| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| EGallery version 1.2 contains an unauthenticated arbitrary file upload vulnerability in the uploadify.php script. The application fails to validate file types or enforce authentication, allowing remote attackers to upload malicious PHP files directly into the web-accessible egallery/ directory. This results in full remote code execution under the web server context. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits()
The syzbot reported issue in hfs_find_set_zero_bits():
=====================================================
BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151
hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408
hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353
__block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151
block_write_begin fs/buffer.c:2262 [inline]
cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
cont_expand_zero fs/buffer.c:2528 [inline]
cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494
hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654
notify_change+0x1993/0x1aa0 fs/attr.c:552
do_truncate+0x28f/0x310 fs/open.c:68
do_ftruncate+0x698/0x730 fs/open.c:195
do_sys_ftruncate fs/open.c:210 [inline]
__do_sys_ftruncate fs/open.c:215 [inline]
__se_sys_ftruncate fs/open.c:213 [inline]
__x64_sys_ftruncate+0x11b/0x250 fs/open.c:213
x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354
kmalloc_noprof include/linux/slab.h:905 [inline]
hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175
hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337
get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681
get_tree_bdev+0x38/0x50 fs/super.c:1704
hfs_get_tree+0x35/0x40 fs/hfs/super.c:388
vfs_get_tree+0xb0/0x5c0 fs/super.c:1804
do_new_mount+0x738/0x1610 fs/namespace.c:3902
path_mount+0x6db/0x1e90 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4427
x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
=====================================================
The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get():
HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL);
Finally, it can trigger the reported issue because kmalloc()
doesn't clear the allocated memory. If allocated memory contains
only zeros, then everything will work pretty fine.
But if the allocated memory contains the "garbage", then
it can affect the bitmap operations and it triggers
the reported issue.
This patch simply exchanges the kmalloc() on kzalloc()
with the goal to guarantee the correctness of bitmap operations.
Because, newly created allocation bitmap should have all
available blocks free. Potentially, initialization bitmap's read
operation could not fill the whole allocated memory and
"garbage" in the not initialized memory will be the reason of
volume coruptions and file system driver bugs. |
| A command injection vulnerability exists in GestioIP 3.0 commit ac67be and earlier in ip_checkhost.cgi. Crafted input to the 'ip' parameter allows attackers to execute arbitrary shell commands on the server via embedded base64-encoded payloads. Authentication may be required depending on deployment configuration. |
| The web application is not protected against cross-site request forgery attacks. Therefore, an attacker can trick users into performing actions on the application when they visit an attacker-controlled website or click on a malicious link. E.g. an attacker can forge malicious links to reset the admin password or create new users. |
| An authenticated attacker can trigger a stack based buffer overflow in the DHIP Service (TCP port 80). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| The password change function at /cgi/admin.cgi does not require the current/old password, which makes the application vulnerable to account takeover. An attacker can use this to forcefully set a new password within the -rsetpass+-aaction+- parameter for a user without knowing the old password, e.g. by exploiting a CSRF issue. |
| ADOdb is a PHP database class library that provides abstractions for performing queries and managing databases. In versions 5.22.9 and below, improper escaping of a query parameter may allow an attacker to execute arbitrary SQL statements when the code using ADOdb connects to a sqlite3 database and calls the metaColumns(), metaForeignKeys() or metaIndexes() methods with a crafted table name. This is fixed in version 5.22.10. To workaround this issue, only pass controlled data to metaColumns(), metaForeignKeys() and metaIndexes() method's $table parameter. |
| SAP Group Reporting Data Collection does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. On successful exploitation, specific data can be changed via the Enter Package Data app although the user does not have sufficient authorization causing high impact on Integrity of the appliction.
|
| Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2. |
| Cleartext transmission of sensitive information for some BigDL software maintained by Intel(R) before version 2.5.0 may allow an authenticated user to potentially enable denial of service via adjacent access. |
| rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to version 1.0.3, there is a flaw in the timestamp response signature verification logic. In particular, chain verification is performed against the TSR's embedded certificates up to the trusted root(s), but fails to verify the TSR's own signature against the timestamping leaf certificates. Consequently, vulnerable versions perform insufficient signature validation to properly consider a TSR verified, as the attacker can introduce any TSR signature so long as the embedded leaf chains up to some root TSA. This issue has been patched in version 1.0.3. There is no workaround for this issue. |
| Mail-0's Zero is an open-source email solution. In version 0.8 it's possible for an attacker to craft an email that executes javascript leading to session hijacking due to improper sanitization. This issue has been patched in version 0.81. |
| Micro-Star International Z-series motherboards (Z590, Z490, and Z790) and B-series motherboards (B760, B560, B660, and B460) with firmware 7D25v14, 7D25v17 to 7D25v19, and 7D25v1A to 7D25v1H was discovered to contain a write-what-where condition in the in the SW handler for SMI 0xE3. Motherboard's with the following chipsets are affected: Intel 300, Intel 400, Intel 500, Intel 600, Intel 700, AMD 300, AMD 400, AMD 500, AMD 600 and AMD 700. |
| A vulnerability has been found in keerti1924 Secret-Coder-PHP-Project 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /secret_coder.sql. The manipulation leads to inclusion of sensitive information in source code. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256315. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Database scanning using username and password stores the credentials in plaintext or encoded format within files at the endpoint. This has been identified as a significant security risk. This will lead to exposure of sensitive information for unauthorized access, potentially leading to severe consequences such as data breaches, unauthorized data manipulation, and compromised system integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: imx_sc_key - fix memory corruption on unload
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Check the untrusted offset in FF-A memory share
Verify the offset to prevent OOB access in the hypervisor
FF-A buffer in case an untrusted large enough value
[U32_MAX - sizeof(struct ffa_composite_mem_region) + 1, U32_MAX]
is set from the host kernel. |
| HCL DRYiCE Optibot Reset Station is impacted by insecure encryption of One-Time Passwords (OTPs). This could allow an attacker with access to the database to recover some or all encrypted values. |
| Use of Cryptographically Weak Pseudo-Random Number Generator (PRNG) in the SonicOS SSLVPN authentication token generator that, in certain cases, can be predicted by an attacker potentially resulting in authentication bypass. |
