| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ntpd in NTP 4.2.8p3 and NTPsec a5fb34b9cc89b92a8fef2f459004865c93bb7f92 relies on the underlying operating system to protect it from requests that impersonate reference clocks. Because reference clocks are treated like other peers and stored in the same structure, any packet with a source ip address of a reference clock (127.127.1.1 for example) that reaches the receive() function will match that reference clock's peer record and will be treated as a trusted peer. Any system that lacks the typical martian packet filtering which would block these packets is in danger of having its time controlled by an attacker. |
| An issue was discovered on the D-Link DWR-932B router. A secure_mode=no line exists in /var/miniupnpd.conf. |
| Huawei UAP2105 before V300R012C00SPC160(BootRom) does not require authentication to the serial port or the VxWorks shell. |
| Detection bypass vulnerability in Intel Security Advanced Threat Defense (ATD) 3.4.6 and earlier allows malware samples to bypass ATD detection via renaming the malware. |
| The Grandstream Wave app 1.0.1.26 and earlier for Android does not use HTTPS when retrieving update information, which might allow man-in-the-middle attackers to execute arbitrary code via a crafted application. |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
| Find My iPhone on iOS 2.0 through 3.1.3 for iPhone 3G and later and iOS 2.1 through 3.1.3 for iPod touch (2nd generation) and later, when Find My iPhone is disabled, allows remote authenticated users with an associated MobileMe account to wipe the device. |
| IBM BigFix Inventory v9 9.2 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 118853. |
| OpenDaylight Karaf 0.6.1-Carbon fails to clear the cache after a password change, allowing the old password to be used until the Karaf cache is manually cleared (e.g. via restart). |
| Vulnerability in the Oracle VM VirtualBox component of Oracle Virtualization (subcomponent: GUI). Supported versions that are affected are VirtualBox prior to 5.0.32 and prior to 5.1.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle VM VirtualBox accessible data as well as unauthorized read access to a subset of Oracle VM VirtualBox accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle VM VirtualBox. CVSS v3.0 Base Score 6.3 (Confidentiality, Integrity and Availability impacts). |
| Jenkins before 1.586 does not set the HttpOnly flag in a Set-Cookie header for session cookies when run on Tomcat 7.0.41 or later, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies. |
| Vulnerability in the Oracle FLEXCUBE Core Banking component of Oracle Financial Services Applications (subcomponent: Core). Supported versions that are affected are 5.1.0, 5.2.0 and 11.5.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle FLEXCUBE Core Banking. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle FLEXCUBE Core Banking accessible data. CVSS v3.0 Base Score 3.1 (Confidentiality impacts). |
| networking.c in Redis before 3.2.7 allows "Cross Protocol Scripting" because it lacks a check for POST and Host: strings, which are not valid in the Redis protocol (but commonly occur when an attack triggers an HTTP request to the Redis TCP port). |
| OpenNTPD before 6.0p1 does not validate the CN for HTTPS constraint requests, which allows remote attackers to bypass the man-in-the-middle mitigations via a crafted timestamp constraint with a valid certificate. |
| An issue was discovered in Sauter NovaWeb web HMI. The application uses a protection mechanism that relies on the existence or values of a cookie, but it does not properly ensure that the cookie is valid for the associated user. |
| The uglify-js package before 2.4.24 for Node.js does not properly account for non-boolean values when rewriting boolean expressions, which might allow attackers to bypass security mechanisms or possibly have unspecified other impact by leveraging improperly rewritten Javascript. |
| An issue was discovered in certain Apple products. iOS before 10.1 is affected. macOS before 10.12.1 is affected. The issue involves the "IDS - Connectivity" component, which allows man-in-the-middle attackers to spoof calls via a "switch caller" notification. |
| Seagate ST500LT015 hard disk drives, when operating in eDrive mode on Lenovo ThinkPad W541 laptops with BIOS 2.21, allow physically proximate attackers to bypass self-encrypting drive (SED) protection by attaching a second SATA connector to exposed pins, maintaining an alternate power source, and attaching the data cable to another machine, aka a "Hot Unplug Attack." |
| IBM WebSphere Message Broker 9.0 and 10.0 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. IBM Reference #: 1997906. |
| The wp_ajax_update_plugin function in wp-admin/includes/ajax-actions.php in WordPress before 4.6 makes a get_plugin_data call before checking the update_plugins capability, which allows remote authenticated users to bypass intended read-access restrictions via the plugin parameter to wp-admin/admin-ajax.php, a related issue to CVE-2016-6896. |
