| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow in Chromecast in Google Chrome prior to 150.0.7871.182 allowed a local attacker to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: High) |
| Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) a Generation of Incorrect Security Tokens vulnerability in the IAM. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.3, an out-of-bounds heap read could occur in the C response parser while building an error message for a malformed response. An attacker controlled server, or possibly an accidental response, could trigger a DoS in the client. The vulnerable path was error message construction in aiohttp/_http_parser.pyx, where an llhttp error-position pointer was used to build a snippet for malformed chunked responses and malformed request or response bytes at the buffer end. This issue is fixed in version 3.14.3. |
| A stack-based out-of-bounds read vulnerability exists in the "s_vlog" function of stunnel, when handling oversized log messages via "vsnprintf". A remote attacker with network access to a stunnel service can send protocol inputs that trigger a log message longer than 1024 bytes, leading to an out-of-bounds stack read and a potential crash. In certain corner cases, the same vulnerability could be used to replace a series of trailing "\n" characters with "\0". |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Processing a maliciously crafted image may lead to arbitrary code execution. |
| An integer overflow was addressed with improved input validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing a maliciously crafted texture may lead to unexpected app termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A remote user may be able to cause unexpected system termination or corrupt kernel memory. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Parsing a maliciously crafted file may lead to an unexpected app termination. |
| The issue was addressed with improved bounds checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to disclose kernel memory. |
| Out of bounds read in Media in Google Chrome on Mac prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Side-channel information leakage in GPU in Google Chrome on Android prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ------------[ cut here ]------------
[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10
[ 39.202690] Tainted: [U]=USER
[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 39.202691] Call Trace:
[ 39.202692] <TASK>
[ 39.202695] dump_stack_lvl+0x6e/0xa0
[ 39.202699] ubsan_epilogue+0x5/0x30
[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]
[ 39.202800] ? find_held_lock+0x2b/0x80
[ 39.202803] ? mark_held_locks+0x40/0x70
[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]
[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]
[ 39.202900] __mmu_notifier_release+0x1f5/0x270
[ 39.202905] exit_mmap+0x40e/0x450
[ 39.202912] __mmput+0x45/0x110
[ 39.202914] exit_mm+0xc5/0x130
[ 39.202916] do_exit+0x21c/0x500
[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190
[ 39.202920] do_group_exit+0x36/0xa0
[ 39.202922] get_signal+0x8f8/0x900
[ 39.202926] arch_do_signal_or_restart+0x35/0x100
[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290
[ 39.202932] do_syscall_64+0xa1/0x180
[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0
[ 39.202937] ? lock_release+0xd2/0x2a0
[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0
[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0
[ 39.202944] ? clear_bhb_loop+0x25/0x80
[ 39.202946] ? clear_bhb_loop+0x25/0x80
[ 39.202947] ? clear_bhb_loop+0x25/0x80
[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 39.202952] RIP: 0033:0x7fa945e543e1
[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.
[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293
[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3
[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff
[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0
[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000
[ 39.202970] </TASK>
[ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad) |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_flat: Fix integer overflow bug on 32 bit systems
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long); |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: add index check to assert to avoid buffer overflow in _read_freq()
Pass the freq index to the assert function to make sure
we do not read a freq out of the opp->rates[] table when called
from the indexed variants:
dev_pm_opp_find_freq_exact_indexed() or
dev_pm_opp_find_freq_ceil/floor_indexed().
Add a secondary parameter to the assert function, unused
for assert_single_clk() then add assert_clk_index() which
will check for the clock index when called from the _indexed()
find functions. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: fix out-of-bounds read during lookup
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch. |
