| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: stk1160: fix bounds checking in stk1160_copy_video()
The subtract in this condition is reversed. The ->length is the length
of the buffer. The ->bytesused is how many bytes we have copied thus
far. When the condition is reversed that means the result of the
subtraction is always negative but since it's unsigned then the result
is a very high positive value. That means the overflow check is never
true.
Additionally, the ->bytesused doesn't actually work for this purpose
because we're not writing to "buf->mem + buf->bytesused". Instead, the
math to calculate the destination where we are writing is a bit
involved. You calculate the number of full lines already written,
multiply by two, skip a line if necessary so that we start on an odd
numbered line, and add the offset into the line.
To fix this buffer overflow, just take the actual destination where we
are writing, if the offset is already out of bounds print an error and
return. Otherwise, write up to buf->length bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix use-after-free of timer for log writer thread
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: Fix buffer size for tag 66 packet
The 'TAG 66 Packet Format' description is missing the cipher code and
checksum fields that are packed into the message packet. As a result,
the buffer allocated for the packet is 3 bytes too small and
write_tag_66_packet() will write up to 3 bytes past the end of the
buffer.
Fix this by increasing the size of the allocation so the whole packet
will always fit in the buffer.
This fixes the below kasan slab-out-of-bounds bug:
BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0
Write of size 1 at addr ffff88800afbb2a5 by task touch/181
CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x70
print_report+0xc5/0x610
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
? kasan_complete_mode_report_info+0x44/0x210
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
kasan_report+0xc2/0x110
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
__asan_store1+0x62/0x80
ecryptfs_generate_key_packet_set+0x7d6/0xde0
? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10
? __alloc_pages+0x2e2/0x540
? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d]
? dentry_open+0x8f/0xd0
ecryptfs_write_metadata+0x30a/0x550
? __pfx_ecryptfs_write_metadata+0x10/0x10
? ecryptfs_get_lower_file+0x6b/0x190
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
? __pfx_path_openat+0x10/0x10
do_filp_open+0x15e/0x290
? __pfx_do_filp_open+0x10/0x10
? __kasan_check_write+0x18/0x30
? _raw_spin_lock+0x86/0xf0
? __pfx__raw_spin_lock+0x10/0x10
? __kasan_check_write+0x18/0x30
? alloc_fd+0xf4/0x330
do_sys_openat2+0x122/0x160
? __pfx_do_sys_openat2+0x10/0x10
__x64_sys_openat+0xef/0x170
? __pfx___x64_sys_openat+0x10/0x10
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f00a703fd67
Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f
RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67
RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c
RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941
R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040
</TASK>
Allocated by task 181:
kasan_save_stack+0x2f/0x60
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x25/0x40
__kasan_kmalloc+0xc5/0xd0
__kmalloc+0x66/0x160
ecryptfs_generate_key_packet_set+0x6d2/0xde0
ecryptfs_write_metadata+0x30a/0x550
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
do_filp_open+0x15e/0x290
do_sys_openat2+0x122/0x160
__x64_sys_openat+0xef/0x170
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bfa: Ensure the copied buf is NUL terminated
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential index out of bounds in color transformation function
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: Fix uninit-value in nci_rx_work
syzbot reported the following uninit-value access issue [1]
nci_rx_work() parses received packet from ndev->rx_q. It should be
validated header size, payload size and total packet size before
processing the packet. If an invalid packet is detected, it should be
silently discarded. |
| The web interface of the affected devices process some crafted HTTP requests improperly, leading to a device crash. More precisely, a crafted parameter to billcodedef_sub_sel.html is not processed properly and device-crash happens. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References]. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
Assuming the following:
- side A configures the n_gsm in basic option mode
- side B sends the header of a basic option mode frame with data length 1
- side A switches to advanced option mode
- side B sends 2 data bytes which exceeds gsm->len
Reason: gsm->len is not used in advanced option mode.
- side A switches to basic option mode
- side B keeps sending until gsm0_receive() writes past gsm->buf
Reason: Neither gsm->state nor gsm->len have been reset after
reconfiguration.
Fix this by changing gsm->count to gsm->len comparison from equal to less
than. Also add upper limit checks against the constant MAX_MRU in
gsm0_receive() and gsm1_receive() to harden against memory corruption of
gsm->len and gsm->mru.
All other checks remain as we still need to limit the data according to the
user configuration and actual payload size. |
| In the Linux kernel, the following vulnerability has been resolved:
ppdev: Add an error check in register_device
In register_device, the return value of ida_simple_get is unchecked,
in witch ida_simple_get will use an invalid index value.
To address this issue, index should be checked after ida_simple_get. When
the index value is abnormal, a warning message should be printed, the port
should be dropped, and the value should be recorded. |
| An issue was discovered in includes/CommentFormatter/CommentParser.php in MediaWiki before 1.39.7, 1.40.x before 1.40.3, and 1.41.x before 1.41.1. XSS can occur because of mishandling of the 0x1b character, as demonstrated by Special:RecentChanges#%1b0000000. |
| An issue was discovered in includes/specials/SpecialMovePage.php in MediaWiki before 1.39.7, 1.40.x before 1.40.3, and 1.41.x before 1.41.1. If a user with the necessary rights to move the page opens Special:MovePage for a page with tens of thousands of subpages, then the page will exceed the maximum request time, leading to a denial of service. |
| An issue was discovered in uriparser through 0.9.7. ComposeQueryEngine in UriQuery.c has an integer overflow via long keys or values, with a resultant buffer overflow. |
| Improper processing of some parameters of installed_emanual_list.html leads to a path traversal vulnerability. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References]. |
| An os command injection vulnerability exists in the CWMP SelfDefinedTimeZone functionality of Grandstream GXP2135 1.0.9.129, 1.0.11.74 and 1.0.11.79. A specially crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of malicious packets to trigger this vulnerability. |
| An reflected XSS vulnerability exists in the handling of invalid paths in the Flask server in Ankitects Anki 24.04. A specially crafted flashcard can lead to JavaScript code execution and result in an arbitrary file read. An attacker can share a malicious flashcard to trigger this vulnerability. |
| FFmpeg version n6.1 was discovered to contain a heap buffer overflow vulnerability in the draw_block_rectangle function of libavfilter/vf_codecview.c. This vulnerability allows attackers to cause undefined behavior or a Denial of Service (DoS) via crafted input. |
| FFmpeg version n6.1.1 was discovered to contain a heap use-after-free via the av_hwframe_ctx_init function. |
| In PHP 8.3.* before 8.3.5, function mb_encode_mimeheader() runs endlessly for some inputs that contain long strings of non-space characters followed by a space. This could lead to a potential DoS attack if a hostile user sends data to an application that uses this function. |
| An incorrect type conversion vulnerability exists in the DVPSSoftcopyVOI_PList::createFromImage functionality of OFFIS DCMTK 3.6.8. A specially crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability. |
