| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds write in trie_get_next_key()
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: Fix use-after-free in get_info()
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
<TASK>
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
fsdax: dax_unshare_iter needs to copy entire blocks
The code that copies data from srcmap to iomap in dax_unshare_iter is
very very broken, which bfoster's recent fsx changes have exposed.
If the pos and len passed to dax_file_unshare are not aligned to an
fsblock boundary, the iter pos and length in the _iter function will
reflect this unalignment.
dax_iomap_direct_access always returns a pointer to the start of the
kmapped fsdax page, even if its pos argument is in the middle of that
page. This is catastrophic for data integrity when iter->pos is not
aligned to a page, because daddr/saddr do not point to the same byte in
the file as iter->pos. Hence we corrupt user data by copying it to the
wrong place.
If iter->pos + iomap_length() in the _iter function not aligned to a
page, then we fail to copy a full block, and only partially populate the
destination block. This is catastrophic for data confidentiality
because we expose stale pmem contents.
Fix both of these issues by aligning copy_pos/copy_len to a page
boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that
we always copy full blocks.
We're not done yet -- there's no call to invalidate_inode_pages2_range,
so programs that have the file range mmap'd will continue accessing the
old memory mapping after the file metadata updates have completed.
Be careful with the return value -- if the unshare succeeds, we still
need to return the number of bytes that the iomap iter thinks we're
operating on. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Check if more than chunk-size bytes are written
A incorrectly formatted chunk may decompress into
more than LZNT_CHUNK_SIZE bytes and a index out of bounds
will occur in s_max_off. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Additional check in ntfs_file_release |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: clear wdev->cqm_config pointer on free
When we free wdev->cqm_config when unregistering, we also
need to clear out the pointer since the same wdev/netdev
may get re-registered in another network namespace, then
destroyed later, running this code again, which results in
a double-free. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix kernel bug due to missing clearing of checked flag
Syzbot reported that in directory operations after nilfs2 detects
filesystem corruption and degrades to read-only,
__block_write_begin_int(), which is called to prepare block writes, may
fail the BUG_ON check for accesses exceeding the folio/page size,
triggering a kernel bug.
This was found to be because the "checked" flag of a page/folio was not
cleared when it was discarded by nilfs2's own routine, which causes the
sanity check of directory entries to be skipped when the directory
page/folio is reloaded. So, fix that.
This was necessary when the use of nilfs2's own page discard routine was
applied to more than just metadata files. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: assign dh_key to NULL after kfree_sensitive
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a check for memory allocation
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/entry_32: Clear CPU buffers after register restore in NMI return
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. |
| In the Linux kernel, the following vulnerability has been resolved:
net: explicitly clear the sk pointer, when pf->create fails
We have recently noticed the exact same KASAN splat as in commit
6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket
creation fails"). The problem is that commit did not fully address the
problem, as some pf->create implementations do not use sk_common_release
in their error paths.
For example, we can use the same reproducer as in the above commit, but
changing ping to arping. arping uses AF_PACKET socket and if packet_create
fails, it will just sk_free the allocated sk object.
While we could chase all the pf->create implementations and make sure they
NULL the freed sk object on error from the socket, we can't guarantee
future protocols will not make the same mistake.
So it is easier to just explicitly NULL the sk pointer upon return from
pf->create in __sock_create. We do know that pf->create always releases the
allocated sk object on error, so if the pointer is not NULL, it is
definitely dangling. |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: use cond_resched() in nsim_dev_trap_report_work()
I am still seeing many syzbot reports hinting that syzbot
might fool nsim_dev_trap_report_work() with hundreds of ports [1]
Lets use cond_resched(), and system_unbound_wq
instead of implicit system_wq.
[1]
INFO: task syz-executor:20633 blocked for more than 143 seconds.
Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006
...
NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events nsim_dev_trap_report_work
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210
Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0
RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246
RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00
RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577
R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000
R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00
FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
spin_unlock_bh include/linux/spinlock.h:396 [inline]
nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline]
nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc3940c ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOBs when building SMB2_IOCTL request
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmode should keep reference to parent
The altmode device release refers to its parent device, but without keeping
a reference to it.
When registering the altmode, get a reference to the parent and put it in
the release function.
Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues
like this:
[ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 46.612867] ==================================================================
[ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[ 46.614538]
[ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 46.616042] Workqueue: events kobject_delayed_cleanup
[ 46.616446] Call Trace:
[ 46.616648] <TASK>
[ 46.616820] dump_stack_lvl+0x5b/0x7c
[ 46.617112] ? typec_altmode_release+0x38/0x129
[ 46.617470] print_report+0x14c/0x49e
[ 46.617769] ? rcu_read_unlock_sched+0x56/0x69
[ 46.618117] ? __virt_addr_valid+0x19a/0x1ab
[ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d
[ 46.618807] ? typec_altmode_release+0x38/0x129
[ 46.619161] kasan_report+0x8d/0xb4
[ 46.619447] ? typec_altmode_release+0x38/0x129
[ 46.619809] ? process_scheduled_works+0x3cb/0x85f
[ 46.620185] typec_altmode_release+0x38/0x129
[ 46.620537] ? process_scheduled_works+0x3cb/0x85f
[ 46.620907] device_release+0xaf/0xf2
[ 46.621206] kobject_delayed_cleanup+0x13b/0x17a
[ 46.621584] process_scheduled_works+0x4f6/0x85f
[ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10
[ 46.622353] ? hlock_class+0x31/0x9a
[ 46.622647] ? lock_acquired+0x361/0x3c3
[ 46.622956] ? move_linked_works+0x46/0x7d
[ 46.623277] worker_thread+0x1ce/0x291
[ 46.623582] ? __kthread_parkme+0xc8/0xdf
[ 46.623900] ? __pfx_worker_thread+0x10/0x10
[ 46.624236] kthread+0x17e/0x190
[ 46.624501] ? kthread+0xfb/0x190
[ 46.624756] ? __pfx_kthread+0x10/0x10
[ 46.625015] ret_from_fork+0x20/0x40
[ 46.625268] ? __pfx_kthread+0x10/0x10
[ 46.625532] ret_from_fork_asm+0x1a/0x30
[ 46.625805] </TASK>
[ 46.625953]
[ 46.626056] Allocated by task 678:
[ 46.626287] kasan_save_stack+0x24/0x44
[ 46.626555] kasan_save_track+0x14/0x2d
[ 46.626811] __kasan_kmalloc+0x3f/0x4d
[ 46.627049] __kmalloc_noprof+0x1bf/0x1f0
[ 46.627362] typec_register_port+0x23/0x491
[ 46.627698] cros_typec_probe+0x634/0xbb6
[ 46.628026] platform_probe+0x47/0x8c
[ 46.628311] really_probe+0x20a/0x47d
[ 46.628605] device_driver_attach+0x39/0x72
[ 46.628940] bind_store+0x87/0xd7
[ 46.629213] kernfs_fop_write_iter+0x1aa/0x218
[ 46.629574] vfs_write+0x1d6/0x29b
[ 46.629856] ksys_write+0xcd/0x13b
[ 46.630128] do_syscall_64+0xd4/0x139
[ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 46.630820]
[ 46.630946] Freed by task 48:
[ 46.631182] kasan_save_stack+0x24/0x44
[ 46.631493] kasan_save_track+0x14/0x2d
[ 46.631799] kasan_save_free_info+0x3f/0x4d
[ 46.632144] __kasan_slab_free+0x37/0x45
[ 46.632474]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Consider the NULL character when validating the event length
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: fix global oob in wwan_rtnl_policy
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix use-after-free in taprio_change()
In 'taprio_change()', 'admin' pointer may become dangling due to sched
switch / removal caused by 'advance_sched()', and critical section
protected by 'q->current_entry_lock' is too small to prevent from such
a scenario (which causes use-after-free detected by KASAN). Fix this
by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update
'admin' immediately before an attempt to schedule freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: use RCU read-side critical section in taprio_dump()
Fix possible use-after-free in 'taprio_dump()' by adding RCU
read-side critical section there. Never seen on x86 but
found on a KASAN-enabled arm64 system when investigating
https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa:
[T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0
[T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862
[T15862]
[T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2
[T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024
[T15862] Call trace:
[T15862] dump_backtrace+0x20c/0x220
[T15862] show_stack+0x2c/0x40
[T15862] dump_stack_lvl+0xf8/0x174
[T15862] print_report+0x170/0x4d8
[T15862] kasan_report+0xb8/0x1d4
[T15862] __asan_report_load4_noabort+0x20/0x2c
[T15862] taprio_dump+0xa0c/0xbb0
[T15862] tc_fill_qdisc+0x540/0x1020
[T15862] qdisc_notify.isra.0+0x330/0x3a0
[T15862] tc_modify_qdisc+0x7b8/0x1838
[T15862] rtnetlink_rcv_msg+0x3c8/0xc20
[T15862] netlink_rcv_skb+0x1f8/0x3d4
[T15862] rtnetlink_rcv+0x28/0x40
[T15862] netlink_unicast+0x51c/0x790
[T15862] netlink_sendmsg+0x79c/0xc20
[T15862] __sock_sendmsg+0xe0/0x1a0
[T15862] ____sys_sendmsg+0x6c0/0x840
[T15862] ___sys_sendmsg+0x1ac/0x1f0
[T15862] __sys_sendmsg+0x110/0x1d0
[T15862] __arm64_sys_sendmsg+0x74/0xb0
[T15862] invoke_syscall+0x88/0x2e0
[T15862] el0_svc_common.constprop.0+0xe4/0x2a0
[T15862] do_el0_svc+0x44/0x60
[T15862] el0_svc+0x50/0x184
[T15862] el0t_64_sync_handler+0x120/0x12c
[T15862] el0t_64_sync+0x190/0x194
[T15862]
[T15862] Allocated by task 15857:
[T15862] kasan_save_stack+0x3c/0x70
[T15862] kasan_save_track+0x20/0x3c
[T15862] kasan_save_alloc_info+0x40/0x60
[T15862] __kasan_kmalloc+0xd4/0xe0
[T15862] __kmalloc_cache_noprof+0x194/0x334
[T15862] taprio_change+0x45c/0x2fe0
[T15862] tc_modify_qdisc+0x6a8/0x1838
[T15862] rtnetlink_rcv_msg+0x3c8/0xc20
[T15862] netlink_rcv_skb+0x1f8/0x3d4
[T15862] rtnetlink_rcv+0x28/0x40
[T15862] netlink_unicast+0x51c/0x790
[T15862] netlink_sendmsg+0x79c/0xc20
[T15862] __sock_sendmsg+0xe0/0x1a0
[T15862] ____sys_sendmsg+0x6c0/0x840
[T15862] ___sys_sendmsg+0x1ac/0x1f0
[T15862] __sys_sendmsg+0x110/0x1d0
[T15862] __arm64_sys_sendmsg+0x74/0xb0
[T15862] invoke_syscall+0x88/0x2e0
[T15862] el0_svc_common.constprop.0+0xe4/0x2a0
[T15862] do_el0_svc+0x44/0x60
[T15862] el0_svc+0x50/0x184
[T15862] el0t_64_sync_handler+0x120/0x12c
[T15862] el0t_64_sync+0x190/0x194
[T15862]
[T15862] Freed by task 6192:
[T15862] kasan_save_stack+0x3c/0x70
[T15862] kasan_save_track+0x20/0x3c
[T15862] kasan_save_free_info+0x4c/0x80
[T15862] poison_slab_object+0x110/0x160
[T15862] __kasan_slab_free+0x3c/0x74
[T15862] kfree+0x134/0x3c0
[T15862] taprio_free_sched_cb+0x18c/0x220
[T15862] rcu_core+0x920/0x1b7c
[T15862] rcu_core_si+0x10/0x1c
[T15862] handle_softirqs+0x2e8/0xd64
[T15862] __do_softirq+0x14/0x20 |
