| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco Sourcefire Snort 3.0 before build 233 mishandles Ether Type Validation. Since valid ether type and IP protocol numbers do not overlap, Snort++ stores all protocol decoders in a single array. That makes it possible to craft packets that have IP protocol numbers in the ether type field which will confuse the Snort++ decoder. For example, an eth:llc:snap:icmp6 packet will cause a crash because there is no ip6 header with which to calculate the icmp6 checksum. Affected decoders include gre, llc, trans_bridge, ciscometadata, linux_sll, and token_ring. The fix adds a check in the packet manager to validate the ether type before indexing the decoder array. An out of range ether type will raise 116:473. |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| Tenable Nessus before 6.10.2 (as used alone or in Tenable Appliance before 4.5.0) was found to contain a flaw that allowed a remote, authenticated attacker to upload a crafted file that could be written to anywhere on the system. This could be used to subsequently gain elevated privileges on the system (e.g., after a reboot). This issue only affects installations on Windows. |
| An issue was discovered in Veritas NetBackup Before 7.7.2 and NetBackup Appliance Before 2.7.2. Arbitrary privileged command execution, using whitelist directory escape with "../" substrings, can occur. |
| The Symantec Messaging Gateway, when processing a specific email attachment, can allow a malformed or corrupted Word file with a potentially malicious macro through despite the administrator having the 'disarm' functionality enabled. This constitutes a 'bypass' of the disarm functionality resident to the application. |
| NVIDIA GeForce Experience contains a vulnerability in NVIDIA Web Helper.exe, where untrusted script execution may lead to violation of application execution policy and local code execution. |
| An elevation of privilege vulnerability in the NVIDIA sound driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Moderate because it first requires compromising a privileged process. Product: Android. Versions: N/A. Android ID: A-34373711. References: N-CVE-2017-6249. |
| An elevation of privilege vulnerability in the NVIDIA sound driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Moderate because it first requires compromising a privileged process. Product: Android. Versions: N/A. Android ID: A-34372667. References: N-CVE-2017-6248. |
| An elevation of privilege vulnerability in the NVIDIA sound driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High due to the possibility of local arbitrary code execution in a privileged process in the kernel. Product: Android. Versions: N/A. Android ID: A-34386301. References: N-CVE-2017-6247. |
| D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Command Bypass attacks via unspecified vectors. |
| F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 are vulnerable to a denial of service attack when the MPTCP option is enabled on a virtual server. Data plane is vulnerable when using the MPTCP option of a TCP profile. There is no control plane exposure. An attacker may be able to disrupt services by causing TMM to restart hence temporarily failing to process traffic. |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 12.0.0 to 12.1.1, 11.6.0 to 11.6.1, 11.5.0 - 11.5.4, virtual servers with a configuration using the HTTP Explicit Proxy functionality and/or SOCKS profile are vulnerable to an unauthenticated, remote attack that allows modification of BIG-IP system configuration, extraction of sensitive system files, and/or possible remote command execution on the BIG-IP system. |
| Firejail before 0.9.44.4, when running on a Linux kernel before 4.8, allows context-dependent attackers to bypass a seccomp-based sandbox protection mechanism via the --allow-debuggers argument. |
| SolarWinds LEM (aka SIEM) before 6.3.1 has an incorrect sudo configuration, which allows local users to obtain root access by editing /usr/local/contego/scripts/hostname.sh. |
| An issue was discovered in Carlo Gavazzi VMU-C EM prior to firmware Version A11_U05, and VMU-C PV prior to firmware Version A17. The access control flaw allows access to most application functions without authentication. |
| Certain Technicolor devices have an SNMP access-control bypass, possibly involving an ISP customization in some cases. The Technicolor (formerly Cisco) DPC3928SL with firmware D3928SL-P15-13-A386-c3420r55105-160127a could be reached by any SNMP community string from the Internet; also, you can write in the MIB because it provides write properties, aka Stringbleed. NOTE: the string-bleed/StringBleed-CVE-2017-5135 GitHub repository is not a valid reference as of 2017-04-27; it contains Trojan horse code purported to exploit this vulnerability. |
| Unspecified vulnerability in the HTTP/2 experimental feature in Apache Traffic Server before 5.3.x before 5.3.2 has unknown impact and attack vectors, a different vulnerability than CVE-2015-5168. |
