Total
33354 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-47671 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. | ||||
| CVE-2024-47669 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix state management in error path of log writing function After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. | ||||
| CVE-2024-47667 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf | ||||
| CVE-2024-47665 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. | ||||
| CVE-2024-47659 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smack: tcp: ipv4, fix incorrect labeling Currently, Smack mirrors the label of incoming tcp/ipv4 connections: when a label 'foo' connects to a label 'bar' with tcp/ipv4, 'foo' always gets 'foo' in returned ipv4 packets. So, 1) returned packets are incorrectly labeled ('foo' instead of 'bar') 2) 'bar' can write to 'foo' without being authorized to write. Here is a scenario how to see this: * Take two machines, let's call them C and S, with active Smack in the default state (no settings, no rules, no labeled hosts, only builtin labels) * At S, add Smack rule 'foo bar w' (labels 'foo' and 'bar' are instantiated at S at this moment) * At S, at label 'bar', launch a program that listens for incoming tcp/ipv4 connections * From C, at label 'foo', connect to the listener at S. (label 'foo' is instantiated at C at this moment) Connection succeedes and works. * Send some data in both directions. * Collect network traffic of this connection. All packets in both directions are labeled with the CIPSO of the label 'foo'. Hence, label 'bar' writes to 'foo' without being authorized, and even without ever being known at C. If anybody cares: exactly the same happens with DCCP. This behavior 1st manifested in release 2.6.29.4 (see Fixes below) and it looks unintentional. At least, no explanation was provided. I changed returned packes label into the 'bar', to bring it into line with the Smack documentation claims. | ||||
| CVE-2024-47175 | 3 Debian, Openprinting, Redhat | 8 Debian Linux, Libppd, Enterprise Linux and 5 more | 2025-11-03 | 8.6 High |
| CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176. | ||||
| CVE-2024-47076 | 2 Openprinting, Redhat | 7 Libcupsfilters, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 8.6 High |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. The `cfGetPrinterAttributes5` function in `libcupsfilters` does not sanitize IPP attributes returned from an IPP server. When these IPP attributes are used, for instance, to generate a PPD file, this can lead to attacker controlled data to be provided to the rest of the CUPS system. | ||||
| CVE-2024-46854 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dpaa: Pad packets to ETH_ZLEN When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination | ||||
| CVE-2024-46848 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Limit the period on Haswell Running the ltp test cve-2015-3290 concurrently reports the following warnings. perfevents: irq loop stuck! WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174 intel_pmu_handle_irq+0x285/0x370 Call Trace: <NMI> ? __warn+0xa4/0x220 ? intel_pmu_handle_irq+0x285/0x370 ? __report_bug+0x123/0x130 ? intel_pmu_handle_irq+0x285/0x370 ? __report_bug+0x123/0x130 ? intel_pmu_handle_irq+0x285/0x370 ? report_bug+0x3e/0xa0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? irq_work_claim+0x1e/0x40 ? intel_pmu_handle_irq+0x285/0x370 perf_event_nmi_handler+0x3d/0x60 nmi_handle+0x104/0x330 Thanks to Thomas Gleixner's analysis, the issue is caused by the low initial period (1) of the frequency estimation algorithm, which triggers the defects of the HW, specifically erratum HSW11 and HSW143. (For the details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/) The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL event, but the initial period in the freq mode is 1. The erratum is the same as the BDM11, which has been supported in the kernel. A minimum period of 128 is enforced as well on HSW. HSW143 is regarding that the fixed counter 1 may overcount 32 with the Hyper-Threading is enabled. However, based on the test, the hardware has more issues than it tells. Besides the fixed counter 1, the message 'interrupt took too long' can be observed on any counter which was armed with a period < 32 and two events expired in the same NMI. A minimum period of 32 is enforced for the rest of the events. The recommended workaround code of the HSW143 is not implemented. Because it only addresses the issue for the fixed counter. It brings extra overhead through extra MSR writing. No related overcounting issue has been reported so far. | ||||
| CVE-2024-46846 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip: Resolve unbalanced runtime PM / system PM handling Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and simply disabled clocks unconditionally when suspending the system. This causes problems when the device is already runtime suspended when we go to sleep -- in which case we double-disable clocks and produce a WARNing. Switch back to pm_runtime_force_{suspend,resume}(), because that still seems like the right thing to do, and the aforementioned commit makes no explanation why it stopped using it. Also, refactor some of the resume() error handling, because it's not actually a good idea to re-disable clocks on failure. | ||||
| CVE-2024-46840 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: clean up our handling of refs == 0 in snapshot delete In reada we BUG_ON(refs == 0), which could be unkind since we aren't holding a lock on the extent leaf and thus could get a transient incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which could happen if we have extent tree corruption. Change that to return -EUCLEAN. In do_walk_down() we catch this case and handle it correctly, however we return -EIO, which -EUCLEAN is a more appropriate error code. Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert that to proper error handling. Also adjust the error message so we can actually do something with the information. | ||||
| CVE-2024-46832 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices". | ||||
| CVE-2024-46830 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX reads guest memory. Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN via sync_regs(), which already holds SRCU. I.e. trying to precisely use kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause problems. Acquiring SRCU isn't all that expensive, so for simplicity, grab it unconditionally for KVM_SET_VCPU_EVENTS. ============================= WARNING: suspicious RCU usage 6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted ----------------------------- include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by repro/1071: #0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm] stack backtrace: CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x13f/0x1a0 kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel] load_vmcs12_host_state+0x432/0xb40 [kvm_intel] vmx_leave_nested+0x30/0x40 [kvm_intel] kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm] kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm] ? mark_held_locks+0x49/0x70 ? kvm_vcpu_ioctl+0x7d/0x970 [kvm] ? kvm_vcpu_ioctl+0x497/0x970 [kvm] kvm_vcpu_ioctl+0x497/0x970 [kvm] ? lock_acquire+0xba/0x2d0 ? find_held_lock+0x2b/0x80 ? do_user_addr_fault+0x40c/0x6f0 ? lock_release+0xb7/0x270 __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7ff11eb1b539 </TASK> | ||||
| CVE-2024-46828 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: fix bulk flow accounting logic for host fairness In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. | ||||
| CVE-2024-46826 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ELF: fix kernel.randomize_va_space double read ELF loader uses "randomize_va_space" twice. It is sysctl and can change at any moment, so 2 loads could see 2 different values in theory with unpredictable consequences. Issue exactly one load for consistent value across one exec. | ||||
| CVE-2024-46817 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Stop amdgpu_dm initialize when stream nums greater than 6 [Why] Coverity reports OVERRUN warning. Should abort amdgpu_dm initialize. [How] Return failure to amdgpu_dm_init. | ||||
| CVE-2024-46815 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check num_valid_sets before accessing reader_wm_sets[] [WHY & HOW] num_valid_sets needs to be checked to avoid a negative index when accessing reader_wm_sets[num_valid_sets - 1]. This fixes an OVERRUN issue reported by Coverity. | ||||
| CVE-2024-46812 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration [Why] Coverity reports Memory - illegal accesses. [How] Skip inactive planes. | ||||
| CVE-2024-46794 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix data leak in mmio_read() The mmio_read() function makes a TDVMCALL to retrieve MMIO data for an address from the VMM. Sean noticed that mmio_read() unintentionally exposes the value of an initialized variable (val) on the stack to the VMM. This variable is only needed as an output value. It did not need to be passed to the VMM in the first place. Do not send the original value of *val to the VMM. [ dhansen: clarify what 'val' is used for. ] | ||||
| CVE-2024-46783 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: fix return value of tcp_bpf_sendmsg() When we cork messages in psock->cork, the last message triggers the flushing will result in sending a sk_msg larger than the current message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes negative at least in the following case: 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); // <==== HERE 473 return -EACCES; Therefore, it could lead to the following BUG with a proper value of 'copied' (thanks to syzbot). We should not use negative 'copied' as a return value here. ------------[ cut here ]------------ kernel BUG at net/socket.c:733! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b43284ab3 #0 Hardware name: linux,dummy-virt (DT) pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : sock_sendmsg_nosec net/socket.c:733 [inline] pc : sock_sendmsg_nosec net/socket.c:728 [inline] pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745 lr : sock_sendmsg_nosec net/socket.c:730 [inline] lr : __sock_sendmsg+0x54/0x60 net/socket.c:745 sp : ffff800088ea3b30 x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000 x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000 x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90 x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0 x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000 x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef Call trace: sock_sendmsg_nosec net/socket.c:733 [inline] __sock_sendmsg+0x5c/0x60 net/socket.c:745 ____sys_sendmsg+0x274/0x2ac net/socket.c:2597 ___sys_sendmsg+0xac/0x100 net/socket.c:2651 __sys_sendmsg+0x84/0xe0 net/socket.c:2680 __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151 el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598 Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000) ---[ end trace 0000000000000000 ]--- | ||||