Total
33354 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-42098 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecdh - explicitly zeroize private_key private_key is overwritten with the key parameter passed in by the caller (if present), or alternatively a newly generated private key. However, it is possible that the caller provides a key (or the newly generated key) which is shorter than the previous key. In that scenario, some key material from the previous key would not be overwritten. The easiest solution is to explicitly zeroize the entire private_key array first. Note that this patch slightly changes the behavior of this function: previously, if the ecc_gen_privkey failed, the old private_key would remain. Now, the private_key is always zeroized. This behavior is consistent with the case where params.key is set and ecc_is_key_valid fails. | ||||
| CVE-2024-42097 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did. | ||||
| CVE-2024-42087 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. | ||||
| CVE-2024-42084 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftruncate: pass a signed offset The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake. | ||||
| CVE-2024-41081 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable(). | ||||
| CVE-2024-41075 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object corresponding to fd and req should be the same. | ||||
| CVE-2024-41072 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: wext: add extra SIOCSIWSCAN data check In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise. | ||||
| CVE-2024-41068 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix sclp_init() cleanup on failure If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails. | ||||
| CVE-2024-41047 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. | ||||
| CVE-2024-41044 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise. | ||||
| CVE-2024-41035 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. | ||||
| CVE-2024-41034 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug on rename operation of broken directory Syzbot reported that in rename directory operation on broken directory on nilfs2, __block_write_begin_int() called to prepare block write may fail BUG_ON check for access exceeding the folio/page size. This is because nilfs_dotdot(), which gets parent directory reference entry ("..") of the directory to be moved or renamed, does not check consistency enough, and may return location exceeding folio/page size for broken directories. Fix this issue by checking required directory entries ("." and "..") in the first chunk of the directory in nilfs_dotdot(). | ||||
| CVE-2024-41022 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work. | ||||
| CVE-2024-41016 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. | ||||
| CVE-2024-41007 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. | ||||
| CVE-2024-40996 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid splat in pskb_pull_reason syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug hint in pskb_may_pull. We'd like to retain this debug check because it might hint at integer overflows and other issues (kernel code should pull headers, not huge value). In bpf case, this splat isn't interesting at all: such (nonsensical) bpf programs are typically generated by a fuzzer anyway. Do what Eric suggested and suppress such warning. For CONFIG_DEBUG_NET=n we don't need the extra check because pskb_may_pull will do the right thing: return an error without the WARN() backtrace. | ||||
| CVE-2024-40993 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix suspicious rcu_dereference_protected() When destroying all sets, we are either in pernet exit phase or are executing a "destroy all sets command" from userspace. The latter was taken into account in ip_set_dereference() (nfnetlink mutex is held), but the former was not. The patch adds the required check to rcu_dereference_protected() in ip_set_dereference(). | ||||
| CVE-2024-40970 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled). | ||||
| CVE-2024-40966 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: add the option to have a tty reject a new ldisc ... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on. This avoids the BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659 when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock. | ||||
| CVE-2024-40948 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: fix crash on ZONE_DEVICE Not all pages may apply to pgtable check. One example is ZONE_DEVICE pages: they map PFNs directly, and they don't allocate page_ext at all even if there's struct page around. One may reference devm_memremap_pages(). When both ZONE_DEVICE and page-table-check enabled, then try to map some dax memories, one can trigger kernel bug constantly now when the kernel was trying to inject some pfn maps on the dax device: kernel BUG at mm/page_table_check.c:55! While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page fault resolutions, skip all the checks if page_ext doesn't even exist in pgtable checker, which applies to ZONE_DEVICE but maybe more. | ||||