| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: make sure the SEID is linear before reading it
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix devlink_rel reference leak when notify work is pending
devlink_rel_nested_in_notify_work_schedule() takes a reference on the
devlink_rel for the notify work and then queues the work, ignoring the
return value of schedule_delayed_work(). If the work is already pending,
nothing new is queued, the work runs only once and drops only one
reference, so the extra one is leaked together with the devlink_rel and
its index in devlink_rels.
This is easy to hit. devl_register() of a nested instance queues the
work, and if the instance is unregistered before the work has run,
devlink_rel_put() queues it again while it is still pending. The work
also keeps rescheduling itself for as long as the parent devlink lock
cannot be taken, which widens the window. Registering and unregistering
a nested devlink instance 100 times while holding the parent lock leaks
all 100 devlink_rel objects.
The reschedule path in devlink_rel_nested_in_notify_work() has the same
problem: if the work was queued again while it was running, the
reference it holds is never dropped.
Drop the reference in both places when the work was already pending.
The pending work holds its own reference, so this can not be the last
one. |
| Stack-based buffer overflow in Windows Host Guardian Service allows an unauthorized attacker to deny service over a network. |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Subsystem for Linux allows an authorized attacker to elevate privileges locally. |
| Missing authentication for critical function in Windows Push Notifications allows an authorized attacker to elevate privileges locally. |
| Improper access control in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to perform tampering locally. |
| Heap-based buffer overflow in Windows Resume allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Network Device Enrollment Service (NDES) allows an unauthorized attacker to deny service over a network. |
| Out-of-bounds read in Windows Spaceport.sys allows an authorized attacker to elevate privileges locally. |
| Improper access control in Windows Modern Device Management (MDM) allows an authorized attacker to perform tampering locally. |
| Buffer over-read in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Disable the V3D interrupt across runtime suspend
vc4_irq_disable() masks the V3D interrupt sources and then calls
synchronize_irq() before the V3D is powered down. However, by itself,
this is not enough to quiesce the interrupt handler.
synchronize_irq() waits for handlers that have already set
IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE.
A GIC interrupt chip is able to mark an interrupt active as soon as a
CPU acknowledges it, so there these checks cover the whole dispatch path.
On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no
active state. A CPU that has read the hwirq out of the pending register
but has not yet reached handle_level_irq() stays invisible to
synchronize_irq().
During a power transition, vc4_irq() may therefore run after the power
domain is off, where every V3D register read will return 0xdeadbeef.
0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't
trigger NULL pointer dereference issues only because the functions
vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early
when there is no job pointer, but OUTOMEM is still able to schedule
vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it.
Therefore, fix the spurious interrupts by disabling the interrupt line
across the PM transition. To preserve the enable/disable balance, move
vc4_irq_install() and request the IRQ line disabled before the first
runtime resume. |
| In the Linux kernel, the following vulnerability has been resolved:
net: always dissect GSO packets in __virtio_net_hdr_to_skb()
Commit 9e8db5913264 ("net: avoid false positives in untrusted gso
validation") added a '&& skb->network_header' check before flow-dissecting
GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in
__virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called
virtio_net_hdr_*_to_skb() before initializing skb->network_header and
skb->dev.
Because __alloc_skb() and __build_skb_around() zero-initialize
skb->network_header to 0 (unlike mac_header and transport_header which
are initialized to ~0U), those four callers always had
skb->network_header == 0 and bypassed flow dissection in
__virtio_net_hdr_to_skb(). More generally, skb->network_header is an
offset from skb->head (where 0 is also a valid offset whenever
skb_headroom(skb) is 0), not a boolean flag.
Whenever the 'if (gso_type && skb->network_header)' branch was skipped,
the fallback 'else if (gso_type)' only pulled nh_min_len + thlen (40 bytes
for TCPv4) without dissecting the packet, without validating ip_proto or
n_proto, and without setting skb->transport_header.
If the packet has a malformed network header, it is not rejected and a
subsequent skb_probe_transport_header() also fails, leaving
skb->transport_header at ~0U (0xffff). Similarly, if an IPv4 packet
carries IP options (ihl > 5) or an IPv6 packet carries extension headers,
pulling only nh_min_len + thlen can leave the TCP header outside
skb->head. In both cases, tcp_hdrlen(skb) in skb_gso_transport_seglen()
reads out-of-bounds:
BUG: KASAN: slab-out-of-bounds in skb_gso_transport_seglen
Read of size 2 by task poc/133
skb_gso_transport_seglen (net/core/gso.c:155)
skb_gso_validate_mac_len (net/core/gso.c:270)
tbf_enqueue (net/sched/sch_tbf.c:260)
dev_qdisc_enqueue (net/core/dev.c:4227)
__dev_queue_xmit (net/core/dev.c:4884)
In addition, checking virtio_net_hdr_match_proto() only inside
'if (!skb->protocol)' before flow dissection both skipped validation when
skb->protocol was pre-set by the caller and rejected VLAN-tagged frames
whose outer L2 protocol is ETH_P_8021Q or ETH_P_8021AD.
Fix this by:
1. Initializing skb->dev and skb->network_header (plus skb->protocol for
IFF_TUN) before virtio_net_hdr_*_to_skb() in tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header(). In
tun_get_user(), drop the redundant skb_reset_mac_header(skb) in the
IFF_TUN case since __virtio_net_hdr_to_skb() unconditionally resets
mac_header.
2. Removing '&& skb->network_header' and the unvalidated
'else if (gso_type)' fallback in __virtio_net_hdr_to_skb() so all GSO
packets without VIRTIO_NET_HDR_F_NEEDS_CSUM are flow-dissected, have
their transport header pulled into linear data, and have
skb->transport_header set.
3. Moving the virtio_net_hdr_match_proto() check to after
skb_flow_dissect_flow_keys_basic(), validating keys.basic.n_proto
against hdr_gso_type. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb->len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transport header inside the
Ethernet header.
Such skbs are not exotic:
- At the time of commit d0c081b49137 ("flow_dissector: properly cap
thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO
skbs larger than 64KB (MTU checks are skipped for GSO, and
alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0
pages on top of the linear part).
- BIG TCP now makes skbs larger than 64KB common.
- The following patch makes tun_get_user() dissect IFF_TAP frames
before eth_type_trans() pulls the Ethernet header, so a GSO frame
carrying a 65522..65535 byte L3 packet will be dissected with
skb->len in [65536, 65549].
Compare as u32 instead. If the resulting offset cannot be represented
in the u16 key_control->thoff, cap it to U16_MAX and report the
dissection as failed rather than silently returning a wrong transport
offset. thoff is still set on failure, as some callers (such as
eth_get_headlen()) use it regardless of the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: disable rx napi when removing device
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt76 generic code. Disabling it in the mt76 generic code
was previously attempted and reverted because napi was disabled too
late and rx handlers could access freed structures. Note that the tx
side is enabled and disabled by the mt76 generic code.
It is disabled in mt7915_stop_hardware() since, unlike
mt7915_unregister_device(), is it also called in the probe path if an
error happens after rx napi is enabled. |
| Use after free in Windows Network Load Balancing allows an unauthorized attacker to execute code over an adjacent network. |
| Out-of-bounds read in Windows Key Storage Provider allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Windows kernel32.dll allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Graphic Fonts allows an unauthorized attacker to execute code over a network. |
