| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Nexi XPay Build WordPress plugin through 7.6.2 does not correctly validate the security token on its payment notification route, accepting the request when the target order has no stored token, which allows unauthenticated attackers to mark arbitrary orders as paid, or to mark genuinely paid orders as failed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just free it on
completion if it was already cancelled. Also remove the warnings since
they can trigger in the intended architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: downgrade zerocopy managed frags before mutating skb frags
On the out-of-place output path (esp->inplace == false) ESP rewrites the
skb frag array: esp_output_head() appends a trailer frag and
esp_output_tail() replaces the frags with a destination page, both
referenced with get_page().
When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the
payload frags are owned by the ubuf and must not be referenced or
unreferenced individually, but ESP mutates the frag array without ever
downgrading the skb. This breaks the managed-frag invariant two ways:
- esp_ssg_unref() walks the source scatterlist and drops a page
reference for every frag, including the ubuf-owned payload frags,
pushing their refcount below the GUP pin bias while the pages are
still pinned, i.e. a use-after-free of the zerocopy pages;
- esp_output_tail() installs its destination page as frag 0 with
get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so
skb_release_data() takes the skip_unref branch and never drops that
reference, leaking the x->xfrag page at packet rate.
Fix this the way every other frag-mutating site does (__ip_append_data(),
__ip6_append_data(), tcp_sendmsg_locked()) and call
skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes
a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS,
so the per-frag unref in esp_ssg_unref() and the frag release in
skb_release_data() are both balanced and no mixed-ownership frag array is
left behind. |
| The Yaad Sarig Payment Gateway For WC WordPress plugin before 2.2.13 does not verify authorization or that the requesting user owns the target order in several of its order payment-processing actions, allowing any authenticated user, including subscribers, to act on and alter orders belonging to other customers. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in SERVIT Software Solutions affiliate-toolkit affiliate-toolkit-starter allows Blind SQL Injection.This issue affects affiliate-toolkit: from n/a through 3.9.1. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Sarah Giles Dynamic User Directory dynamic-user-directory allows Blind SQL Injection.This issue affects Dynamic User Directory: from n/a through 2.4. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Use of released resource in Session in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| Observable discrepancy in Scroll in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted Chrome extension. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: fix refcount bug in iwpm_get_nlmsg_request()
iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail()
making it accessible to global list where another CPU can kref_get()
on nlmsg_request causing a refcount "addition on 0" bug. Fix this
by initializing kref _before_ list_add_tail() so refcount for
nlmsg_request can be incremented/decremented normally. In addition,
also initialize every field before list_add_tail(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Serialize join and leave on copy_to_user failure
rdma_join_multicast() queues RoCE work that later reads the ucma_multicast
through event->param.ud.private_data, then list_add()s the CMA multicast
at the head of id_priv->mc_list. rdma_leave_multicast() matches only by
sockaddr and destroys the first hit.
ucma_process_join() used to drop ctx->mutex after a successful join and
retake it only if copy_to_user() failed. Two concurrent JOIN_MCAST calls
with the same address can therefore insert a second CMA entry before the
first thread's leave. leave then cancels the newer work and the older
worker still dereferences the ucma_multicast that the first thread frees.
Keep ctx->mutex held from rdma_join_multicast() through copy_to_user() and,
on -EFAULT, through rdma_leave_multicast() so leave cannot miss this join.
Do not leave if join itself failed: that path never published this address
on mc_list, and a leave-by-addr would destroy an earlier successful join. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent freeing a timer which is queued on the expiry list
Kijo analyzed another race in the POSIX CPU timer code:
Commit bf635681c906 converted cpu_timer::firing from a tristate value to a
boolean. This lost the distinction between "not owned by the firing list"
and "still owned, but delivery was canceled". The resulting race is:
expiry handler timer_settime() timer_delete()
-------------- --------------- --------------
collect timer onto
private firing list
firing = true
observes firing = true
firing = false
return TIMER_RETRY
wait for handler
observes firing = false
finish deletion
unhash and free timer
resume list traversal
read freed elist.next
-> UAF
The firing bit is clearly the wrong indicator since that commit.
Check whether the timer is queued on the expiry list or not instead. If it
is queued clear the firing bit to prevent signal delivery as before and
return TIMER_RETRY so the caller unlocks the timer which allows the expiry
code to make progress and remove it from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject()
syzbot reported a suspicious RCU usage warning in ip6_pkt_drop():
WARNING: suspicious RCU usage in ip6_pkt_drop
include/net/addrconf.h:389 suspicious rcu_dereference_check() usage!
Call Trace:
__in6_dev_get_safely include/net/addrconf.h:389 [inline]
ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620
ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651
xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486
When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through
workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue,
the reinjection loop ceased running in softirq context. Workqueue workers
run in process context where local_bh_disable() does not enter an RCU
read-side critical section under CONFIG_PREEMPT_RCU.
Because finish callbacks (such as ip6_rcv_finish) expect to run under an
RCU read lock (performing route lookups, l3mdev lookups, and accessing
RCU-protected data structures), invoking them in workqueue context without
rcu_read_lock() triggers RCU lockdep warnings.
Furthermore, packets queued to the workqueue via xfrm_trans_queue_net()
may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref).
Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev
with blackhole_netdev, so dst entries do not keep skb->dev alive while
queued in the workqueue.
Fix these issues by:
1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the
caller's RCU section to ensure dst is reference-counted before queuing.
2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue
deferral so skb->dev remains valid during finish() callback processing.
3. Acquiring rcu_read_lock() around the finish callback invocation loop in
xfrm_trans_reinject(). |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
