| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: harden adjust_idledly() against divide-by-zero and overflow
adjust_idledly() has several corner-case issues flagged during review:
1. If xe_gt_clock_init() failed to recognise the crystal clock,
gt->info.timestamp_base is 0, which makes idledly_units_ps also 0.
The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a
divide-by-zero and panics the kernel.
2. The tick-to-ns conversions are done in u32:
idledly * idledly_units_ps, (maxcnt - 1) * 1000
Both overflow u32 before DIV_ROUND_CLOSEST() sees them.
3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and
the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32.
4. The register only stores whole ticks, so the clamped ns value has
to be converted to ticks and back. DIV_ROUND_CLOSEST() can round
that conversion up past maxcnt:
maxcnt = 640 ns, one tick = 666664 ps
clamp: maxcnt - 1 = 639 ns
ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick
tick -> ns: 1 * 666664 / 1000 = 667 ns
667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640),
so xe_gt_WARN_ON() fires again on every subsequent init.
Return early if timestamp_base is 0 (the unknown-crystal path).
Do the conversions in u64 via the *_ULL() helpers so they cannot wrap.
Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays
strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay
while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is
cleared.
v2: Drop the redundant warn on the timestamp_base == 0 path;
xe_gt_clock_init() already warns on an unrecognised crystal clock.
Keep the early return to avoid the divide-by-zero. - Vinay
v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...)
instead of writing the raw tick count, which could clobber
INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the
inhibit-switch clear from the maxcnt clamp so a set inhibit bit no
longer forces a needless delay overwrite when the delay itself is
already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt).
(cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and
KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve()
tests the bit while vcpu_has_sve() reads the flag. A host that sets the
flag without the bit gets a vCPU with a NULL sve_state that the world
switch loads the guest's SVE state from.
Derive the flag from the bit, and drop the protected path's copy of the
host's flag, which is dead code since protected VMs are not allowed SVE. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524, which is part of version 0.9-rc3. |
| Heap-based buffer overflow in Microsoft Office Visio allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Access allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft PostScript Printer Driver allows an authorized attacker to execute code over a network. |
| Use after free in Windows Broadcast DVR User Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Update Delivery Optimization allows an authorized attacker to elevate privileges locally. |
| Improper resource shutdown or release in Windows UEFI allows an authorized attacker to bypass a security feature locally. |
| Use after free in Windows TCP/IP allows an unauthorized attacker to execute code over a network. |
| Buffer over-read in Windows Overlay Filter allows an authorized attacker to execute code locally. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Stack-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow when processing MQPUT operations with malformed message options. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow when processing MQPUT or MQPUT1 operations with malformed message handle properties. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or corrupt memory due to improper validation of buffer sizes in MQOPEN operations. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex
An RFCOMM connect() issued while a BR/EDR link is being authenticated
makes lockdep report a circular dependency, and the reported cycle is a
real AB/BA between rfcomm_mutex and hdev->lock.
rfcomm_security_cfm() is called from the HCI event path, which already
holds hdev->lock:
hci_rx_work()
hci_event_packet()
hci_cc_read_enc_key_size() [hdev->lock]
hci_encrypt_cfm() [hci_cb_list_lock]
rfcomm_security_cfm() [rfcomm_mutex]
while an RFCOMM connect() from userspace takes the same two locks the
other way round:
rfcomm_sock_connect()
rfcomm_dlc_open() [rfcomm_mutex]
__rfcomm_dlc_open()
rfcomm_session_create()
kernel_connect()
l2cap_sock_connect()
l2cap_chan_connect() [hdev->lock]
WARNING: possible circular locking dependency detected
kworker/u131:1/1128 is trying to acquire lock:
rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm]
but task is already holding lock:
hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0
Chain exists of:
rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock
hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback
the same way.
Both orders have to be seen in the same boot, which is why a BR/EDR
connection alone is not enough to show it: a session set up by the
remote side is created by rfcomm_accept_connection() in krfcommd, which
calls kernel_accept() and never takes hdev->lock under rfcomm_mutex.
Connecting a device that authenticates and encrypts the link and then
calling connect() on an RFCOMM socket towards any address - the connect
does not have to succeed, the order is recorded before the page timeout
- reports it every time.
Only the session socket has to be connected with the lock held, and it
does not: nothing else can see the socket before it is put on the
session list. So connect it first and take rfcomm_mutex afterwards,
which removes the rfcomm_mutex -> hdev->lock order for good, rather
than keeping the HCI event path out of rfcomm_mutex.
rfcomm_session_create() becomes rfcomm_session_connect(), which returns
the connected socket without touching the session list, and
rfcomm_dlc_open() adds the session once it holds the lock again. If
another opener added a session for the same pair while this socket was
connecting, that session is used and this socket is dropped.
__rfcomm_dlc_open() now takes the session it should use, and its state
check runs after the lock is re-acquired, so a DLC that was opened or
closed in the meantime is still handled.
Over an existing ACL link the connection can complete before the
session reaches the list, and the wakeup from the socket callback is
then lost, so krfcommd is woken once the session is visible.
Connecting without the lock opens a window in which the socket can be
closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds
nothing to do and returns without touching it, and rfcomm_dlc_open()
would then attach a DLC whose owner is gone. rfcomm_dlc_close() now
marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the
mark once it holds rfcomm_mutex again and drops the socket instead of
attaching the DLC. The mark is cleared when an open starts, so a DLC
that is reused is not affected. This covers both callers of
rfcomm_dlc_open(), the socket and the tty layer. |
