basic or client_secret_post. introspection() rejects a caller only when that method is missing or none, so a request carrying a public client_id and an arbitrary or empty secret passes the endpoint's authentication check.
An attacker who holds an access token and knows the client_id of any public Relying Party can confirm the token is active and read its metadata, including scope, audience, expiry and the sub claim. The sub claim is computed with the calling Relying Party's user identifier attribute, so an attacker can translate a user identifier from one Relying Party to another, defeating per-client and pseudonymous identifiers. |
| Lemonldap::NG::Portal versions from 2.23.0 before 2.23.4 for Perl allow a PKCE bypass for public Relying Parties in "PKCE or secret" mode because checkEndPointAuthenticationCredentials does not verify the client secret.
With oidcRPMetaDataOptionsRequirePKCE set to 2, the authorization endpoint issues a code even when the request carries no code_challenge, and token() admits the exchange as long as a challenge was stored or an authentication method was returned for the caller. checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the method deduced from the request, so any Basic or form credential satisfies the secret branch. validatePKCEChallenge() then passes, because neither a challenge nor a verifier is present.
An attacker who intercepts an authorization code issued to a public Relying Party can exchange it for the user's access, ID and refresh tokens by replaying the client_id with an arbitrary secret, which is the attack PKCE prevents. Dynamic client registration creates every Relying Party in this mode. |
| Dell Boot Optimized Server Storage (BOSS), versions prior to 2.2.13.2038, contains an On-Chip Debug and Test Interface With Improper Access Control vulnerability in the SMCU on 17G BOSS-N1 controllers. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Unauthorized access. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.2.0 until 10.5.1, the Address6 isPrivate classifier in src/ipv6.ts does not recognize the NAT64 local-use range 64:ff9b:1::/48. Applications that combine isPrivate, isLoopback, and isLinkLocal for a trust-boundary decision can treat an internal IPv4 destination encoded through that range as external. Exploitation depends on a server network using an operator-selected NAT64 prefix within the local-use range. A successful bypass can cross the intended network trust boundary. This issue is fixed in version 10.5.1. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.5.1, the Address6 isLinkLocal method in src/ipv6.ts recognizes only fe80::/64 instead of the complete fe80::/10 IPv6 link-local range. An attacker-controlled address elsewhere in fe80::/10 can therefore pass a trust-boundary check that relies on isLinkLocal. The same address is identified as link-local by getType and getScope, exposing the inconsistent classification. A successful bypass can reach an on-link host outside the intended trust boundary. This issue is fixed in version 10.5.1. |
