| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) an ROA or a Manifest containing a signedAttrs encoded in non-canonical form. This bypasses Fort's BER decoder, reaching a point in the code that panics when faced with data not encoded in DER. Because Fort is an RPKI Relying Party, a panic can lead to Route Origin Validation unavailability, which can lead to compromised routing. |
| Cacti is an open source performance and fault management framework. An admin user can create a device with a malicious hostname containing php code and repeat the installation process (completing only step 5 of the installation process is enough, no need to complete the steps before or after it) to use a php file as the cacti log file. After having the malicious hostname end up in the logs (log poisoning), one can simply go to the log file url to execute commands to achieve RCE. This issue has been addressed in version 1.2.28 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Cacti is an open source performance and fault management framework. The `fileurl` parameter is not properly sanitized when saving external links in `links.php` . Morever, the said fileurl is placed in some html code which is passed to the `print` function in `link.php` and `index.php`, finally leading to stored XSS. Users with the privilege to create external links can manipulate the `fileurl` parameter in the http post request while creating external links to perform stored XSS attacks. The vulnerability known as XSS (Cross-Site Scripting) occurs when an application allows untrusted user input to be displayed on a web page without proper validation or escaping. This issue has been addressed in release version 1.2.28. All users are advised to upgrade. There are no known workarounds for this issue. |
| In resizeToAtLeast of SkRegion.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: xmit: make sure we have at least eth header len bytes
syzbot triggered an uninit value[1] error in bridge device's xmit path
by sending a short (less than ETH_HLEN bytes) skb. To fix it check if
we can actually pull that amount instead of assuming.
Tested with dropwatch:
drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3)
origin: software
timestamp: Mon May 13 11:31:53 2024 778214037 nsec
protocol: 0x88a8
length: 2
original length: 2
drop reason: PKT_TOO_SMALL
[1]
BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
__bpf_tx_skb net/core/filter.c:2136 [inline]
__bpf_redirect_common net/core/filter.c:2180 [inline]
__bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187
____bpf_clone_redirect net/core/filter.c:2460 [inline]
bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238
bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
__bpf_prog_run include/linux/filter.h:657 [inline]
bpf_prog_run include/linux/filter.h:664 [inline]
bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425
bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058
bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678
__do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
__x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765
x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Improper Input Validation vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.5.
Users are recommended to upgrade to version 9.2.6, which fixes the issue, or 10.0.2, which does not have the issue. |
| Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue.
Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: cdev: Fix use after free in lineinfo_changed_notify
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain. |
| libmodbus v3.1.6 was discovered to contain a use-after-free via the ctx->backend pointer. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. |
| libmodbus v3.1.6 was discovered to contain a heap overflow via the modbus_mapping_free() function. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix not validating setsockopt user input
Check user input length before copying data. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to a possible `NULL` access and crash. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based based clients using `/bpp:32` legacy `GDI` drawing path with a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, use modern drawing paths (e.g. `/rfx` or `/gfx` options). The workaround requires server side support. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients that use a version of FreeRDP prior to 3.5.0 or 2.11.6 and have connections to servers using the `NSC` codec are vulnerable to integer underflow. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, do not use the NSC codec (e.g. use `-nsc`). |
| aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. In affected versions an attacker can send a specially crafted POST (multipart/form-data) request. When the aiohttp server processes it, the server will enter an infinite loop and be unable to process any further requests. An attacker can stop the application from serving requests after sending a single request. This issue has been addressed in version 3.9.4. Users are advised to upgrade. Users unable to upgrade may manually apply a patch to their systems. Please see the linked GHSA for instructions. |
| Improper input validation in UEFI firmware CseVariableStorageSmm for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper input validation in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fixed overflow check in mi_enum_attr() |
| Squid is a web proxy cache. Starting in version 3.5.27 and prior to version 6.8, Squid may be vulnerable to a Denial of Service attack against HTTP Chunked decoder due to an uncontrolled recursion bug. This problem allows a remote attacker to cause Denial of Service when sending a crafted, chunked, encoded HTTP Message. This bug is fixed in Squid version 6.8. In addition, patches addressing this problem for the stable releases can be found in Squid's patch archives. There is no workaround for this issue. |
