| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web framework of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface. Affected Products: Cisco Firepower Management Center Releases 5.4.1.x and prior. More Information: CSCuy88951. Known Affected Releases: 5.4.1.6. |
| A vulnerability in the AutoVNF automation tool of the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to acquire sensitive information. The vulnerability is due to insufficient protection of sensitive data. An attacker could exploit this vulnerability by browsing to a specific URL of an affected device. An exploit could allow the attacker to view sensitive configuration information about the deployment. Cisco Bug IDs: CSCvd29358. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation during the installation of a software patch. An attacker could exploit this vulnerability by installing a crafted patch image with the vulnerable operation occurring prior to patch activation. An exploit could allow the attacker to execute arbitrary commands on an affected system as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf23735, CSCvg04072. |
| A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189. |
| A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675. |
| A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069. |
| A vulnerability in the Cisco Prime Infrastructure (PI) and Evolved Programmable Network Manager (EPNM) SQL database interface could allow an authenticated, remote attacker to impact the confidentiality and integrity of the application by executing arbitrary SQL queries, aka SQL Injection. More Information: CSCvc23892 CSCvc35270 CSCvc35626 CSCvc35630 CSCvc49568. Known Affected Releases: 3.1(1) 2.0(4.0.45B). |
| A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803. |
| A vulnerability in the web-based GUI of Cisco Unified Communications Domain Manager could allow an unauthenticated, remote attacker to redirect a user to a malicious web page, aka an Open Redirect issue. More Information: CSCvc54813. Known Affected Releases: 8.1(7)ER1. |
| A vulnerability in the web interface of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to access sensitive Virtual Temporary Directory information on an affected system. The vulnerability exists because the affected software does not sufficiently protect sensitive data when responding to HTTP requests that are sent to the web interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web interface of the software on an affected system. A successful exploit could allow the attacker to access sensitive information about the software. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvc52861. |
| A vulnerability in SNMP polling for the Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to discover confidential information about the appliances that should be available only to an administrative user. The vulnerability occurs because the appliances do not protect confidential information at rest in response to Simple Network Management Protocol (SNMP) poll requests. An attacker could exploit this vulnerability by doing a crafted SNMP poll request to the targeted security appliance. An exploit could allow the attacker to discover confidential information that should be restricted, and the attacker could use this information to conduct additional reconnaissance. The attacker must know the configured SNMP community string to exploit this vulnerability. Cisco Bug IDs: CSCve26106, CSCve26202, CSCve26224. Known Affected Releases: 10.0.0-230 (Web Security Appliance), 9.7.2-065 (Email Security Appliance), and 10.1.0-037 (Content Security Management Appliance). |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies. |
| A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to access sensitive information or execute arbitrary code with root privileges on an affected system. The vulnerability is due to the lack of authentication and authorization mechanisms for a debugging tool that was inadvertently enabled in the affected software. An attacker could exploit this vulnerability by remotely connecting to the debugging tool via TCP. A successful exploit could allow the attacker to access sensitive information about the affected software or execute arbitrary code with root privileges on the affected system. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software Releases 10.1(1) and 10.1(2) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd09961. |
| A vulnerability in the web interface of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to access sensitive Order information on an affected system. The vulnerability exists because the affected software does not sufficiently protect sensitive data when responding to HTTP requests that are sent to the web interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web interface of the software on an affected system. A successful exploit could allow the attacker to access sensitive information about the software. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvc52866 CSCvc52868. |
| A vulnerability in certain filtering mechanisms of access control lists (ACLs) for Cisco ASR 5000 Series Aggregation Services Routers through 21.x could allow an unauthenticated, remote attacker to bypass ACL rules that have been configured for an affected device. More Information: CSCvb99022 CSCvc16964 CSCvc37351 CSCvc54843 CSCvc63444 CSCvc77815 CSCvc88658 CSCve08955 CSCve14141 CSCve33870. |
| A vulnerability in the web interface of Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to insufficient protection of sensitive data when responding to an HTTP request on the web interface. An attacker could exploit the vulnerability by sending a crafted HTTP request to the application to access specific system files. An exploit could allow the attacker to obtain sensitive information about the application which could include user credentials. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases 10.6 through 11.5. Cisco Bug IDs: CSCvc99626. |
| A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457. |
| A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366. |
