| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.36, improper neutralization of special elements in an LDAP query in ApacheAuthenticate.php allows LDAP injection via an unsanitized username value when ApacheAuthenticate.apacheEnv is configured to use a user-controlled server variable instead of REMOTE_USER (such as in certain proxy setups). An attacker able to control that value can manipulate the LDAP search filter and potentially bypass authentication constraints or cause unauthorized LDAP queries. This vulnerability is fixed in 2.5.36. |
| An authenticated user with the read role may read limited amounts of uninitialized stack memory via specially-crafted issuances of the filemd5 command. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
In protected mode, the hypervisor maintains a separate instance of
the `kvm` structure for each VM. For non-protected VMs, this structure is
initialized from the host's `kvm` state.
Currently, `pkvm_init_features_from_host()` copies the
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the
underlying `id_regs` data being initialized. This results in the
hypervisor seeing the flag as set while the ID registers remain zeroed.
Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for
non-protected VMs. This breaks logic that relies on feature detection,
such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain
system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not
saved/restored during the world switch, which could lead to state
corruption.
Fix this by explicitly copying the ID registers from the host `kvm` to
the hypervisor `kvm` for non-protected VMs during initialization, since
we trust the host with its non-protected guests' features. Also ensure
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in
`pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly
initialize them and set the flag once done. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Fix kernel stack leak in ionic_create_cq()
struct ionic_cq_resp resp {
__u32 cqid[2]; // offset 0 - PARTIALLY SET (see below)
__u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask)
__u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK
};
rsvd[7]: 7 bytes of stack memory leaked unconditionally.
cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices
where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but
udma_count could be 1, meaning cqid[1] might never be written via
ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4
bytes) is also leaked. So potentially 11 bytes leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
fork: defer linking file vma until vma is fully initialized
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, sensitive information from heap memory may be leaked through the decoded pixel data (information disclosure). This occurs under default settings; simply reading a malicious EXR file is sufficient to trigger the issue, without any user interaction. This issue has been patched in version 3.4.8. |
| The Active Directory Integration / LDAP Integration plugin for WordPress is vulnerable to LDAP Injection in versions up to, and including, 4.1.5. This is due to insufficient escaping on the supplied username value. This makes it possible for attackers, with an existing account on a vulnerable WordPress instance, to extract potentially sensitive information from the LDAP directory. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Allow UD qp_type to join multicast only
As for multicast:
- The SIDR is the only mode that makes sense;
- Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is
UD compatible. In this case qkey also needs to be set [1].
This patch allows only UD qp_type to join multicast, and set qkey to
default if it's not set, to fix an uninit-value error: the ib->rec.qkey
field is accessed without being initialized.
=====================================================
BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline]
rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546
ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732
vfs_write+0x8ce/0x2030 fs/read_write.c:588
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
__do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Local variable ib.i created at:
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline]
rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
[1] https://lore.kernel.org/linux-rdma/[email protected]/ |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in Safari 26.2, iOS 26.2 and iPadOS 26.2, macOS Tahoe 26.2, tvOS 26.2, visionOS 26.2, watchOS 26.2. Processing maliciously crafted web content may disclose internal states of the app. |
| If auth_username_chars is empty, it is possible to inject arbitrary LDAP filter to Dovecot's LDAP authentication. This leads to potentially bypassing restrictions and allows probing of LDAP structure. Do not clear out auth_username_chars, or install fixed version. No publicly available exploits are known. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.22, 2.9.3, and 2.10.1, an authenticated user with permission to create or modify workflows could use the JavaScript Task Runner to allocate uninitialized memory buffers. Uninitialized buffers may contain residual data from the same Node.js process — including data from prior requests, tasks, secrets, or tokens — resulting in information disclosure of sensitive in-process data. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. In external runner mode, the impact is limited to data within the external runner process. The issue has been fixed in n8n versions 1.123.22, 2.10.1 , and 2.9.3. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to isolate the runner process. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, a flaw in the LDAP node's filter escape logic allowed LDAP metacharacters to pass through unescaped when user-controlled input was interpolated into LDAP search filters. In workflows where external user input is passed via expressions into the LDAP node's search parameters, an attacker could manipulate the constructed filter to retrieve unintended LDAP records or bypass authentication checks implemented in the workflow. Exploitation requires a specific workflow configuration. The LDAP node must be used with user-controlled input passed via expressions (e.g., from a form or webhook). The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the LDAP node by adding `n8n-nodes-base.ldap` to the `NODES_EXCLUDE` environment variable, and/or avoid passing unvalidated external user input into LDAP node search parameters via expressions. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| ITS dissector crash in Wireshark 4.4.0 allows denial of service via packet injection or crafted capture file |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - zero initialize memory allocated via sock_kmalloc
Several crypto user API contexts and requests allocated with
sock_kmalloc() were left uninitialized, relying on callers to
set fields explicitly. This resulted in the use of uninitialized
data in certain error paths or when new fields are added in the
future.
The ACVP patches also contain two user-space interface files:
algif_kpp.c and algif_akcipher.c. These too rely on proper
initialization of their context structures.
A particular issue has been observed with the newly added
'inflight' variable introduced in af_alg_ctx by commit:
67b164a871af ("crypto: af_alg - Disallow multiple in-flight AIO requests")
Because the context is not memset to zero after allocation,
the inflight variable has contained garbage values. As a result,
af_alg_alloc_areq() has incorrectly returned -EBUSY randomly when
the garbage value was interpreted as true:
https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209
The check directly tests ctx->inflight without explicitly
comparing against true/false. Since inflight is only ever set to
true or false later, an uninitialized value has triggered
-EBUSY failures. Zero-initializing memory allocated with
sock_kmalloc() ensures inflight and other fields start in a known
state, removing random issues caused by uninitialized data. |
| In the Linux kernel, the following vulnerability has been resolved:
um: init cpu_tasks[] earlier
This is currently done in uml_finishsetup(), but e.g. with
KCOV enabled we'll crash because some init code can call
into e.g. memparse(), which has coverage annotations, and
then the checks in check_kcov_mode() crash because current
is NULL.
Simply initialize the cpu_tasks[] array statically, which
fixes the crash. For the later SMP work, it seems to have
not really caused any problems yet, but initialize all of
the entries anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctly
The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a
LS_NLA_TYPE_DGID attribute, it is invalid if it does not.
Use the nl parsing logic properly and call nla_parse_deprecated() to fill
the nlattrs array and then directly index that array to get the data for
the DGID. Just fail if it is NULL.
Remove the for loop searching for the nla, and squash the validation and
parsing into one function.
Fixes an uninitialized read from the stack triggered by userspace if it
does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE
query.
BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline]
BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
hex_byte_pack include/linux/hex.h:13 [inline]
ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509
ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633
pointer+0xc09/0x1bd0 lib/vsprintf.c:2542
vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930
vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279
vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426
vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465
vprintk+0x36/0x50 kernel/printk/printk_safe.c:82
_printk+0x17e/0x1b0 kernel/printk/printk.c:2475
ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline]
ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x333/0x3d0 net/socket.c:729
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617
___sys_sendmsg+0x271/0x3b0 net/socket.c:2671
__sys_sendmsg+0x1aa/0x300 net/socket.c:2703
__compat_sys_sendmsg net/compat.c:346 [inline]
__do_compat_sys_sendmsg net/compat.c:353 [inline]
__se_compat_sys_sendmsg net/compat.c:350 [inline]
__ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350
ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3 |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to versions 7.15.1 and 8.9.3, an LDAP Injection vulnerability exists in the SuiteCRM authentication flow. The application fails to properly sanitize user-supplied input before embedding it into the LDAP search filter. By injecting LDAP control characters, an unauthenticated attacker can manipulate the query logic, which can lead to authentication bypass or information disclosure. Versions 7.15.1 and 8.9.3 patch the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix deinitialization of firmware resources
Currently, in ath11k_ahb_fw_resources_init(), iommu domain
mapping is done only for the chipsets having fixed firmware
memory. Also, for such chipsets, mapping is done only if it
does not have TrustZone support.
During deinitialization, only if TrustZone support is not there,
iommu is unmapped back. However, for non fixed firmware memory
chipsets, TrustZone support is not there and this makes the
condition check to true and it tries to unmap the memory which
was not mapped during initialization.
This leads to the following trace -
[ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers
.. snip ..
[ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 83.287228] pc : __iommu_unmap+0x30/0x140
[ 83.293907] lr : iommu_unmap+0x5c/0xa4
[ 83.298072] sp : ffff80000b3abad0
.. snip ..
[ 83.369175] Call trace:
[ 83.376282] __iommu_unmap+0x30/0x140
[ 83.378541] iommu_unmap+0x5c/0xa4
[ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb]
[ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb]
[ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb]
[ 83.398248] platform_shutdown+0x20/0x2c
[ 83.403455] device_shutdown+0x16c/0x1c4
[ 83.407621] kernel_restart_prepare+0x34/0x3c
[ 83.411529] kernel_restart+0x14/0x74
[ 83.415781] __do_sys_reboot+0x1c4/0x22c
[ 83.419427] __arm64_sys_reboot+0x1c/0x24
[ 83.423420] invoke_syscall+0x44/0xfc
[ 83.427326] el0_svc_common.constprop.3+0xac/0xe8
[ 83.430974] do_el0_svc+0xa0/0xa8
[ 83.435659] el0_svc+0x1c/0x44
[ 83.438957] el0t_64_sync_handler+0x60/0x144
[ 83.441910] el0t_64_sync+0x15c/0x160
[ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0)
[ 83.449903] ---[ end trace 0000000000000000 ]---
This can be reproduced by probing an AHB chipset which is not
having a fixed memory region. During reboot (or rmmod) trace
can be seen.
Fix this issue by adding a condition check on firmware fixed memory
hw_param as done in the counter initialization function.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
