| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential oob read in nilfs_btree_check_delete()
The function nilfs_btree_check_delete(), which checks whether degeneration
to direct mapping occurs before deleting a b-tree entry, causes memory
access outside the block buffer when retrieving the maximum key if the
root node has no entries.
This does not usually happen because b-tree mappings with 0 child nodes
are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen
if the b-tree root node read from a device is configured that way, so fix
this potential issue by adding a check for that case. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port()
Within kirin_pcie_parse_port(), the pcie->num_slots is compared to
pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead
to an overflow.
Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move
pcie->num_slots increment below the if-statement to avoid out-of-bounds
array access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08
Currently rsv_qp is freed before ib_unregister_device() is called
on HIP08. During the time interval, users can still dereg MR and
rsv_qp will be used in this process, leading to a UAF. Move the
release of rsv_qp after calling ib_unregister_device() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_vdpa: assign irq bypass producer token correctly
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Block path traversal
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix "in-kernel MMIO" check
TDX only supports kernel-initiated MMIO operations. The handle_mmio()
function checks if the #VE exception occurred in the kernel and rejects
the operation if it did not.
However, userspace can deceive the kernel into performing MMIO on its
behalf. For example, if userspace can point a syscall to an MMIO address,
syscall does get_user() or put_user() on it, triggering MMIO #VE. The
kernel will treat the #VE as in-kernel MMIO.
Ensure that the target MMIO address is within the kernel before decoding
instruction. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix out-of-bounds in dbNextAG() and diAlloc()
In dbNextAG() , there is no check for the case where bmp->db_numag is
greater or same than MAXAG due to a polluted image, which causes an
out-of-bounds. Therefore, a bounds check should be added in dbMount().
And in dbNextAG(), a check for the case where agpref is greater than
bmp->db_numag should be added, so an out-of-bounds exception should be
prevented.
Additionally, a check for the case where agno is greater or same than
MAXAG should be added in diAlloc() to prevent out-of-bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: always wait for both firmware loading attempts
In 'rtw_wait_firmware_completion()', always wait for both (regular and
wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()'
has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue
'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually
the wowlan one) is still in progress, causing UAF detected by KASAN. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid OOB when system.data xattr changes underneath the filesystem
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697
__ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573
ext4_lookup_entry fs/ext4/namei.c:1727 [inline]
ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795
lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633
filename_create+0x297/0x540 fs/namei.c:3980
do_symlinkat+0xf9/0x3a0 fs/namei.c:4587
__do_sys_symlinkat fs/namei.c:4610 [inline]
__se_sys_symlinkat fs/namei.c:4607 [inline]
__x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3e73ced469
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a
RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469
RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0
RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290
R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c
R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0
</TASK>
Calling ext4_xattr_ibody_find right after reading the inode with
ext4_get_inode_loc will lead to a check of the validity of the xattrs,
avoiding this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] <TASK>
[ 125.361285][ T1430] ? __warn (kernel/panic.c:693)
[ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970)
[ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151)
[ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm
[ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910)
[ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161)
[ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm
[ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma
[ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma
[ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231)
[ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393)
[ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339)
[ 125.531837][ T1430] kthread (kernel/kthread.c:389)
[ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147)
[ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
[ 125.566487][ T1430] </TASK>
[ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds
In the function init_conns(), after the create_con() and create_cm() for
loop if something fails. In the cleanup for loop after the destroy tag, we
access out of bound memory because cid is set to clt_path->s.con_num.
This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds
in the cleanup loop later. |
| In the Linux kernel, the following vulnerability has been resolved:
ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate()
The psc->div[] array has psc->num_div elements. These values come from
when we call clk_hw_register_div(). It's adc_divisors and
ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >=
instead of > to prevent an out of bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-write vulnerability has been identified in the gst_ssa_parse_remove_override_codes function of the gstssaparse.c file. This function is responsible for parsing and removing SSA (SubStation Alpha) style override codes, which are enclosed in curly brackets ({}). The issue arises when a closing curly bracket "}" appears before an opening curly bracket "{" in the input string. In this case, memmove() incorrectly duplicates a substring. With each successive loop iteration, the size passed to memmove() becomes progressively larger (strlen(end+1)), leading to a write beyond the allocated memory bounds. This vulnerability is fixed in 1.24.10. |
| CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176. |
