| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on irq uninstall
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525104/ |
| Unrestricted Upload of File with Dangerous Type vulnerability in Echo Call Center Services Trade and Industry Inc. Specto CM allows Remote Code Inclusion.This issue affects Specto CM: before 17032025. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Echo Call Center Services Trade and Industry Inc. Specto CM allows Stored XSS.This issue affects Specto CM: before 17032025. |
| Beward Intercom 2.3.1 contains a credentials disclosure vulnerability that allows local attackers to access plain-text authentication credentials stored in an unencrypted database file. Attackers can read the BEWARD.INTERCOM.FDB file to extract usernames and passwords, enabling unauthorized access to IP cameras and door stations. |
| ONLYOFFICE Docs before 9.2.1 allows XSS in the textarea of the comment editing form. This is related to DocumentServer. |
| Legrand BTicino Driver Manager F454 1.0.51 contains multiple web vulnerabilities that allow attackers to perform administrative actions without proper request validation. Attackers can exploit cross-site request forgery to change passwords and inject stored cross-site scripting payloads through unvalidated GET parameters. |
| V-SOL GPON/EPON OLT Platform 2.03 contains an unauthenticated information disclosure vulnerability that allows attackers to download configuration files via direct object reference. Attackers can retrieve sensitive configuration data by sending HTTP GET requests to the usrcfg.conf endpoint, potentially enabling authentication bypass and system access. |
| SmartHouse Webapp 6.5.33 contains multiple cross-site request forgery and cross-site scripting vulnerabilities that allow attackers to perform unauthorized actions. Attackers can exploit these vulnerabilities by tricking logged-in users into visiting malicious websites or injecting malicious scripts into various application parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid(). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sprd: Fix DMA buffer leak issue
Release DMA buffer when _probe() returns failure to avoid memory leak. |
| SOCA Access Control System 180612 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without proper request validation. Attackers can craft malicious web pages that submit forged requests to create admin accounts by tricking logged-in users into visiting a malicious site. |
| SOCA Access Control System 180612 contains multiple insecure direct object reference vulnerabilities that allow attackers to access sensitive user credentials. Attackers can retrieve authenticated and unauthenticated user password hashes and pins through unprotected endpoints like Get_Permissions_From_DB.php and Ac10_ReadSortCard. |
| Leica Geosystems GR10/GR25/GR30/GR50 GNSS 4.30.063 contains a stored cross-site scripting vulnerability in the configuration file upload functionality. Attackers can upload a malicious HTML file to that executes arbitrary JavaScript in a user's browser session when viewed. |
| NovaRad NovaPACS Diagnostics Viewer 8.5.19.75 contains an unauthenticated XML External Entity (XXE) injection vulnerability in XML preference import settings. Attackers can craft malicious XML files with DTD parameter entities to retrieve arbitrary system files through an out-of-band channel attack. |
| iSeeQ Hybrid DVR WH-H4 1.03R contains an unauthenticated vulnerability in the get_jpeg script that allows unauthorized access to live video streams. Attackers can retrieve video snapshots from specific camera channels by sending requests to the /cgi-bin/get_jpeg endpoint without authentication. |
| V-SOL GPON/EPON OLT Platform v2.03 contains a privilege escalation vulnerability that allows normal users to gain administrative access by manipulating the user role parameter. Attackers can send a crafted HTTP POST request to the user management endpoint with 'user_role_mod' set to integer value '1' to elevate their privileges. |
| V-SOL GPON/EPON OLT Platform 2.03 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without user consent. Attackers can craft malicious web pages to create admin users, enable SSH, or modify system settings by tricking authenticated administrators into loading a specially crafted page. |
| Ross Video DashBoard 8.5.1 contains an elevation of privileges vulnerability that allows authenticated users to modify executable files due to improper permission settings. Attackers can exploit the 'M' or 'C' flags for 'Authenticated Users' group to replace the DashBoard.exe binary with a malicious executable. |
| Beward N100 H.264 VGA IP Camera M2.1.6 contains an authenticated file disclosure vulnerability that allows attackers to read arbitrary system files via the 'READ.filePath' parameter. Attackers can exploit the fileread script or SendCGICMD API to access sensitive files like /etc/passwd and /etc/issue by supplying absolute file paths. |
