| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A hidden field manipulation vulnerability was identified in Issuetrak version 17.1 that could be triggered by an authenticated user.
When an authenticated user submits a ticket, the request can be intercepted and subsequently modified by using a proxy. The ticket requester can be changed from the original requester to another user in the same application,
which the application then accepts. |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. |
| A vulnerability in the management and VPN web servers of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability is due to improper validation of user-supplied input on an interface with VPN web services. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on an affected device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| Rustls is a modern TLS library written in Rust. `rustls::ConnectionCommon::complete_io` could fall into an infinite loop based on network input. When using a blocking rustls server, if a client send a `close_notify` message immediately after `client_hello`, the server's `complete_io` will get in an infinite loop. This vulnerability is fixed in 0.23.5, 0.22.4, and 0.21.11. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| SAP NetWeaver Business Warehouse CCAW application allows a privileged attacker to cause a high CPU load by executing a RFC enabled function modules without any input parameters, which results in reduced performance or interrupted operation of the affected resource. This leads to low impact on availability of the application, there is no impact on confidentiality and integrity. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. This vulnerability allows a user to maneuver the Webfinger mechanism to perform a GET request to any internal resource on any Host, Port, URL combination regardless of present security mechanisms, and forcing the victim’s server into an infinite loop causing Denial of Service. Moreover, this issue can also be maneuvered into performing a Blind SSRF attack. This vulnerability is fixed in 1.0.14, 1.1.11, 1.2.11, and 1.3.4. |
| A Denial of Service (DoS) vulnerability in the multipart request boundary processing mechanism of the Invoke-AI server (version v5.0.1) allows unauthenticated attackers to cause excessive resource consumption. The server fails to handle excessive characters appended to the end of multipart boundaries, leading to an infinite loop and a complete denial of service for all users. The affected endpoint is `/api/v1/images/upload`. |
| While assignment of a user to a team (bracket) in CTFd should be possible only once, at the registration, a flaw in logic implementation allows an authenticated user to reset it's bracket and then pick a new one, joining another team while a competition is already ongoing.
This issue impacts releases from 3.7.0 up to 3.7.4 and was addressed by pull request 2636 https://github.com/CTFd/CTFd/pull/2636 included in 3.7.5 release. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| Policy bypass in IFrameSandbox in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Improper Encoding or Escaping of Output vulnerability in the JsonAccessLogValve component of Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.40 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117 , which fix the issue. |
| CEWE PHOTO SHOW 6.4.3 contains a denial of service vulnerability that allows attackers to crash the application by submitting an excessively long buffer to the password field. Attackers can paste a large string of repeated characters into the password input during the upload process to trigger an application crash. |
| Loop with unreachable exit condition ('infinite loop') vulnerability in The Wikimedia Foundation Mediawiki - GrowthExperiments Extension allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions. This issue was remediated only on the `master` branch. |
| Calling gethostbyaddr or gethostbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend in the GNU C library version 2.34 to version 2.43 could result in an invalid DNS hostname being returned to the caller in violation of the DNS specification. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, a Denial of Service (DoS) vulnerability exists in the node-forge library due to an infinite loop in the BigInteger.modInverse() function (inherited from the bundled jsbn library). When modInverse() is called with a zero value as input, the internal Extended Euclidean Algorithm enters an unreachable exit condition, causing the process to hang indefinitely and consume 100% CPU. Version 1.4.0 patches the issue. |
| The Backuply – Backup, Restore, Migrate and Clone plugin for WordPress is vulnerable to Denial of Service in all versions up to, and including, 1.2.6. This is due to direct access of the backuply/restore_ins.php file and. This makes it possible for unauthenticated attackers to make excessive requests that result in the server running out of resources. |
| Serialize JavaScript to a superset of JSON that includes regular expressions and functions. Prior to version 7.0.5, there is a Denial of Service (DoS) vulnerability caused by CPU exhaustion. When serializing a specially crafted "array-like" object (an object that inherits from Array.prototype but has a very large length property), the process enters an intensive loop that consumes 100% CPU and hangs indefinitely. This issue has been patched in version 7.0.5. |
| NanoMQ v0.22.7 is vulnerable to Denial of Service (DoS) due to improper resource throttling. A crafted sequence of requests causes the recv-q queue to saturate, leading to the rapid exhaustion of system file descriptors (FDs). This exhaustion triggers a process crash, rendering the broker unable to provide services. |
| Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop. |
