| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cacheinfo: Fix node reference leak in populate_cache_leaves
Currently, the while loop drops the reference to prev in each iteration.
If the loop terminates early due to a break, the final of_node_put(np)
correctly drops the reference to the current node.
However, if the loop terminates naturally because np == NULL, calling
of_node_put(np) is a no-op. This leaves the last valid node stored in
prev without its reference dropped, resulting in a node reference leak.
Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: always put unsuccessfully committed target pids
damon_commit_target() puts and gets the destination and the source target
pids. It puts the destination target pid because it will be overwritten
by the source target pid. It gets the source pid because the caller is
supposed to eventually put the pids. In more detail, the caller will call
damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source
context. And in this case, [f]vaddr operation set's cleanup_target()
callback will put the pids.
The commit operation is made at the context level. The operation can fail
in multiple places including in the middle and after the targets commit
operations. For any such failures, immediately the error is returned to
the damon_commit_ctx() caller. If some or all of the source target pids
were committed to the destination during the unsuccessful context commit
attempt, those pids should be put twice.
The source context will do the put operations using the above explained
routine. However, let's suppose the destination context was not
originally using [f]vaddr operation set and the commit failed before the
ops of the source context is committed. The destination does not have the
cleanup_target() ops callback, so it cannot put the pids via the
damon_destroy_ctx().
As a result, the pids are leaked. The issue in the real world would be
not very common. The commit feature is for changing parameters of running
DAMON context while inheriting internal status like the monitoring
results. The monitoring results of a physical address range ain't have
things that are beneficial to be inherited to a virtual address ranges
monitoring. So the problem-causing DAMON control would be not very common
in the real world. That said, it is a supported feature. And
damon_commit_target() failure due to memory allocation is relatively
realistic [1] if there are a huge number of target regions.
Fix by putting the pids in the commit operation in case of the failures.
The issue was discovered [2] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
A PAGEMAP_SCAN ioctl requesting PM_SCAN_WP_MATCHING on a hugetlb VMA hangs
the calling thread, unkillably, as soon as the scan reaches an unpopulated
part of the range:
do_pagemap_scan()
walk_page_range()
walk_hugetlb_range()
hugetlb_vma_lock_read() # take the vma lock for read ...
pagemap_scan_pte_hole() # ... ->pte_hole() for a hole
uffd_wp_range()
change_protection()
hugetlb_change_protection()
hugetlb_vma_lock_write() # ... and block taking it for write
walk_hugetlb_range() holds the hugetlb vma lock for read across the whole
walk. A present entry goes to ->hugetlb_entry(); an unpopulated one goes
to ->pte_hole(), i.e. pagemap_scan_pte_hole(). To write-protect the hole
that handler calls uffd_wp_range(), which on a hugetlb VMA reaches
hugetlb_change_protection() and takes the same vma lock for write. The
thread then blocks in down_write() waiting for the read lock it is itself
holding.
The populated path avoids this: pagemap_scan_hugetlb_entry()
write-protects the entry inline under the page-table lock and never enters
hugetlb_change_protection().
Do the same for holes. Fault in the page table and install the uffd-wp
marker directly with make_uffd_wp_huge_pte() under the page-table lock,
rather than routing through uffd_wp_range(). That is the same sequence
hugetlb_change_protection() runs for an unpopulated entry, minus the vma
write lock -- which is safe to skip because PMD sharing is disabled on
uffd-wp VMAs (hugetlb_unshare_all_pmds() runs at registration), leaving
nothing for that lock to serialise against. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
Patch series "mm/hmm: A fix and a selftest", v3.
Patch 1 fixes a stale warning present from the time when only migration
softleaf entries were supported at the PMD level.
Patch 2 adds some code into hmm-tests.c which exercises the pagemap path
for PMD device-private entries.
This patch (of 2):
pagemap_pmd_range_thp() warns if a non-present PMD is not a migration
entry. This became false once device-private entries at the PMD level
were added.
Therefore, remove the stale migration-only assertion. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: fix uninitialized struct pages for ZONE_DEVICE
If DAX memory is hotplugged into an unoccupied subsection of an early
section, section_activate() reuses the unoptimized boot memmap. However,
compound_nr_pages() still assumes that vmemmap optimization is in effect
and initializes only the reduced number of struct pages. As a result, the
remaining tail struct pages are left uninitialized, which can later lead
to unexpected behavior or crashes.
Fix this by treating early sections as unoptimized when calculating how
many struct pages to initialize. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES
When using scratch_scale, the scratch sizes are rounded up to
CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This
is not done when using fixed scratch sizes via command line. This can
result in user specifying a size which is not aligned, and thus kernel
releasing a pageblock that is only partially scratch.
Do the rounding up for both cases in scratch_size_update(). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix fault in unaligned fixup
Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs,
instead of kmalloc_obj() / kmalloc_objs() to prevent access to
uninitialized data.
Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at
mtd_get_fact_prot_info. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: pl353: fix probe resource allocation
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: avoid moving extents to occupied clusters
For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical
me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and
expects ocfs2_probe_alloc_group() to replace it with a free run in the
target block group.
The probe currently leaves *phys_cpos unchanged if the scan reaches the
end of the group without finding a free run. An occupied goal at the last
bit can therefore survive the probe and be passed to
__ocfs2_move_extent(), which copies file data into a cluster still owned
by another inode before the bitmap is updated.
When the probe does find a free run, it also subtracts move_len from the
ending bit. The start of an N-bit run ending at i is i - N + 1, so the
current calculation can report the bit immediately before the free run.
Clear *phys_cpos before scanning and use the correct free-run start.
Callers already treat a zero result as -ENOSPC, so failed probes no longer
continue with an occupied caller-controlled goal. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
[BUG]
On-disk corruption setting l_next_free_rec to 0 in an inode's embedded
extent list triggers a UBSAN panic on the next write to that file.
[CAUSE]
ocfs2_sum_rightmost_rec() computes
i = le16_to_cpu(el->l_next_free_rec) - 1
and accesses el->l_recs[i] without validating i. When l_next_free_rec
is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls
past the end of the array. Either case violates the
__counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN.
[FIX]
Validate the inode's embedded extent list when the inode is read, in
ocfs2_validate_inode_block(): l_count must be non-zero and no larger
than the inode block can hold, and l_next_free_rec must not exceed
l_count. A corrupt list is rejected at read time, before the b-tree
code can index l_recs[] out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
During unmount, ocfs2_journal_shutdown() frees the journal and sets
osb->journal to NULL. Later, when VFS evicts remaining cached inodes,
ocfs2_evict_inode() -> ocfs2_clear_inode() -> ocfs2_checkpoint_inode()
-> ocfs2_ci_fully_checkpointed() dereferences osb->journal, causing a
NULL pointer dereference.
Fix this by adding a NULL check for osb->journal in
ocfs2_checkpoint_inode(). If the journal is NULL, it has already been
fully flushed and destroyed during shutdown, so there is nothing to
checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject dinodes with non-canonical i_mode type
Patch series "ocfs2: harden inode validators against forged metadata", v2.
This series adds three structural checks to OCFS2 dinode validation so
malformed on-disk fields are rejected before ocfs2_populate_inode() copies
them into the in-core inode.
The checks cover:
- i_mode values whose type bits do not name a canonical POSIX file
type;
- non-device dinodes whose id1.dev1.i_rdev field is non-zero; and
- non-inline dinodes that claim non-zero i_size while i_clusters is
zero, covering directories unconditionally and regular files on
non-sparse volumes.
The normal read path reports these through ocfs2_error(), matching the
existing suballoc-slot, inline-data, chain-list, and refcount checks. The
online filecheck path uses the same structural predicates but keeps its
own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead
of calling ocfs2_error().
This patch (of 3):
ocfs2_validate_inode_block() currently accepts any non-zero i_mode value.
ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode
and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file
iops; an unrecognised type falls through to ocfs2_special_file_iops and
init_special_inode().
Reject dinodes whose type bits do not name one of the seven canonical
POSIX file types. Use fs_umode_to_ftype(), the same generic file-type
conversion helper OCFS2 already uses for directory entries, so the
accepted inode type set matches the kernel file-type vocabulary instead of
open-coding a local switch.
Apply the same structural check to the online filecheck read path.
filecheck keeps its own error namespace, so it reports malformed i_mode
through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of
calling ocfs2_error(), but it must not allow a malformed dinode to proceed
into ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Fix frags[] overflow by bounding frame_count
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: swp: Improve locking user experience
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite option) and lock_len, which in practice should be
reduced down to 0, is set to "nor->params->size - (ofs + len)" which is
a positive number. This is wrong.
An easy way is to simply add an extra condition. In the unlock() path,
if we can achieve the same result from both sides, it means we unlock
everything and lock_len must simply be 0. A comment is added to clarify
that logic. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: Fix jump_label smp syncing
The original commit 8c30b0018f9d ("openrisc: Add jump label support")
copies from arm64 and does not properly consider how icache invalidation
on remote cores works in OpenRISC. On OpenRISC remote icaches need to
be invalidated otherwise static key's may remain state after updating.
Fix SMP cache syncing by:
1. Properly invalidate remote core icaches on SMP systems by using
icache_all_inv. The old code uses kick_all_cpus_sync() which runs a
no-op IPI function call on remote CPU's which does execute a lot of
code and flushes many cache lines in the process, but does not flush
all and it's not correct on OpenRISC.
2. For architectures that do not have WRITETHROUGH caches be sure
to flush the dcache after patching.
To test this I first reproduced the issue using a custom test module
[0]. The test confirmed that some icache lines maintained stale
static_key code sequences after calling static_branch_enable(). After
this patch there are no longer jump_label coherency issues.
[0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt
tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls
crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret()
without installing a completion callback, discards both return values,
and immediately frees the kpp_request via kpp_request_free(). When the
resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE,
keembay-ocs), either operation returns -EINPROGRESS and the deferred
completion worker dereferences the freed request.
The path fires automatically from the hwrng_fillfn kernel thread via
tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session ->
tpm_buf_append_salt on every entropy poll, without any userland action.
Install crypto_req_done as the completion callback, wrap both KPP
operations in crypto_wait_req(), and propagate errors to the caller.
The wait is a no-op for synchronous backends. |
