| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains TeamCity before 2026.2 privilege escalation to system administrator was possible via project administrator roles in simple authorization mode |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the Triggers page was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the Build Features page was possible |
| In JetBrains TeamCity before 2026.2.1 stored XSS in the Issue Trackers health report was possible |
| In JetBrains TeamCity before 2026.2.1 stored XSS in the Maven Build Info project header was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS in the Commit Status Publisher settings was possible |
| In JetBrains TeamCity before 2026.2.1 missing authorization allowed reading VCS file contents and patches of other projects |
| In JetBrains TeamCity before 2026.2.1 stored XSS in recipe export errors was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS on the thread dump page was possible |
| In JetBrains TeamCity before 2026.2.1 improper authorization allowed using AWS connections of other projects in cloud profiles |
| In JetBrains TeamCity before 2026.2.1 stored XSS in the Pull Requests health report for VCS roots was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored and reflected XSS in Space project connection dialogs was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS in the JaCoCo coverage settings was possible |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Tomdever wpForo Forum wpforo allows Stored XSS.This issue affects wpForo Forum: from n/a through 3.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Bus Lock VM exit
Enable Bus Lock VM exit functionality for TDX guests.
Bus Lock VM exit is an existing feature supported by KVM. Userspace can
enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's
reported as supported. However, KVM reports the support of this CAP
just based on the hardware capability but doesn't differentiate between
VMX and TDX. This leads to the issue that userspace can enable this cap
for TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Bus Lock VM exit for TDX guests by programming the
BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler.
Note, there is no enumeration bit for this feature by TDX module because
all TDX modules support it and allow to set the TD VMCS as long as the
hardware supports the feature. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Notify VM exit
Enable Notify VM exit functionality for TDX guests.
Notify VM exit is an existing feature supported by KVM. Userspace can
enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's
reported as supported. However, KVM reports the support of this CAP just
based on the hardware capability but doesn't differentiate between VMX
and TDX. This leads to the issue that userspace can enable this cap for
TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Notify VM exit for TDX guests by:
- Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify
Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS
bits are set. Since TDX vCPU cannot be reset, it only needs to be
configured once when initializing the TDX vCPU.
- Adding corresponding exit handler for TDX Notify VM Exit.
Notify VM exit can happen when executing the IRET instruction. If the
IRET unblocks the NMI blocking state, bit 12 of the exit qualification
is set. In this case, the VMM needs to restore the "blocked by NMI" state
when it decides to re-enter the guest. For TDX, KVM cannot manage the
GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to
handle it. Extract the common part without NMI blocking handling into a
helper in common.h so that it can be shared between VMX and TDX.
Note, KVM uses "pre-production" terminology for the feature formally called
Notify VM-Exit. All public versions of the SDM refer to the feature as
Instruction Timeout. This will be remedied in the near future, for now,
use KVM's terminology for consistency.
Note, #2, there is no enumeration bit for Notify VM exit by TDX module
because all TDX modules support it, and allow to set the corresponding
TD VMCS fields as long as the hardware supports the feature. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak
Ensure all reserved flags are zeroed when setting the msg_pending flag as
part of SynIC message delivery, as setting only msg_pending can leak seven
bits of kernel stack data to the guest. E.g. gcc typically uses a
bitwise-OR to set the msg_pending flag, without initializing the on-stack
variable.
Precisely zero the flags, e.g. as opposed to zeroing the entire structure,
to make it somewhat more obvious that the flags *need* to be zeroed. E.g.
it would be quite easy to misread the initial read of guest memory and
think that zeroing the entire structure is completely superfluous. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Take SRCU in kvm_zap_gfn_range()
kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to
reschedule. Callers that do not already hold kvm->srcu (or slots_lock)
can race with memslot deletion: synchronize_srcu_expedited() does not
wait, kvm_free_memslot() frees the old slot and its rmap, and the zap
resumes on freed memory.
The VFIO noncoherent-DMA path hits this by zapping the entire GPA
space without SRCU. KASAN reported:
BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0
Read of size 8 at addr ffffc900005c1008
Call Trace:
slot_rmap_walk_next+0x82/0x1c0
__kvm_rmap_zap_gfn_range+0x17a/0x280
kvm_zap_gfn_range+0x2a6/0x6a0
kvm_vfio_set_attr+0x576/0x770
kvm_device_ioctl+0x1ff/0x3b0
Take SRCU inside kvm_zap_gfn_range() so every caller is covered.
Nesting with an existing kvm->srcu critical section is fine; the
helper uses a local index. Drop the now-redundant SRCU pair from
__kvm_set_or_clear_apicv_inhibit(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Request event processing for exception VM-Exits
Request event processing whenever kvm_queue_exception_vmexit() queues an
exception VM-Exit. Most callers reach the helper through
kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested
asynchronous page faults call it directly.
Without another event request, vcpu_enter_guest() skips
kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can
clear the pending exception while reconstructing vectoring state, losing
the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a
later regular #PF can consume the stale value.
Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the
queued VM-Exit before KVM re-enters L2. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration
Xen's map_guest_area() enforces that vcpu_info is aligned to
sizeof(xen_ulong_t). KVM has no such check, allowing a guest to
register vcpu_info at an arbitrary byte alignment.
Enforce unconditional 4-byte alignment regardless of the current
shinfo mode. This is sufficient because subsequent commits ensure
that all locked atomic operations on vcpu_info fields use at most
32-bit accesses. Return -ENXIO on failure, matching Xen's
map_guest_area() behaviour for unaligned requests.
Originally observed in review of an unrelated patch:
https://lore.kernel.org/all/[email protected]/ |