| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in the realtime.cgi endpoint of Deep Sea Electronics devices DSE855 v1.1.0 to v1.1.26 allows attackers to gain access to the admin panel and complete control of the device. |
| A vulnerability was found in Forklift Controller. There is no verification against the authorization header except to ensure it uses bearer authentication. Without an Authorization header and some form of a Bearer token, a 401 error occurs. The presence of a token value provides a 200 response with the requested information. |
| Swissphone DiCal-RED 4009 devices allow a remote attacker to gain read access to almost the whole file system via anonymous FTP. |
| Swissphone DiCal-RED 4009 devices allow an unauthenticated attacker use a port-2101 TCP connection to gain access to operation messages that are received by the device. |
| The PeproDev Ultimate Profile Solutions plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the handel_ajax_req() function in versions 1.9.1 to 7.5.2. This makes it possible for unauthenticated attackers to update arbitrary user's metadata which can be leveraged to block an administrator from accessing their site when wp_capabilities is set to 0. |
| BloodX 1.0 contains an authentication bypass vulnerability in login.php that allows attackers to access the dashboard without valid credentials. Attackers can exploit the vulnerability by sending a crafted payload with '=''or' parameters to bypass login authentication and gain unauthorized access. |
| SystemUI has an incorrect component protection setting, which allows access to specific information. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| Paperless-ngx is a document management system that transforms physical documents into a searchable online archive. Starting in version 2.5.0 and prior to version 2.8.6, remote user authentication allows API access even if API access is explicitly disabled. Version 2.8.6 contains a patchc for the issue. |
| The JobSearch WP Job Board plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 2.6.7. This is due to the plugin not properly verifying a users identity when verifying an email address through the user_account_activation function. This makes it possible for unauthenticated attackers to log in as any user, including site administrators if the users email is known. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting'), Improper Authentication vulnerability in Soliloquy Team Slider by Soliloquy allows Cross-Site Scripting (XSS).This issue affects Slider by Soliloquy: from n/a through 2.7.6. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
| BCryptPasswordEncoder.matches(CharSequence,String) will incorrectly return true for passwords larger than 72 characters as long as the first 72 characters are the same. |
| A vulnerability was found in Alteryx Server. Affected by this issue is some unknown functionality of the file /gallery/api/status/. Performing manipulation results in improper authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 2023.1.1.13.486, 2023.2.1.10.293, 2024.1.1.9.236, 2024.2.1.6.125 and 2025.1.1.1.31 can resolve this issue. Upgrading the affected component is recommended. |
| Applications and libraries which misuse connection.serverAuthenticate (via callback field ServerConfig.PublicKeyCallback) may be susceptible to an authorization bypass. The documentation for ServerConfig.PublicKeyCallback says that "A call to this function does not guarantee that the key offered is in fact used to authenticate." Specifically, the SSH protocol allows clients to inquire about whether a public key is acceptable before proving control of the corresponding private key. PublicKeyCallback may be called with multiple keys, and the order in which the keys were provided cannot be used to infer which key the client successfully authenticated with, if any. Some applications, which store the key(s) passed to PublicKeyCallback (or derived information) and make security relevant determinations based on it once the connection is established, may make incorrect assumptions. For example, an attacker may send public keys A and B, and then authenticate with A. PublicKeyCallback would be called only twice, first with A and then with B. A vulnerable application may then make authorization decisions based on key B for which the attacker does not actually control the private key. Since this API is widely misused, as a partial mitigation golang.org/x/[email protected] enforces the property that, when successfully authenticating via public key, the last key passed to ServerConfig.PublicKeyCallback will be the key used to authenticate the connection. PublicKeyCallback will now be called multiple times with the same key, if necessary. Note that the client may still not control the last key passed to PublicKeyCallback if the connection is then authenticated with a different method, such as PasswordCallback, KeyboardInteractiveCallback, or NoClientAuth. Users should be using the Extensions field of the Permissions return value from the various authentication callbacks to record data associated with the authentication attempt instead of referencing external state. Once the connection is established the state corresponding to the successful authentication attempt can be retrieved via the ServerConn.Permissions field. Note that some third-party libraries misuse the Permissions type by sharing it across authentication attempts; users of third-party libraries should refer to the relevant projects for guidance. |
| An issue in RTSPtoWeb v.2.4.3 allows a remote attacker to obtain sensitive information and executearbitrary code via the lack of authentication mechanisms |
| OpenObserve is a cloud-native observability platform. Prior to version 0.16.0, organization invitation tokens do not expire once issued, remain valid even after the invited user is removed from the organization, and allow multiple invitations to the same email with different roles where all issued links remain valid simultaneously. This results in broken access control where a removed or demoted user can regain access or escalate privileges. This issue has been patched in version 0.16.0. |
| NVIDIA Display Driver for Linux and Windows contains a vulnerability in the kernel mode driver, where an attacker could access memory outside bounds permitted under normal use cases. A successful exploit of this vulnerability might lead to denial of service, data tampering, or information disclosure. |
| Stardust is a platform for streaming isolated desktop containers. With this exploit, inter container communication (ICC) is not disabled. This would allow users within a container to access another containers agent, therefore compromising access.The problem has been patched in any Stardust build past 12/20/24. Users are advised to upgrade. Users may also manually disable ICC if they are unable to upgrade. |
| A vulnerability classified as critical was found in Xiongmai AHB7804R-MH-V2, AHB8004T-GL, AHB8008T-GL, AHB7004T-GS-V3, AHB7004T-MHV2, AHB8032F-LME and XM530_R80X30-PQ_8M. Affected by this vulnerability is an unknown functionality of the component Sofia Service. The manipulation with the input ff00000000000000000000000000f103250000007b202252657422203a203130302c202253657373696f6e494422203a202230783022207d0a leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260605 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |