| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message. |
| Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors. |
| 360fly 4K cameras allow unauthenticated Wi-Fi password changes and complete access with REST by using the Bluetooth Low Energy pairing procedure, which is available at any time and does not require a password. This affects firmware 2.1.4. Exploitation can use the 360fly Android or iOS application, or the BlueZ gatttool program. |
| The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message. |
| The Toshiba FlashAir SD-WD/WC series Class 6 model with firmware version 1.00.04 and later, FlashAir SD-WD/WC series Class 10 model W-02 with firmware version 2.00.02 and later, FlashAir SD-WE series Class 10 model W-03, FlashAir Class 6 model with firmware version 1.00.04 and later, FlashAir II Class 10 model W-02 series with firmware version 2.00.02 and later, FlashAir III Class 10 model W-03 series, FlashAir Class 6 model with firmware version 1.00.04 and later, FlashAir W-02 series Class 10 model with firmware version 2.00.02 and later, FlashAir W-03 series Class 10 model does not require authentication on accepting a connection from STA side LAN when "Internet pass-thru Mode" is enabled, which allows attackers with access to STA side LAN can obtain files or data. |
| Authentication bypass by assumed-immutable data vulnerability in Intel Security VirusScan Enterprise Linux (VSEL) 2.0.3 (and earlier) allows remote unauthenticated attacker to bypass server authentication via a crafted authentication cookie. |
| An issue was discovered in Moxa OnCell OnCellG3470A-LTE, AWK-1131A/3131A/4131A Series, AWK-3191 Series, AWK-5232/6232 Series, AWK-1121/1127 Series, WAC-1001 V2 Series, WAC-2004 Series, AWK-3121-M12-RTG Series, AWK-3131-M12-RCC Series, AWK-5232-M12-RCC Series, TAP-6226 Series, AWK-3121/4121 Series, AWK-3131/4131 Series, and AWK-5222/6222 Series. Any user is able to download log files by accessing a specific URL. |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. |
| Lack of authentication and authorization of cluster messages in Juniper Networks Junos Space may allow a man-in-the-middle type of attacker to intercept, inject or disrupt Junos Space cluster operations between two nodes. Affected releases are Juniper Networks Junos Space all versions prior to 17.1R1. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392. |
| IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 123862. |
| A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518. |
| Sangoma NetBorder / Vega Session Controller before 2.3.12-80-GA allows remote attackers to execute arbitrary commands via the web interface. |
| The recv_files function in receiver.c in the daemon in rsync 3.1.2, and 3.1.3-development before 2017-12-03, proceeds with certain file metadata updates before checking for a filename in the daemon_filter_list data structure, which allows remote attackers to bypass intended access restrictions. |
| The daemon in rsync 3.1.2, and 3.1.3-development before 2017-12-03, does not check for fnamecmp filenames in the daemon_filter_list data structure (in the recv_files function in receiver.c) and also does not apply the sanitize_paths protection mechanism to pathnames found in "xname follows" strings (in the read_ndx_and_attrs function in rsync.c), which allows remote attackers to bypass intended access restrictions. |
| An issue was discovered on Western Digital MyCloud PR4100 2.30.172 devices. The web administration component, /web/jquery/uploader/multi_uploadify.php, provides multipart upload functionality that is accessible without authentication and can be used to place a file anywhere on the device's file system. This allows an attacker the ability to upload a PHP shell onto the device and obtain arbitrary code execution as root. |
| Dataprobe iBootBar (with 2007-09-20 and possibly later released firmware) allows remote attackers to bypass authentication, and conduct power-cycle attacks on connected devices, via a DCRABBIT cookie. |
| WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors. |
| An insufficient authentication vulnerability on platforms where Junos OS instances are run in a virtualized environment, may allow unprivileged users on the Junos OS instance to gain access to the host operating environment, and thus escalate privileges. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D40 on QFX5110, QFX5200, QFX10002, QFX10008, QFX10016, EX4600 and NFX250; 15.1 prior to 15.1R5 on EX4600; 15.1X49 prior to 15.1X49-D70 on vSRX, SRX1500, SRX4100, SRX4200; 16.1 prior to 16.1R2 on EX4600, ACX5000 series. This issue does not affect vMX. No other Juniper Networks products or platforms are affected by this issue. |
