| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in FastStone Image Viewer up to 8.3. This affects an unknown function of the file FSViewer.exe of the component TGA Image Handler. The manipulation results in out-of-bounds read. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer.
The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2).
An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact.
The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT get_signing_key_from_jwt is affected because unknown kid misses force refreshes without a negative cache or minimum refresh interval. This occurs when unauthenticated tokens repeatedly use the same unknown kid or varying kid values absent from the cached JWKS. As a result, each cache miss causes PyJWKClient to refresh the JWKS. Consequently, attacker traffic can amplify outbound requests to the configured JWKS endpoint. This issue is fixed in version 2.14.0. |
| The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value.
The path is reached from coap_well_known_core_get_len() and coap_well_known_core_get() via match_queries_resource(), i.e. by any unauthenticated GET /.well-known/core?href=/<prefix> request to a device that serves /.well-known/core (for the CoAP server subsystem, CONFIG_COAP_SERVER_WELL_KNOWN_CORE, default y) and has at least one resource that declares struct coap_core_metadata attributes.
The over-read does not reach the receive buffer. The well-known-core builders parse the query into a stack-local struct coap_option, whose value is a fixed array (value[12], or CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE bytes) that the option bytes are copied into, so uri points into that copy. Reading past len therefore reads the unused, uninitialized tail of the array and, when the option fills it, the bytes just past it in the same stack frame. (In the ZoAP library of v1.8.0 to v1.9.x the option value was instead a pointer into the received packet, and the over-read ran past the option inside the packet buffer.)
The impact is bounded. The number of bytes read past the end is limited by the length of the resource path segment, and each additional byte is only read if it happens to equal the next path character, so in practice the over-read is one byte. It also cannot influence the response: returning a match requires the final compared index to be len - 1 or len, both in bounds, so out-of-bounds bytes only ever steer the loop to the next candidate resource. The consequence is undefined behaviour, not information disclosure and not a matching error.
The fix adds a k >= len guard at the top of the inner loop, so every uri[k] dereference is within the option value while still allowing a trailing * wildcard to match a longer path. |
| @grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Prior to 1.13.6 and 1.14.5, getAuthContext does not distinguish authorized from unauthorized peer certificates when server credentials set requireClientCertificate to false. When applications use the returned authentication context, they can treat an unauthorized certificate as authorized, causing improper authentication. @grpc/grpc-js-xds can reach this condition when RBAC authentication is enabled in affected configurations. This issue is fixed in version 1.14.5 and 1.13.6. |
| DOMSanitizer is a DOM/SVG/MathML Sanitizer for PHP 7.3+. Prior to version 1.0.15, the isDangerousUrl() method is responsible for rejecting dangerous URL values in the href and xlink:href attributes. The weakness is that "javascript:" is rejected as a scheme, while "data:" is rejected only when the literal substring onload appears in the URL value (/^data:.*onload/i). Because data: payloads are routinely Base64-encoded, the dangerous content (<script>, event handlers, etc.) is invisible to that substring test. A URL such as data:text/html;base64,… therefore survives in href / xlink:href, even though the decoded payload is active markup. This is an incomplete input-validation / sanitization defect in the sanitizer itself. This issue has been patched in version 1.0.15. |
| InvoicePlane is a self-hosted open source application for managing invoices, clients, and payments. In version 1.7.2, an authorization guard to Users::change_password(), was added to address a previous authorization flaw that allowed a secondary administrator (user_type=1, user_id != 1) to directly change the password of the primary administrator (user_id=1) through users/change_password/{id}. That remediation, however, protects only the direct password-change operation. It does not protect the identity attribute that password recovery actually trusts: user_email. Users::form() applies no equivalent object-level authorization check when editing the primary administrator's account, and user_email is not included in PROTECTED_FIELDS. A secondary administrator can therefore rewrite the primary administrator's email address, then drive the public password-recovery flow — which resolves the account by user_email — to receive the reset token and take over user_id=1. The result is an alternate attack path that achieves the same impact PR #1638 was intended to prevent: cross-administrator full account takeover of the primary administrator. This issue has been patched via commit 8616fa4. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, is_pem_format in jwt/utils.py is affected because is_pem_format does not recognize every PEM representation accepted by the cryptography loader. This occurs when an application mixes HMAC and asymmetric algorithms and supplies a mutated public-key PEM as raw key bytes. As a result, HMACAlgorithm.prepare_key treats the unrecognized asymmetric public key as an HMAC secret. Consequently, an attacker who knows the public key can forge authenticated HMAC tokens. This issue is fixed in version 2.14.0. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
| Wind River VxWorks 7 prior to 26.09, specific system call arguments can result in the IPNET subsystem failing to properly release allocated kernel memory and system file descriptors before terminating the calling application. Fixed in Version 26.09. |
| A code injection vulnerability has been discovered in the Robot Operating System 2 (ROS 2) 'ros2topic' command-line tool, affecting all ROS 2 distributions from Crystal Clemmys up to and including Lyrical Luth and Rolling Ridley. The vulnerability lies in the 'hz' verb, which reports the publishing rate of a topic and accepts a user-provided Python expression via the --filter option. This input is passed directly to the eval() function without sanitization, allowing a local user to craft and execute arbitrary code. |
| js-yaml is a JavaScript YAML parser and dumper. From 3.0.0 until 3.15.2, 4.3.2, and 5.4.1, maxTotalMergeKeys in lib/js-yaml/loader.js and lib/loader.js does not count empty mapping sources while processing the merge key <<. An attacker can alias a large sequence of empty mappings into many merge targets, causing O(N * K) processing while totalMergeKeys remains unchanged and the configured resource limit is never reached. A relatively small YAML document can therefore cause prolonged CPU consumption in applications that parse untrusted YAML, and merge processing is enabled by default on these release lines. In v3 & v4, merge is enabled by default so the severity score is higher. This issue is fixed in versions 3.15.2, 4.3.2, and 5.4.1. |
| A vulnerability has been found in FastStone Image Viewer up to 8.3. The impacted element is an unknown function of the component 1bpp RLE Decoder. The manipulation leads to out-of-bounds write. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7.1 and iPadOS 26.7.1, macOS Sequoia 15.8.1, macOS Tahoe 26.7.1. Processing a maliciously crafted file may lead to arbitrary code execution. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals on versions of iOS before iOS 27. |
| Authlib (v1.7.2 and below) contains a signature verification bypass vulnerability. The JsonWebSignature.deserialize_json() method accepts a JSON Serialization JWS object and returns the payload as successfully verified without checking for a signature and without requiring a cryptographic key. |
| copyparty contains a volume restriction bypass vulnerability in its SFTP front end that allows authenticated SFTP users to create, remove, and truncate arbitrary paths outside permitted volume boundaries by exploiting three handlers that bypass the xvol volflag enforcement. The _mkdir, _rmdir, and _chattr handlers construct destination paths using vfs.get(), vn.canonical(), and os.path.join() without invoking the chk_ap access check, enabling attackers to traverse symlinks leaving a volume's top directory and perform unauthorized file creation, deletion, or truncation via SSH_FXP_SETSTAT operations on paths outside any volume the account is authorized to access. |
| MaxKB is an open-source AI assistant for enterprise. From version 2.0.0 through 2.9.2, a lowest-role workspace member denied access to a tool by WorkspaceUserResourcePermission can still bind its identifier through tool_ids, skill_tool_ids, or mcp_tool_ids and execute it through the agent or workflow dispatch path. The dispatch path does not reapply the per-tool grant enforced by dedicated tool routes, and tool execution decrypts server-side init_params, allowing the caller to receive credentials carried by the denied tool. No fixed version is available as of this review. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy copies every decoded HTTP/2 Host header value before discarding it when :authority is already present. The discarded value bypasses saveHeader, so its bytes and count are not charged against request header limits. An unauthenticated client can use HPACK indexing to submit many references to a large Host value across a bounded number of streams, forcing extreme header-copy allocation and causing the proxy to be out-of-memory killed. The relevant scope boundary is that the demonstrated amplification uses HTTP/2 HPACK and the duplicate Host discard behavior. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's optional oghttp2 upstream HTTP/2 codec accepts a response trailer HEADERS frame without END_STREAM. Envoy completes and deferred-deletes the ActiveRequest while oghttp2 keeps the stream open, leaving ClientStreamImpl with a dangling response_decoder_ reference. A later frame on the stream can dispatch through the freed object and crash the process. The relevant scope boundary is that the default nghttp2 codec rejects the malformed trailers, and the trigger is upstream-only with oghttp2 enabled. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
