| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: Fix OOB read due to missing payload bound check
Currently, The event_seq_changed() handler processes a variable number
of properties sent by the firmware. The number of properties is indicated
by the firmware and used to iterate over the payload. However, the
payload size is not being validated against the actual message length.
This can lead to out-of-bounds memory access if the firmware provides a
property count that exceeds the data available in the payload. Such a
condition can result in kernel crashes or potential information leaks if
memory beyond the buffer is accessed.
Fix this by properly validating the remaining size of the payload before
each property access and updating bounds accordingly as properties are
parsed.
This ensures that property parsing is safely bounded within the received
message buffer and protects against malformed or malicious firmware
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in dnode page
As Jiaming Zhang reported:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x17e/0x800 mm/kasan/report.c:480
kasan_report+0x147/0x180 mm/kasan/report.c:593
data_blkaddr fs/f2fs/f2fs.h:3053 [inline]
f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline]
f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855
f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195
prepare_write_begin fs/f2fs/data.c:3395 [inline]
f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594
generic_perform_write+0x2c7/0x910 mm/filemap.c:4112
f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline]
f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x546/0xa90 fs/read_write.c:686
ksys_write+0x149/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch()
The "link_id" value comes from the user via debugfs. If it's larger
than BITS_PER_LONG then that would result in shift wrapping and
potentially an out of bounds access later. In fact, we can limit it
to IEEE80211_MLD_MAX_NUM_LINKS (15).
Fortunately, only root can write to debugfs files so the security
impact is minimal. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in devs.path
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS
elements so this >= needs to be > to prevent an out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible OOB access in mt7996_tx()
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use
hdev->dump.head. However, dev_coredumpv can free the buffer. From
dev_coredumpm_timeout documentation, which is used by dev_coredumpv:
> Creates a new device coredump for the given device. If a previous one hasn't
> been read yet, the new coredump is discarded. The data lifetime is determined
> by the device coredump framework and when it is no longer needed the @free
> function will be called to free the data.
If the data has not been read by the userspace yet, dev_coredumpv will
discard new buffer, freeing hdev->dump.head. This leads to
vmalloc-out-of-bounds error when skb_put_data tries to access
hdev->dump.head.
A crash report from syzbot illustrates this:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in skb_put_data
include/linux/skbuff.h:2752 [inline]
BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240
net/bluetooth/coredump.c:258
Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844
CPU: 1 UID: 0 PID: 5844 Comm: kworker/u9:2 Not tainted
6.14.0-syzkaller-10892-g4e82c87058f4 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 02/12/2025
Workqueue: hci0 hci_devcd_timeout
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x23/0x60 mm/kasan/shadow.c:105
skb_put_data include/linux/skbuff.h:2752 [inline]
hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258
hci_devcd_timeout+0xb5/0x2e0 net/bluetooth/coredump.c:413
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The buggy address ffffc90004ed5000 belongs to a vmalloc virtual mapping
Memory state around the buggy address:
ffffc90004ed4f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed4f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90004ed5000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90004ed5080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed5100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
To avoid this issue, reorder dev_coredumpv to be called after
skb_put_data that does not free the data. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix the smbd_response slab to allow usercopy
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix oob access in cgroup local storage
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Correct signedness in skb remaining space calculation
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix potential out-of-bounds page table access during batched unmap
As pointed out by David[1], the batched unmap logic in
try_to_unmap_one() may read past the end of a PTE table when a large
folio's PTE mappings are not fully contained within a single page
table.
While this scenario might be rare, an issue triggerable from userspace
must be fixed regardless of its likelihood. This patch fixes the
out-of-bounds access by refactoring the logic into a new helper,
folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the
scan at both the VMA and PMD boundaries. To simplify the code, it also
supports partial batching (i.e., any number of pages from 1 up to the
calculated safe maximum), as there is no strong reason to special-case
for fully mapped folios. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
When num_parents is 4, __clk_register() occurs an out-of-bounds
when accessing parent_names member. Use ARRAY_SIZE() instead of
hardcode number here.
BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8
Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59
Hardware name: NXP i.MX95 19X19 board (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x8c/0xcc
print_report+0x398/0x5fc
kasan_report+0xd4/0x114
__asan_report_load8_noabort+0x20/0x2c
__clk_register+0x1844/0x20d8
clk_hw_register+0x44/0x110
__clk_hw_register_mux+0x284/0x3a8
imx95_bc_probe+0x4f4/0xa70 |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Avoid overflow with array index
The variable index is modified and reused as array index when modify
register EIOINTC_ENABLE. There will be array index overflow problem. |
| In the Linux kernel, the following vulnerability has been resolved:
software node: Correct a OOB check in software_node_get_reference_args()
software_node_get_reference_args() wants to get @index-th element, so
the property value requires at least '(index + 1) * sizeof(*ref)' bytes
but that can not be guaranteed by current OOB check, and may cause OOB
for malformed property.
Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'. |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_pciefd: refine error prone echo_skb_max handling logic
echo_skb_max should define the supported upper limit of echo_skb[]
allocated inside the netdevice's priv. The corresponding size value
provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT
which is 17.
But later echo_skb_max is rounded up to the nearest power of two (for the
max case, that would be 32) and the tx/ack indices calculated further
during tx/rx may exceed the upper array boundary. Kasan reported this for
the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit
function has actually caught the same thing earlier.
BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528
Read of size 8 at addr ffff888105e4f078 by task swapper/4/0
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary)
Call Trace:
<IRQ>
dump_stack_lvl lib/dump_stack.c:122
print_report mm/kasan/report.c:521
kasan_report mm/kasan/report.c:634
kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528
kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605
kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656
kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684
kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733
__handle_irq_event_percpu kernel/irq/handle.c:158
handle_irq_event kernel/irq/handle.c:210
handle_edge_irq kernel/irq/chip.c:833
__common_interrupt arch/x86/kernel/irq.c:296
common_interrupt arch/x86/kernel/irq.c:286
</IRQ>
Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq
numbers' generation that's not the case - we're free to calculate them as
would be more convenient, not taking tx max count into account. The only
downside is that the size of echo_skb[] should correspond to the max seq
number (not tx max count), so in some situations a bit more memory would
be consumed than could be.
Thus make the size of the underlying echo_skb[] sufficient for the rounded
max tx value.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
Fix the resetting of the subrequest iterator in netfs_retry_write_stream()
to use the iterator-reset function as the iterator may have been shortened
by a previous retry. In such a case, the amount of data to be written by
the subrequest is not "subreq->len" but "subreq->len -
subreq->transferred".
Without this, KASAN may see an error in iov_iter_revert():
BUG: KASAN: slab-out-of-bounds in iov_iter_revert lib/iov_iter.c:633 [inline]
BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611
Read of size 4 at addr ffff88802912a0b8 by task kworker/u32:7/1147
CPU: 1 UID: 0 PID: 1147 Comm: kworker/u32:7 Not tainted 6.15.0-rc6-syzkaller-00052-g9f35e33144ae #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: events_unbound netfs_write_collection_worker
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
iov_iter_revert lib/iov_iter.c:633 [inline]
iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611
netfs_retry_write_stream fs/netfs/write_retry.c:44 [inline]
netfs_retry_writes+0x166d/0x1a50 fs/netfs/write_retry.c:231
netfs_collect_write_results fs/netfs/write_collect.c:352 [inline]
netfs_write_collection_worker+0x23fd/0x3830 fs/netfs/write_collect.c:374
process_one_work+0x9cf/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net/mdiobus: Fix potential out-of-bounds clause 45 read/write access
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add locking for bcm_op runtime updates
The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via
hrtimer. The content and also the length of the sequence can be changed
resp reduced at runtime where the 'currframe' counter is then set to zero.
Although this appeared to be a safe operation the updates of 'currframe'
can be triggered from user space and hrtimer context in bcm_can_tx().
Anderson Nascimento created a proof of concept that triggered a KASAN
slab-out-of-bounds read access which can be prevented with a spin_lock_bh.
At the rework of bcm_can_tx() the 'count' variable has been moved into
the protected section as this variable can be modified from both contexts
too. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecdsa - Harden against integer overflows in DIV_ROUND_UP()
Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa
implementation's ->key_size() callback returns an unusually large value.
Herbert instead suggests (for a division by 8):
X / 8 + !!(X & 7)
Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and
use it in lieu of DIV_ROUND_UP() for ->key_size() return values.
Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes"
parameter is a ->key_size() return value in some instances, or a
user-specified ASN.1 length in the case of ecdsa_get_signature_rs(). |
