| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: cope with large MAX_SKB_FRAGS
Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.
An easy reproducer is to run ssh to connect to the machine. With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320
The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.
Address the issue by checking if 2K buffers are insufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a kernel verifier crash in stacksafe()
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid possible physmem_info segment corruption
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/firmware: use dma non-coherent allocator
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup, when the iommu is enabled:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
Fix this by using the non-coherent allocator instead, I think there
might be a better answer to this, but it involve ripping up some of
APIs using sg lists. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()`
When enabling UBSAN on Raspberry Pi 5, we get the following warning:
[ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3
[ 387.903868] index 7 is out of range for type '__u32 [7]'
[ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151
[ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched]
[ 387.932525] Call trace:
[ 387.935296] dump_backtrace+0x170/0x1b8
[ 387.939403] show_stack+0x20/0x38
[ 387.942907] dump_stack_lvl+0x90/0xd0
[ 387.946785] dump_stack+0x18/0x28
[ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0
[ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d]
[ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ 387.966862] process_one_work+0x62c/0xb48
[ 387.971296] worker_thread+0x468/0x5b0
[ 387.975317] kthread+0x1c4/0x1e0
[ 387.978818] ret_from_fork+0x10/0x20
[ 387.983014] ---[ end trace ]---
This happens because the UAPI provides only seven configuration
registers and we are reading the eighth position of this u32 array.
Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by
accessing only seven positions on the '__u32 [7]' array. The eighth
register exists indeed on V3D 7.1, but it isn't currently used. That
being so, let's guarantee that it remains unused and add a note that it
could be set in a future patch. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path. This should have been removed when we let the page pool
handle the DMA mapping. This bug causes the warning:
WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0 |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
UBSAN reports the following 'subtraction overflow' error when booting
in a virtual machine on Android:
| Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cancel_delayed_work+0x34/0x44
| lr : cancel_delayed_work+0x2c/0x44
| sp : ffff80008002ba60
| x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0
| x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058
| x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d
| x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000
| x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000
| x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553
| x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620
| x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| cancel_delayed_work+0x34/0x44
| deferred_probe_extend_timeout+0x20/0x70
| driver_register+0xa8/0x110
| __platform_driver_register+0x28/0x3c
| syscon_init+0x24/0x38
| do_one_initcall+0xe4/0x338
| do_initcall_level+0xac/0x178
| do_initcalls+0x5c/0xa0
| do_basic_setup+0x20/0x30
| kernel_init_freeable+0x8c/0xf8
| kernel_init+0x28/0x1b4
| ret_from_fork+0x10/0x20
| Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception
This is due to shift_and_mask() using a signed immediate to construct
the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so
that it ends up decrementing from INT_MIN.
Use an unsigned constant '1U' to generate the mask in shift_and_mask(). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt5033: Bring back i2c_set_clientdata
Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper")
reworked the driver to use devm. While at it, the i2c_set_clientdata
was dropped along with the remove callback. Unfortunately other parts
of the driver also rely on i2c clientdata so this causes kernel oops.
Bring the call back to fix the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc2991) re-order conditions to fix off by one bug
LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL
(4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we
have read one element beyond the end of the array. Flip the conditions
around so that we check if "channel" is valid before using it as an array
index. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix out-of-bounds issue when preparing trampoline image
We get the size of the trampoline image during the dry run phase and
allocate memory based on that size. The allocated image will then be
populated with instructions during the real patch phase. But after
commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im`
argument is inconsistent in the dry run and real patch phase. This may
cause emit_imm in RV64 to generate a different number of instructions
when generating the 'im' address, potentially causing out-of-bounds
issues. Let's emit the maximum number of instructions for the "im"
address during dry run to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Prevent out of bounds access in performance query extensions
Check that the number of perfmons userspace is passing in the copy and
reset extensions is not greater than the internal kernel storage where
the ids will be copied into.
(cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix potential integer overflow in page size calculation
Explicitly cast tbo->page_alignment to u64 before bit-shifting to
prevent overflow when assigning to min_page_size. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists()
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Assign ->num before accessing ->hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: PAC1934: fix accessing out of bounds array index
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Use variable length array instead of fixed size
Should fix smatch warning:
ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix buffer overflow in print_cpu_stall_info()
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
