| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: validate virtqueue index in mmap and fault paths
vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a
virtqueue index for get_vq_notification(), but they do not validate
that the index is smaller than v->nvqs.
The ioctl path already performs both a bounds check and
array_index_nospec(), but the mmap/fault path only checks that the
index fits in u16. This allows an out-of-range queue index to reach
driver-specific get_vq_notification() callbacks.
Fix this by extracting a unified vhost_vdpa_get_vq_notification()
helper that validates the queue index against v->nvqs and applies
array_index_nospec() before calling the driver callback. Both the
mmap and fault paths use this helper, and the bounds checking is
consolidated into a single location.
From source inspection, the most defensible impact is out-of-bounds
access in the callback path, potentially leading to invalid PFN
remaps and crash/DoS. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Tighten cgroup storage cookie checks for prog arrays
The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local
storage") is still incomplete. The prog-array compatibility check
treats a program with no cgroup storage as compatible with any stored
storage cookie. This allows a storage-less program to bridge a tail
call chain between an entry program and a storage-using callee even
though cgroup local storage at runtime still follows the caller's
context, that is, A -> B(no storage) -> C(storage) path.
Requiring exact cookie equality would break the legitimate case of a
storage-less leaf program being tail called from a storage-using one.
Instead, only accept a zero storage cookie if the program cannot
perform tail calls itself. This keeps A -> B(no storage) working
while rejecting the A -> B(no storage) -> C(storage) bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded address parameter length
sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP,
and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct
sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer
parameter is large enough to contain an embedded address parameter header,
but does not verify that the embedded address parameter's declared length
fits within the bounds of the outer parameter.
Later, sctp_process_param() and sctp_process_asconf_param() extract the
embedded address parameter and pass it to af->from_addr_param(), which uses
the address parameter length to parse the variable-length address payload.
A malformed peer can therefore advertise an embedded address parameter
length that exceeds the remaining bytes in the enclosing parameter.
Validate that addr_param->p.length does not exceed the space available
after the sctp_addip_param header before processing the embedded address
parameter. Reject malformed parameters when the embedded address length
extends beyond the enclosing parameter bounds.
This prevents out-of-bounds reads when parsing malformed parameters carried
in INIT or ASCONF processing paths. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: require net admin for TIPCv2 netlink mutators
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clear sock_ops cb flags before force-closing a child socket
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
start and len are u32, so
u64 last = start + len;
evaluates start + len in 32-bit and wraps before storing it in last.
The bounds check
if (start >= offset + l || last > msg->sg.size)
return -EINVAL;
can then be passed with an out-of-range start/len, after which the pop
loop runs off the end of the scatterlist and sk_msg_shift_left() calls
put_page() on the empty msg->sg.end slot:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline]
RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline]
RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984
Call Trace:
<TASK>
bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8
bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746
sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934
tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline]
tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583
__sock_sendmsg+0x153/0x1c0 net/socket.c:802
__sys_sendto+0x326/0x430 net/socket.c:2265
__x64_sys_sendto+0xe3/0x100 net/socket.c:2268
do_syscall_64+0x14c/0x480
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Widen the addition with a (u64) cast so the bound is evaluated in
64-bit and a len near U32_MAX no longer wraps below msg->sg.size.
While here, change pop from int to u32. It counts bytes against the
unsigned scatterlist lengths and can never be negative, so the signed
type only invites sign-confusion in the pop loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix race condition on rdma->state in trans_rdma.c
The rdma->state field is modified without holding req_lock in both
recv_done() and p9_cm_event_handler(), while rdma_request() accesses
the same field under the req_lock spinlock. This inconsistent locking
creates a race condition:
- recv_done() running in softirq completion context sets
rdma->state = P9_RDMA_FLUSHING without acquiring req_lock
- p9_cm_event_handler() modifies rdma->state at multiple points
(ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without
req_lock
- rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to
protect the read-modify-write of rdma->state
The race can cause lost state transitions: recv_done() or the CM
event handler could set state to FLUSHING/CLOSED while rdma_request()
is concurrently checking or modifying state under the lock, leading to
the FLUSHING transition being silently overwritten by CLOSING. This
corrupts the connection state machine and can cause use-after-free on
RDMA request objects during teardown.
Fix by adding req_lock protection to all rdma->state modifications in
recv_done() and p9_cm_event_handler(), matching the pattern already
used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore
in the CM event handler since it can race with recv_done() which runs
in softirq context.
Tested with a kernel module that races two threads (simulating
rdma_request and recv_done/CM handler) on rdma->state with proper
locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost
transitions. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: add bounds check to run_get_highest_vcn()
run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without
any length bound, relying solely on a 0x00 terminator to stop. A
crafted $LogFile UpdateMappingPairs record whose embedded attribute
contains mapping-pairs runs without a terminator causes the function to
read past the slab allocation, triggering a KASAN slab-out-of-bounds
read on mount.
The sibling function run_unpack() received an analogous bounds-check in
commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"),
but run_get_highest_vcn() was missed.
Take a run_buf_size parameter and reject any run header whose payload
would extend past the buffer end, mirroring the pattern used by
run_unpack(). The caller in fslog.c passes the remaining attribute
bytes after the mapping-pairs offset.
KASAN report (on mainline v7.1 merge window HEAD):
BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410
Read of size 1 at addr ffff88800e2d5400 by task mount/72
Call Trace:
run_get_highest_vcn+0x3c0/0x410
do_action.isra.0+0x3ba8/0x7b50
log_replay+0x9ddd/0x10200
ntfs_loadlog_and_replay+0x4ad/0x610
ntfs_fill_super+0x214a/0x4540 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix bcall rep leak and unbounded peek
rpcrdma_is_bcall() decodes a reply's first words to decide whether
the frame is a backchannel call. Two issues in that decode path
let a short or malformed reply leak the receive buffer and drain
the Receive queue.
First, the speculative peek
p = xdr_inline_decode(xdr, 0);
/* five p++ reads follow */
asks xdr_inline_decode() for zero bytes, which returns xdr->p
without consulting xdr->end. The five subsequent __be32 reads can
then walk up to 20 bytes past the wire payload into stale regbuf
contents and misclassify the reply as a backchannel call.
Second, after the post-peek
p = xdr_inline_decode(xdr, 3 * sizeof(*p));
if (unlikely(!p))
return true;
the short-header arm returns true without calling
rpcrdma_bc_receive_call(). The contract with the caller is that a
true return transfers ownership of rep to the backchannel path:
rpcrdma_reply_handler()
if (rpcrdma_is_bcall(r_xprt, rep))
return; /* bare return, skips out_post */
...
out_post:
rpcrdma_post_recvs(r_xprt, credits + ...);
Because rpcrdma_bc_receive_call() never ran, no one took rep, but
rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put()
and rpcrdma_post_recvs(). The rep, with its persistently
DMA-mapped receive buffer, is orphaned on rb_all_reps and freed
only at transport teardown. This completion reposts nothing, so
its slot is reclaimed only when a later forward-channel reply
reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to
backfill; absent that traffic the Receive queue drains and the
peer's Sends draw RNR NAKs.
Fix by consulting xdr->end after the zero-length peek so the five
__be32 reads cannot run unless 20 bytes of wire payload remain. A
byte-precise comparison against xdr->end is required because a
non-4-aligned receive rounds the stream's word count up past the
true payload. Also return false from the short-header arm so the
reply falls through the normal out_norqst cleanup chain
(rpcrdma_rep_put() plus rpcrdma_post_recvs()). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate selector family and prefixlen during match
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: make sure gc is properly stopped
Sashiko noticed that when destroying a set,
cancel_delayed_work_sync() was called while gc
calls queue_delayed_work() unconditionally which
can lead not to properly shutting down the gc. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init()
We ran into below KASAN splat, which is mostly uninteresting, beside
for having nf_nat_register_fn() in the call chain as a cause for the
offending access:
==================================================================
BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640
Read of size 8 at addr ffff890031e54c20 by task iptables/9510
CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
[…] dump_stack_lvl+0xee/0x160 ffff88004117eeb8
[…] print_report+0x6e/0x640 ffff88004117eee0
[…] ? __phys_addr+0x8e/0x140 ffff88004117eef0
[…] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08
[…] ? complete_report_info+0xec/0x1c0 ffff88004117ef20
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48
[…] kasan_report+0xbc/0x140 ffff88004117ef50
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90
[…] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8
[…] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070
[…] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080
[…] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8
[…] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130
[…] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190
[…] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8
[…] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310
[…] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358
[…] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360
[…] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488
[…] ? lock_acquire+0x16f/0x320 ffff88004117f490
[…] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0
[…] ? __nla_parse+0x45/0x80 ffff88004117f500
[…] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550
[…] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618
[…] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720
[…] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8
[…] ? gr_is_capable+0x6f/0xe0 ffff88004117f830
[…] ? __nla_parse+0x45/0x80 ffff88004117f860
[…] ? skb_pull+0x103/0x1a0 ffff88004117f880
[…] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0
[…] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8
[…] ? netlink_lookup+0xe2/0x240 ffff88004117f900
[…] netlink_unicast+0x74b/0xb00 ffff88004117f930
[…] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980
[…] ? __check_object_size+0x3e/0xaa0 ffff88004117f998
[…] ? security_netlink_send+0x51/0x160 ffff88004117f9c8
[…] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8
[…] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8
[…] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00
[…] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60
[…] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8
[…] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8
[…] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30
[…] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd20
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd58
[…] ? find_held_lock+0x3b/0xe0 ffff88004117fd70
[…] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8
[…] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0
[…] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98
[…] do_syscall_64+0x7d/0x400 ffff88004117fec8
[…] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8
</TASK>
==================================================================
The out-of-bounds report, though, is a red herring as it is f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ge_put_enum_double() passes the user-supplied enumeration index
item[0] to snd_soc_enum_item_to_val() without checking it against the
number of items in the enum:
ret = snd_soc_enum_item_to_val(e, item[0]);
snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array
with that index (e->values is set from a devm_kcalloc() of e->items
entries), so a control write with an out-of-range item[0] reads past the
end of the values buffer. The bounds check in
snd_soc_dapm_put_enum_double() only runs afterwards, so it does not
prevent the read here.
Reject an out-of-range item before using it, matching the other enum put
handlers.
This issue was pointed out by the Sashiko AI review bot while reviewing a
related enum-validation series:
https://lore.kernel.org/all/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: validate SRH length before reading fixed fields
seg6_validate_srh() reads fixed SRH fields such as srh->type and
srh->hdrlen before checking that the supplied length covers the fixed
struct ipv6_sr_hdr fields.
The BPF SEG6 encap path reaches this with a BPF program-supplied pointer
and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and
END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the
length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6
encap header can therefore make the validator read srh->type at offset 2
beyond the caller-supplied buffer.
Reject lengths shorter than the fixed SRH at the top of
seg6_validate_srh(), before any field is read. This fixes the BPF helper
path and keeps the common validator robust. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: stp: Fix a potential use-after-free when deleting a bridge
The three STP timers are not supposed to be armed while the bridge is
administratively down. They are synchronously deactivated when the
bridge is put administratively down and the various call sites check for
'IFF_UP' before arming them.
This check is missing from br_topology_change_detection() and it is
possible to engineer a situation in which the topology change timer is
armed while the bridge is administratively down, resulting in a
use-after-free [1] when the bridge is deleted.
Fix by adding the missing check and for good measures synchronously
shutdown the three timers when the bridge is deleted.
[1]
ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 |
